Then there is reheating furnace, reducing mill and cooling table.
然后进入再热炉、减径机和冷却床。
Reheating furnace is an important heat device in steel tube production.
再加热炉是钢管生产中主要的加热设备。
The service life of the reheating furnace has been prolonged when it was used.
通过在轧钢加热炉上的喷补实践，较大地延长了加热炉的使用寿命。
Mathematical Model for delay process of a reheating furnace is studied in this paper.
本文对加热炉待轧过程进行了数学模型的研究。
The reformation of side discharge roll table of continuous reheating furnace is introduced.
介绍了端出料连续式加热炉炉头辊道的改造。
A new method to estimate optimum heating operation for reheating furnace is presented in this paper.
提出了计算加热炉最佳加热制度的一种新方法。
The practical production show that the converter gas can be used in reheating furnace of steel rolling.
实践证明，轧钢加热炉使用转炉煤气是可行的。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
由于再加热炉出料方式设计上的原因，限制了PQF轧机生产线的轧制节奏，从而影响产量。
The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.
主要讨论如何基于工件(钢锭、钢坯等)的热状态来进行均热炉的优化控制。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
This paper introduces emphases, difficulty and countermeasure in the construction of pusher type continuous reheating furnace.
阐述中厚板推钢式加热炉施工中的重点、难点问题以及解决方法。
This paper introduces new a kind of type structure of energy conservation reheating furnace, analyses the function characteristic.
介绍了一种新型节能加热炉的结构形式，并对其性能特点进行了分析。
This paper described the application of double cross limiting range combustion control system in the walking beam reheating furnace.
介绍了双交叉限幅燃烧控制系统在唐钢步进式轧钢加热炉上的应用。
This paper introduces that the combustion technology of coal-water-slurry (CWS) can be applied successfully to the reheating furnace.
本文研究了水煤浆燃烧技术在轧钢加热炉上的应用，并获得成功。
This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.
本文介绍了锡兴钢铁公司，为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。
In addition, the writer studies optimize control based on intellect predicting of temperature field of reheating furnace iron bodies.
另外，作者还对基于钢坯温度场智能预报的加热炉最优控制进行了研究。
The principal aspects and effects of reconstruction and operation improvement of the reheating furnace at Yingkou Plate Mill are discussed.
论述了营口中板厂加热炉结构改造和操作改进的基本内容和效果。
At present, the chain grates have been extensively applied to medium-and small-size coal-fired reheating furnace, and good effects achieved.
目前，链式炉排已广泛地应用于中小型燃煤加热炉，并取得了可喜的成果。
The blast furnace gas as fuel of high temperature reheating furnace is an important technology for energy-saving and environmental protection.
高炉煤气作为高温加热炉单一燃料是节约能源和改善环保的重要技术措施。
In this paper, PCA and statistical control chart have been used to detect process operating faults on an industrial rolling mill reheating furnace.
针对轧钢加热炉这类典型的工业生产过程，运用多元统计投影技术进行了故障检测与诊断的研究。
The new process and technology on the "gas replace heavy oil" engineering project for reheating furnace of the 1700 hot strip in WISCO are introduced.
介绍了武钢1700热轧加热炉＂油改气＂燃料替代改造工程中采用的新工艺及技术。
The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
以某轧钢厂的一台步进梁式加热炉为例，计算了钢坯表面热流沿炉长方向的分布，并反算求解总括热吸收率。
The structures and thermotechnical characteristics of reheating furnace heads of the traditional, useless-space reduced and short-landslide types are discussed.
论述了端出料轧钢加热炉“传统”炉头、“少闲区”炉头、“短滑坡”炉头的构造及其在热工方面的特性。
The functions of the system, i. e. all kinds of working parameters of reheating furnace are traced real-timely and automatically alarm over limit, are introduced.
该系统具有对被加热钢坯位置和主要热工参数的实时跟踪，以及对加热炉各种操作参数的实时跟踪和过限报警等功能。
In order to resolve the billet-jamming problem during plate production, the real-time tracing system for billet of pushing reheating furnace has been established.
针对中厚板生产中出现的钢坯混钢问题，建立了推钢式加热炉钢坯实时跟踪系统。
This paper presents a tactics of computer control of reheating furnace with coal powder. With this tactics, fuel savings are maximized and heating quality is improved.
开发了煤粉加热炉计算机控制策略，该策略不仅能最大程度地节能，而且保证了出钢温度的准确控制。
This paper establishes a continuous dynamic mathematic model of reheating furnace and based on which, resolves the problem of minimum consumption control of the furnace.
以某钢厂推钢式连续加热炉为背景，建立了加热炉的动态数学模型，并在此基础上解决了加热炉最小能耗优化控制问题。
This paper establishes a continuous dynamic mathematic model of reheating furnace and based on which, resolves the problem of minimum consumption control of the furnace.
以某钢厂推钢式连续加热炉为背景，建立了加热炉的动态数学模型，并在此基础上解决了加热炉最小能耗优化控制问题。
应用推荐