Confocal scanning optical microscopy (CSOM) includes transmission type and reflection type as well as coherent incident light type and incoherent fluorescent light type.
共焦扫描光学显微(CSOM)系统有透射式和反射式、相干光和非相干光荧光等类型。
Confocal scanning optical microscopy (CSOM) is a high precision microscopical image system which based on the confocal principle, scanning technology and image processing.
共焦扫描显微成像系统(C SO M)是以共焦原理为基础，集扫描技术和数字图像处理技术为一体的高精度的成像系统。
Near Field Optical Microscope (NFOM) is a kind of scanning probe microscopy with high resolution.
近场光显微镜(NFOM)是一种高分辩率的扫描探针显微镜。
Objective to develop a method for the optical section of laser scanning confocal microscopy of amnion and to study the spatial structure of cell and actin cytoskeleton in amnion of human embryo.
目的建立羊膜组织共聚焦激光扫描显微镜光学切片的方法，探讨早期人胚羊膜细胞结构、分层及细胞骨架的空间结构。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
In this paper, scanning tunneling microscopy (STM) is used to investigate the microstructure of organic films in optical recording.
运用扫描隧道显微镜(STM)观察了光记录有机薄膜的微观结构。
Near-field optical microscopy, based on scanning sample surfaces by the tip of optical probe, obtained the imagined information about the object surface.
近场光学显微镜是利用探针的扫描来获得样品表面信息的。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
Scanning near-field optical microscopy (SNOM) is a novel tool for the research down to nanometer scale.
扫描近场光学显微镜(SNOM)是一种能探测纳米尺寸的新型显微工具。
The thermal properties and crystallization behaviors were studied by means of differential scanning calorimetry (DSC), thermogravimetry (TG) and polarizing optical microscopy (POM), respectively.
用示差热分析（DSC），热重分析（TG）和偏光显微镜（POM）研究了材料的热性能和结晶行为。
The structural and optical characteristics were studied by X-ray diffraction, scanning electron microscopy and Photoluminescence spectrum.
利用X射线衍射仪、扫描电子显微镜和荧光分光光度计对样品的晶体结构和光学性质进行了分析。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
采用力学、物理性能测试，金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
Experimental techniques such as optical microscopy and scanning electron microscopy were used to study fracture of press eccentric gear main shaft.
采用扫描电镜及光学显微镜对压力机偏心齿轮主轴断口进行了系统的分析。
The structure, surface morphology and the optical properties were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL).
用X 射线衍射（XRD）、扫描电镜（SEM）、荧光光谱（PL）对样品进行结构、形貌和发光特性的分析。
In this paper, optical microscopy (OM), scanning electron microscopy (SEM) and scanning tunneling microscopy (STM) are used to investigate the microstructure of recorded organic thin film.
通过光学显微镜(OM)，扫描电镜(SEM)和扫描隧道显微镜(STM)观察了光记录有机薄膜的微区结构。
The defective cast blades blanks of K6 alloy are examined by means of optical, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spetrum (EDS).
应用金相显微镜和扫描电镜以及X射线能谱分析了K6合金铸造叶片的质量问题。
By means of optical microscopy, microhardness testing, X-ray diffractometry (XRD) and scanning electron microscopy (SEM), the oxygen-diffusion zone was characterized in the present paper.
通过金相观察、显微硬度测试、x射线衍射(XRD)及扫描电镜(SEM)分析，研究了渗氧层的结构和性能。
By means of optical-microscopy, scanning election microscopy (SEM), and election diffraction spectrometer (EDS) etc., the crack of gear was analyzed, the reason of the failure is found.
采用光学显微镜、扫描电子显微镜和电子能谱仪等方法对开裂齿轮进行了分析。
The surface defect on medium and heavy plate Q235B was investigated by means of the optical microscopy, scanning electron microscopy and energy spectrum analysis in this paper.
对Q 235 B中厚板表面缺陷处的显微组织、非金属夹杂物等进行了金相组织和扫描电镜观察及能谱分析。
The crack morphology of hardfacing metal was investigated by means of optical and scanning electron microscopy. The effect of re oxide on cracking resistance of hardfacing metal was studied.
采用金相和电镜等手段对堆焊裂纹形貌进行了观察，并研究了稀土氧化物对堆焊金属抗开裂性能及塑、韧性的影响。
The effects of rare earth Y on the microstructure and properties of low carbon micro-alloyed steel were studied by optical microscope, scanning electron microscopy and spectroscopy.
利用光学显微镜和扫描电镜以及能谱分析，研究了稀土元素钇对低碳微合金钢组织、性能的影响规律。
The structural color and microstructure of nacre in bivalve shells of Pinctada maxima were investigated by optical reflection spectra, scanning electron microscopy and theoretical simulation.
采用反射光谱、扫描电镜及理论模拟计算对大珠母贝珍珠层的结构色及微结构进行了系统的研究。
This article describes the technique of Scanning Near-field Optical Microscopy and reviews the recent progress in the application of biology.
本文对SNOM的技术方法及其近期的的生物学应用进行了介绍。
This article describes the technique of Scanning Near-field Optical Microscopy and reviews the recent progress in the application of biology.
本文对SNOM的技术方法及其近期的的生物学应用进行了介绍。
应用推荐