The panel method was used to predict the wake flow field of propeller.
利用单斜丝热线旋转进行水平轴风力机模型的尾迹流场测量。
Both panel method and lifting surface method can be used to calculate the unsteady force.
非定常力可以采用面元法或升力面方法计算得到。
Two coupled schemes for panel method are adopted:(1)coupled at each step of propeller design process;
导管的面元计算采用两种方案进行偶合：（1）在桨升力面设计过程中每一步偶合；
A vortex panel method is presented to simulate low speed inviscid separated flow past an airfoil with a spoiler.
本文介绍用涡面元法模拟带扰流片的翼型低速无粘分离绕流。
The wave problem is predicted by adopting panel method based on Kelvin source for a ship traveling in a uniform flow.
采用基于开尔文源的面元法求解航行于均匀流场中的船舶兴波问题。
Aerodynamic force, moments, and longitudinal stability derivatives are estimated by three-dimensional low-order panel method.
涉及的气动力、力距和纵向稳定导数等则由三维低阶板块法计算获得。
Germs and coliform group in purified water and spring water of Yanan City were detected by the plat panel method and much tube ferment method.
用平板培养法及多管发酵法对延安市部分市售纯净水及泉水中的细菌及大肠菌群进行了检测。
Panel Method was used for subsonic aerodynamic analysis, and the Modified Newtonian Impact Theory was used for hypersonic aerodynamic analysis.
亚声速气动力采用面源法计算，高超声速气动力采用修正的牛顿流理论计算。
A potential-based surface panel method is applied to predicting the performance for three-dimensional hydrofoils, with emphasis on the tip region.
该文应用低阶速度势面元法建立了预报三维水翼水动力性能的数值方法，重点对翼梢和尾涡进行了研究。
The surface panel method and an improved numerical Kutta condition have been applied to predict the hydrodynamic performance of a propeller in steady flow.
本文采用面元法和改进的数值库塔条件预报螺旋桨定常性能。
In this paper, based on the second generation low order panel method, a computational method of potential flow around wings under high-lift configuration is given.
本文采用第二代低阶面元法给出了一种高升力外形下机翼的位流计算方法。
This research is useful in predicting of the hydrodynamic performance and in enhancing the prediction precision of the propeller by using High-Order Surface Panel Method.
本论文的研究为高阶面元法预报螺旋桨的水动力性能打下了一定的基础，对进一步提高面元法预报的精度具有一定的实用意义。
Based on panel method, the mathematic model of partial-cavity flow field for axisymmetric body is given by use of the sources of distributing on the bodies and cavity surfaces.
基于面元法，通过在回转体和空泡表面分布源汇的方法，建立了求解轴对称回转体局部空泡流场的数学模型。
In order to analyze the influence of fins, a low-order panel method based on velocity potential was used to predict the steady hydrodynamic performance of a podded propeller with fins.
为了分析鳍对吊舱推进器水动力性能的影响，用基于速度势的低阶面元法预报附鳍吊舱推进器的定常水动力性能。
This paper sets the theoretical and numerical method predicting the unsteady pressure distribution on the propeller blade surface by using perturbation potential based on surface panel method.
本文建立了扰动速度势面元法预报螺旋桨表面非定常压力分布的理论和数值方法。
This means that if the instruction calls other methods, even in other classes, and those methods call others, and so on, the editor panel jumps to the applicable method.
这表示如果指令调用其他方法(甚至是其他类中的方法)，而这些方法又调用其他方法等等，那么编辑器面板将切换到可用方法。
The best method is to edit a locked perspective from the Perspective Display panel, and then save the modified perspectives to a new name.
最好的方法是从PerspectiveDisplay面板编辑一个锁定的透视图，然后将修改后的透视图另存为一个新名称。
In this code, you can't return a value, so you must add the newly created toppings panel to the parent as part of this method.
在这段代码中，不能返回值，因此必须将新创建的Toppings面板作为此方法的一部分添加到父面板中。
This particular method builds and embeds a DataTable object in a panel for a configuration invocation of an ACLPerspective based on the actor view.
这一特定方法可以构建DataTable对象并基于参与者视图将其嵌入到ACLPerspective的配置调用的面板中。
The second view method, panel(), is much shorter. It's shown in Listing 9.
第二个视图方法panel() 则更为简短，如清单 9 所示。
A simple and accurate method to calibrate the BRF of a reference panel in laboratory is recommended.
提出了一种简单、精确的标定参考反射板双向反射因子的方法。
This paper introduced a position control system method that used the digital and electronical technique to improve the old type panel saw .
介绍了一种利用数字电子技术改造老式裁板锯机位置控制系统的方法。
Circular grid method appears effective in solving technological problems of large stamping components with complex shape especially of automotive panel.
在解决大型复杂形状冲压件，尤其是汽车覆盖件的冲压生产技术问题时，圆网格方法已卓有成效。
A design method of a driving circuit for flat panel display based on FPGA is introduced.
介绍了一种基于FPGA的平板显示器件驱动电路的设计方法。
The design of the body tracing system is finalized with the development of the vehicle production queue method and sort programme and the touch panel information collecting programme.
编写了对车辆生产队列进行整理、排序程序和触摸屏信息采集程序，从而完成了整个车身跟踪系统的设计工作。
This thesis introduces the function, wire and checking method of the Songzhi air conditioner control panel used in Yutong coaches.
介绍宇通客车用松芝空调器控制面板接口每个引脚的功能接线及检测方法。
Handy light-weight wheel load scale. hand panel with digital display unit. wire strain gauge measuring method.
轻便的轮重仪。带数字显示装置的手动面板。丝式应变计测量方法。
Display panel, light emitting display device using the same, and driving method thereof.
显示板，使用该显示板的发光显示设备，及其驱动方法。
The experiment indicates that the incremental bending forming technology is a reasonable and effective method to form the integral panel with complete structure and some curvatures.
试验证明，增量压弯成形工艺是成形具有一定曲率外形的复杂结构整体壁板的合理而有效的方法。
The experiment indicates that the incremental bending forming technology is a reasonable and effective method to form the integral panel with complete structure and some curvatures.
试验证明，增量压弯成形工艺是成形具有一定曲率外形的复杂结构整体壁板的合理而有效的方法。
应用推荐