Plastic limit analysis is a physical nonlinear Problem.
塑性极限分析是物理非线性问题。
The plastic limit analysis is applied to the unstable fracture load.
对失稳断裂载荷进行了塑性极限分析。
This paper describes the lower bound theory of 3-d plastic limit analysis.
介绍了三维塑性极限分析下限法的基本原理。
Enrich the plastic limit analysis of cylindrical shell under axisymmetric loads.
丰富了圆柱壳在轴对称荷载作用下的塑性极限分析。
The theory and method of the plastic limit analysis are introduced systematically.
系统地介绍了结构塑性极限分析的原理和方法。
The plastic limit analysis was applied to calculate the stability of jointed rock slopes.
运用有限元塑性极限分析方法研究节理岩质边坡的稳定性。
The plastic limit analysis of cylindrical reticulated shells has been studied in this paper.
本文探讨了圆柱形网壳结构的塑性极限分析。
In this paper, the method of weighted residual is applied to the structural plastic limit analysis.
本文将加权残数法应用于结构的塑性极限分析。
Based on the traditional plastic limit analysis, an improved rigid-nonlinear Hardening approximate model is established.
应用传统的极限分析理论，提出一种改进的刚性-非线性强化近似模型。
Some can get holomorphy solutions. In the course of plastic limit analysis, maybe there are the phenomena of producing yield-line.
在规则边界的薄板的塑性极限分析过程中，通常会有产生塑性铰线这一现象。
By introducing the generalized method of cells (GMC) into plastic limit analysis, the bearing capacity of ductile composites is studied.
本文将细观力学中的单胞(GMC)模型运用到塑性力学的静力极限分析中，研究韧性复合材料的塑性极限承载能力。
The parametric variational principle may be used to finite element analysis as in plastic limit analysis and in elastic contact problems.
如同弹性接触问题及极限分析中那样，该原理可望用于有限元数值分析中。
The plastic limit analysis and parametric design of a hollow cast steel roll with axle sleeve of the high-speed paper machine are studied.
研究了高速纸机中具有闷头的空心铸钢辊结构的塑性极限和参数设计问题。
The yield criterion of composite materials is simulated by using the homogenization method of micromechanics and the plastic limit analysis theory.
运用细观力学中的均匀化方法和塑性力学中的极限分析理论，分析了复合材料的屈服准则。
In the plastic limit analysis, the wrinkler's plate is smartly analyzed in yield-line theory to get the critical compression strength of the coal pillar.
在分析过程中，利用机动法对温克尔地基板（弹簧支撑板）进行了塑性极限分析，得出了煤柱抗压强度的临界值。
Advances an improving rigid nonlinearity hardening approximate model of the constitutive relations using the traditional theory of plastic limit analysis.
应用传统的极限分析理论，对可简化为刚塑性的材料本构关系提出了一种改进的“刚性-非线性强化”近似模型。
The plastic limit analysis made in this paper shows that one-way shear failure cannot be the most critical among possible shear-type failures of pile-caps at corners.
本文用塑性极限方法证明，在角桩上可能发生的剪切型破坏中，单向剪切不起控制作用。
Appraising the current methods of slope stability, the paper puts forward Finite Element Plastic Limit Analysis of the slope stability subjected to pore water pressure.
本论文对目前用于边坡稳定性评价的主要方法进行了研究对比后，提出了考虑孔隙水压力条件下的边坡有限元塑性极限分析法。
Since normal plastic theory is too complex, the membrane theory and the semi-membrane theory are adopted to establish the equilibrlm equations in plastic limit analysis.
鉴于有矩理论的复杂性，本文在作极限分析时，采用了无矩理论和半无矩理论的平衡方程分别作为中短壳和长壳的平衡方程。
In this paper the reason and criterion of the application of the model to plastic limit analysis are discussed, and an algorithm of computing plastic limit load is given.
文中讨论了该模型适用于全塑性分析的机理和判据，还设计了一个确定塑性极限载荷的算法。
On the basis of appraising the existing analytical methods of slope stability, the plastic limit analysis using finite elements is put forward to analyze the slope stability.
在评价现有边坡稳定分析方法的基础上，提出了边坡稳定的有限元塑性极限分析方法。
A modified three-dimensional plastic limit analysis method is proposed for lateral bearing capacity of the large-diameter pipe pile in the inhomogeneous and anisotropic soft ground.
对于非均质各向异性软土地基上管桩基础的承载力，基于塑性极限分析理论考虑软土强度的非均质与各向异性效应，提出了一种改进的三维极限分析上限解法。
In this paper, the method of singularity function is applied to the structural plastic limit analysis, and simplified the calculation of limit loads of some annular plates of fixed supports.
本文将奇异函数法应用于结构的塑性极限分析，简化计算某些固支环形板的极限荷载。
This paper studies the bounding problems of the complete solution of limit analysis for a rigid-perfectly plastic medium, allowing for discontinuity of plastic flow.
本文研究了非连续流动场中，刚塑性介质极限分析完全解的界限问题。
However, until now the internal friction is only considered in limit analysis and plastic mechanics, but not included in elastic mechanics and energy theory.
然而，至今只有岩土极限分析与塑性力学中考虑岩土体的内摩擦力，而在弹性理论与能量理论等诸方面均未体现。
The correlation model of liquid-plastic limit has been built by regression analysis of experimental data of clayey soil in the east of Mudanjiang.
该文通过对牡丹江以东六个地区粘性地基土液、塑限试验数据的回归分析，建立了各地区的液、塑限相关模型。
The analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.
最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。
Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.
按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。
The slope stability analysis is studied with the nonlinear failure criterion based on the plastic upper limit theorem.
利用塑性分析上限定理，考虑岩土介质本身的非线性破坏准则，对各种不同破裂面边坡稳定性分析进行研究。
The slope stability analysis is studied with the nonlinear failure criterion based on the plastic upper limit theorem.
利用塑性分析上限定理，考虑岩土介质本身的非线性破坏准则，对各种不同破裂面边坡稳定性分析进行研究。
应用推荐