Response surface methodology design was used to design and evaluate the experiment.
采用响应面法设计优化实验。
The ethanolysis of safflower oil was optimized through the response surface methodology.
利用响应面法对红花油的乙醇解反应进行了优化研究。
Central composite design and response surface methodology was applied to optimize the formulation.
目的采用星点设计-效应面优化法优选干姜提取工艺。
Response Surface Methodology (RSM) is one of the main approaches for quality improvement and optimization.
响应曲面法是质量改进与优化的主要工具。
The linkage between response model methodology and dual response surface methodology has also been presented.
本文还通过一个实例说明响应建模法能从试验数据中获取更多的信息。
The optimum ratio of GE, PE, PC, Vc and CA was 30:60:20:1:2, and it was obtained by response surface methodology.
通过响应面分析法得到了的具有最佳抗氧化性的复合天然抗氧化剂，其各成分比例为30：60：20：1：2。
The optimal conditions for ultrasonic extraction of Hypericaceae were determined by response surface methodology.
运用响应面法确定超声提取田基黄的最佳条件。
The optimization of the formulation could be achieved by the central composite design-response surface methodology.
星点设计效应面法可用于微丸处方的优化。
Objective: To optimize the extraction craft of Xiaochuang gel by central composite design-response surface methodology.
目的：采用星点设计-效应面法优选消疮凝胶剂的提取工艺。
Finally, the concentrations of key components were confirmed by central composite design and response surface methodology.
最后用中心组合设计和响应面分析法，确定了主要影响因子的浓度。
From the economical Angle, it has been proposed that the dual response surface methodology has more advantages than parameter design.
从经济角度出发，分析和阐述替代参数设计的更优设计方法——双响应曲面法。
The results showed that the optimization process using response surface methodology was feasible. It can be used in practical forecasting.
试验表明，响应面法对太白贝母粗多糖提取条件的优化是可行的，可用于实际预测。
This research applies central composite design and response surface methodology to optimize the process parameters of SEBS modified asphalt.
本研究应用星点设计效应面优化法对SEBS改性沥青工艺进行优化。
The results shows that robust design based on response surface methodology is a promising approach to improve the quality of the micro-motor.
结果表明：基于响应面模型的稳健设计是提高微电机质量的一种有效途径。
Response surface methodology (RSM) was applied to optimize enzymatic hydrolysis of defatted silkworm pupa protein by commercial animal proteases.
采用响应曲面法对动物蛋白酶水解脱脂蚕蛹蛋白的工艺进行优化。
Abstract: Response surface methodology was applied to optimize the drug loading rate of persimmon leaf total flavonoids sustained release pellets.
摘要：本文研究了响应面法优化柿叶总黄酮缓释微丸的载药量。
The uniform design and response surface methodology(RSM) are applied to the multi-objective optimization of a 2-D mixed compression scramjet inlet.
基于响应面法进行了二维混合压缩超燃冲压发动机进气道的多目标优化研究。
The response surface methodology used for the optimization of ultrasonic-assisted extraction conditions of PLFAs from forest soil was simple and reliable.
表明响应面法超声辅助提取优化磷脂脂肪酸工艺的研究方法简便、可靠。
The response surface methodology was used to study the influences of screw speed, barrel temperature, material moisture and enzyme mass fraction on DE values.
采用响应面分析方法研究了螺杆转速、机筒温度、物料水分和酶质量分数对挤出物de值的影响规律。
OBJECTIVE To optimize the formulation of tinidazole colon-targeted bioadhesive tablets by the central composite design-response surface methodology (RSM plus CCD).
目的通过星点设计-效应面法优化替硝唑结肠靶向生物黏附片处方。
Response Surface Methodology (RSM) was used to gain the optimal parameter of processing and to discuss how the parameters influenced the extraction rate of peptide.
运用响应面分析法优化泥鳅蛋白酶解的工艺条件，探讨了泥鳅蛋白酶解过程中液料比、酶解温度、酶解时间对多肽得率的影响。
Response surface methodology was used to study the effect of different levels of concentration of hydrochloric acid, temperature and time on the extraction rate of calcium.
试验采用响应面法分析研究不同量盐酸浓度、提取温度和反应时间对可溶性钙提取的影响，以探讨盐酸对鳗鱼骨可溶性钙提取的效果。
The test results showed that the central composite design and response surface methodology was suitable to the optimization research of waste tire crumb rubber in asphalt mixture.
将星点设计-效应面优化法应用于橡胶颗粒沥青混合料的级配组成优化是可行的。
The process of simultaneous extraction and hydrolysis in situ for the recovery of diosgenin from rhizomes of Dioscorea zingiberensis was optimized by response surface methodology (RSM).
利用响应面优化法对盾叶薯蓣块茎中薯蓣皂甙元水解原位提取进行研究。
Based on single factor tests, the response surface methodology (RSM) was used to optimize the fermentation technological conditions for producing lactic beverage from black glutinous corn.
在单因素的基础上，利用响应面法对黑糯玉米发酵乳饮料的发酵条件进行了优化。
The effects of different temperature, time and the ratio of solid to solution on the extraction yield of Ganoderma lucidum polysaccharides (GLP) were optimized with response surface methodology.
本研究采用响应曲面法对影响GLP提取率的三个主要影响因素即提取温度、提取时间和液固比进行了优化。
The right extraction method would be chosen for the target product. Ultrasonic-assisted extraction process for maximum flavonoids from the flower was investigated by response surface methodology.
三种方法提取的挥发油化合物组成及含量有差异，针对目标产物选择合适的提取方法。
METHODS Analyse the application of central composite design and response surface methodology in pharmacy experiment design by researching the recent domestic and international documents and files.
方法通过查阅国内外近年来的有关资料和文献，对星点设计效应面法在药学试验设计中的应用进行了分析。
The fatty acid methyl ester content model produced by an enzymatic reaction was presented by a response surface methodology (RSM) on the basis of molecular distillation and single factor experiments.
在分子蒸馏预处理和单因素试验的基础上，采用响应曲面法建立脂肪酶催化反应生成的脂肪酸甲酯含量的数学模型。
The fatty acid methyl ester content model produced by an enzymatic reaction was presented by a response surface methodology (RSM) on the basis of molecular distillation and single factor experiments.
在分子蒸馏预处理和单因素试验的基础上，采用响应曲面法建立脂肪酶催化反应生成的脂肪酸甲酯含量的数学模型。
应用推荐