The multiholed polypropylene film modified by collagen is analyzed with Fourier Transform Infared Photoacoustic Specteoscopy (FTIR PAS) and Scanning electron Microscope (SEM).
用傅里叶变换红外光声光谱(FTIRPAS)和扫描电子显微镜(SEM)对表面涂覆胶原的聚丙烯微孔膜进行了分析。
The products were well-characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM).
所得产物用X射线衍射仪(XRD)和扫描电子显微镜(SEM)进行了表征。
Methods Observing by scanning electron microscope (SEM).
方法采用扫描电子显微镜观察法。
The fracture surfaces of the specimens were observed by a scanning electron microscope (SEM). The AE signals were distinguished as being released from (several) special types of damage.
用扫描电子显微镜(SEM)观测试样的断裂表面，对产生于若干特殊损伤类型的AE信号进行了鉴别。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
A series of examinations and analysis have been made on the ruptured samples of the SWRH72A wire rod by way of optical metalloscope and scanning electron microscope (SEM).
用光学金相显微镜和扫描电子显微镜对SWRH72A盘条拉拔断裂试样进行一系列检验分析。
The morphology of worn surface was analyzed via scanning electron microscope (SEM) and by using a surface profilometer.
通过扫描电子显微镜（SEM）和表面轮廓仪分析配副材料的磨痕表面形貌。
The fracture morphologies were observed by scanning electron microscope (SEM).
利用扫描电子显微镜(SEM)对断口进行观察。
Scanning electron microscope (SEM) was used to observe the microstructure of the composites.
采用扫描电子显微镜（SEM）表征了复合材料的微观组织。
The sample crystalline phase and shapes were analyzed with X-ray diffraction (XRD) and scanning electron microscope (SEM).
采用X射线衍射(XRD)和扫描电子显微镜(SEM)对样品的晶相和形状进行了分析。
Starting from the principle of conventional scanning electron microscope (SEM), the imaging signals used in SEM are listed.
从常规扫描电子显微镜（SEM）的基本工作原理出发，列出了SEM成像信号产生的方式及特点。
Suspended particulate matters in water environment collected from western Xiamen Bay were analyzed using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy(EDS).
利用扫描电子显微镜和X射线能谱仪对在厦门湾采集的水体悬浮颗粒物进行形态观察和X射线能谱微区元素分析。
Scanning electron microscope(SEM) images of TGP-H-060 carbon paper and TGP-H-060 carbon paper treated with poly tetra fluoroethylene(PTFE) were gathered.
通过扫描电子显微镜（SEM）采集了TGP-H-060型碳纤维纸和聚四氟乙烯（PTFE）处理过的TGP-H-060型碳纤维纸的平面图像。
The surface structure of materials and cell adherence in all groups were observed under scanning electron microscope (SEM).
扫描电镜下观察各组材料表面结构及细胞附着情况。
From scanning electron microscope (SEM) and (AFM) atomic force microscope images, it is observed that both grain size and surface roughness are aggrandized greatly after annealing.
从扫描电子显微镜(sem)和原子力显微镜(afm)图像可以观察到，薄膜在退火后其晶粒尺寸和粗糙度都大大增加。
Scanning electron microscope (SEM) and atom force microscope (AFM) were used to characterize the morphologies of the AAO template, respectively.
并采用扫描电子显微镜（SEM）及原子力显微镜（AFM）对AAO模板表面及内部结构进行了表征。
The process of polymerization of silicic acid was observed by transmission electron microscope (TEM) and scanning electron microscope (SEM).
用透射电子显微镜（TEM）和扫描电子显微镜（SEM）观察了硅酸溶胶的聚合过程。
Pollen morphology of 9 species and 1 variety in section Paracamellia was observed and compared by means of light microscope (LM) and scanning electron microscope (SEM).
在光学显微镜和扫描电镜下对短柱茶组9种1变种的花粉进行形态观察和比较研究。
The microstructure and porosity of high speed steel (HSS) prepared by spary forming have been studied with optical microscope and scanning electron microscope (SEM).
采用光学显微镜、扫描电镜研究了沉积高速钢孔隙的大小、形状、分布及显微结构。
An optical microscope and a scanning electron microscope (SEM) were employed to examine the change of the crack and the microstructure before and after the healing treatment.
在光学显微镜和扫描电镜下观察了处理前后钢样品中裂纹和组织的变化。
The wear surface morphologies were surveyed by scanning electron microscope (SEM) and wear mechanism was analyzed under the sand slurry wear condition.
运用扫描电镜观察了这几种材料在泥沙磨损条件下的磨损表面形貌，分析了它们的磨损机理。
The porous structure of wood samples on their cross sections was observed using the scanning electron microscope (SEM) images and analyzed via the fractal theory.
通过扫描电镜图片对木材试样横纹剖面的多孔结构特征进行了观察，并利用分形理论对其进行了分析。
The fracture of Piston rod of the absorber was analyzed by means of chemical composition analysis, microstructure examination and the scanning electron microscope (SEM).
采用化学分析、金相分析以及扫描电镜分析等试验方法对某减震器连杆断口进行了分析。
At last, the accuracy and reliability of above-mentioned conclusion is validated by the concrete experiment and scanning electron microscope (SEM).
最后通过混凝土实验与扫描电镜分析进一步验证了上述结论的准确性与可靠性。
The o-LiMnO2 powder materials prepared in different temperatures were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).
用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。
The o-LiMnO2 powder materials prepared in different temperatures were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM).
用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。
应用推荐