The epoxy molding compounds (EMC) was prepared by hot pressing molding method.
采用热模压法制备了环氧模塑料（EMC）。
Abstract :The silica based ceramic cores were formed by hot pressure molding method.
采用热压注工艺成型氧化硅基陶瓷型芯。
The var SEC sweep molding method, a universal 3-d design method for disc CAM is presented.
提出一种盘形凸轮三维通用设计方法—可变截面扫描成型法。
But this problem will be settled preferably by using synchro-air-stream impact molding method.
应用同步气冲造型法，较好地解决了气冲造型存在的漏斗堵塞问题。
The upwards convex table board is formed by a secondary mould pressing and one-step molding method.
本发明的方法采用二次模压一次成型的方法形成上凸台面。
Molding method, process, and equipment of injection molding of molding compound had been discussed in this paper.
论述了模塑料注射成型的方法、工艺、设备和模具设计方面的问题。
The waste plastic is molded using a molding method of extruding it from a nozzle of a screw-type stuffing machine.
采用使用螺杆式压入机将该废塑料从喷嘴挤出的成型方法进行成型。
It introduced the processing technology of the product from composite materials by means of rotational molding method.
介绍了利用旋转模塑方法成型复合材料制品工艺。
The molding method, process, and the equipment of thermoset runnerless injection molding have been discussed in this paper.
论述了无流道热固性塑料注射成型的方法、工艺、设备和模具设计方面的问题。
In this paper, the compact mechanism of molding method and the effect of compact result which were attributed by the configur…
本文就成型压板的过流面积、凸块高度等结构因素对紧实效果的影响及这种造型方法的紧实机理进行了探讨。
Gelcasting process is a new molding method that can prepare high homogeneous, high density, complicated shape ceramic products.
注凝成型工艺是一种可制备高均匀性、高密度、复杂形状陶瓷制品的新型成型方法。
The study demonstrated that the principle of rotating injection molding method is successful and it can be well used in the production.
通过研究证明旋转注射成型方法的原理是成功的，同时也证明旋转注射成型方法能够很好的应用于生产实践。
Injection molding method, process, and the equipment of themoset compression injection molding without runner was discussed in this paper.
论述了无流道注压成型的方法、工艺、设备和模具设计方面的问题。
Heat treatment blister is one of common defects of squeeze casting parts, which has some relations with molding method, process and mould.
热处理起泡是挤压铸件常见的缺陷之一，它与挤压方式、工艺、模具等有关。
The special screw is manufactured with the molding method and non-instantaneous envelope method on the numerical control millers generally.
异形螺杆的加工一般采用成型法及无瞬心包络铣削方法在专用数控铣床上进行。
The methods of moral education should mainly contain the behavior practice method, the self education method and the emotion molding method.
德育工作方法应以行为实践法、自我教育法、情感陶冶法为主；
The molding method and the die of the invention can simplify the production process, improve the quality of products and lower the production cost.
本发明中的成型方法与模具可简化生产工艺，提高产品质量，降低生产成本。
They will make use of the Nano Molding Method (NMT) that fuses the plastic against the etched metal, removing the need for various attachment latches or slots.
他们将利用纳米成型法(NMT)，融合了塑料对金属的腐蚀，不再需要各种附件锁存器或插槽。
The method for preparing the antistatic caster wheel can adopt an extruding method by an extruder or an injection molding method by an injection molding machine.
抗静电脚轮的制备方法可以采用挤出机挤出或注塑机注塑的方法。
The single air impulse molding is also investigated as a contrast of the new method. It was shown that the new method is markedly prior to the single air impulse molding method.
对比研究了气冲气推多触头压实实砂和单纯气冲造型的实砂效果，表明气冲气推压实实砂比单纯的气冲造型实砂效果好。
The invention also provides a method for measuring density of the graded broken stone tabular specimen prepared by the graded broken stone tabular specimen wheel mill molding method.
本发明还提供一种测量采用 上述级配碎石板状试件轮碾成型方法所制备的级配碎石板状试件密度的方法。
By adopting the molding method and the film hot press forming mold, wrinkling in the corner of the film insert can be effectively avoided, thus enhancing the quality of the film insert.
采用本发明中的成型方法及薄膜热压成型模具，可有效防止薄膜镶件在边角位置起皱，提高薄膜镶件的质量。
The highest volume molding method, in which the material is forced from an external heated chamber through a sprue, runner or gate into a cavity of a closed mold by means of high pressure.
容量最大的造模法，通过高压的作用材料从外部加热室通过铸口、流道或浇口进入闭式压膜室。
The effect of the technological conditions such as molding method, raw material proportioning, pugging times and sintering system on the performances of porous permeable bricks was studied.
研究了成型方法、原料配比、成型压力、练泥遍数及烧成制度等工艺条件对多孔透水砖性能的影响。
Blow molding is the main molding method for the hollow plastic products, including three steps such as parison formation, parison inflation and cooling solidification in its molding process.
吹塑成型是成型中空塑料制品的主要成型方法，其成型过程包括型坯成型、型坯吹胀和制品的冷却固化三个阶段。
Like compression molding, this method is used to form thermoset materials and involves permanently curing the plastic in a mold under heat and pressure.
像压缩成型，使用这种方法，形成热固性材料和涉及永久固化塑料模具在高温下和压力。
Complex parts only can adopt the method of multi-box molding, difficulty is increased, casting is easy to cause dislocation, increase the workload of cleanup and machining.
复杂件只能采用多箱造型的方法，难度增加，铸件容易产生错位，增加清理和机加工的工作量。
Therefore, if the foreign plants adopt plastic extrusion molding for over-voltage crosslinked polythene cable, they currently adopt "plastic extrusion sulfuration by layers" method.
因此国外厂家对超高压交联聚乙烯电缆如果采用“挤塑模铸法”，目前均采取“分层次挤塑硫化”工艺方式。
Based on technology "grafting", the principle and method of compound molding for CAM casting are presented in the paper, and some other examples are given to prove them.
本文以工艺“嫁接”为基础，用凸轮铸件作实例介绍了复合造型的原理和方法，并列举了其它实例予以说明。
The vibration injection molding and mold design method are discussed by the application of the mechanical vibration technology in the injection molding of plastics.
通过对机械振动技术在塑料注射成型中的应用，探讨振动注射成型工艺及其模具设计方法。
应用推荐