Moreover each serial communication interface supports different communication format, rate and protocol.
支持不同通讯格式、不同通讯速率和不同通讯协议。
This paper introduces the serial communication interface(SCI) module and the interface circuit of TMS320LF2407A.
简要介绍了数字信号处理器TMS320LF2407A的串行通信接口模块及其串行通信接口电路。
The serial communication interface chip design was realized by application of schematic diagram and VHDL language.
采用自顶向下的设计方法，用原理图和VHDL语言这两种输入对串行通信接口芯片进行设计。
Data show USES LCD module in order to save battery power and the interface of display and microcontroller is serial communication interface.
数据显示部分用液晶显示模块以节省电池的耗电量，显示器与单片机的接口为串行通信接口。
Singlechip was used in CAN bus and serial communication interface, whose valid transition speed is very low and can't satisfy rigorous demands.
当前CAN总线与串口通信接口转换均采用单片机，有效转换速率很低，不能满足条件苛刻的场合；
The POF's diameter is measured by using laser diameter gauge and the data of the diameter is sent through its RS232 serial communication interface.
以激光测径仪为测量手段，通过其RS232串行通信接口发送数据。
The serial communication interface has many merits such as simple design hardware, more convenient control, lower cost, far transmit distance and etc.
串行通信接口技术以其硬件设计简单、控制方便、成本低廉、传输距离远等优点在工程中广泛使用。
The function of serial communication port in protocol tester was analyzed and a programmable multi-protocol serial communication interface circuit was designed.
分析了网络协议测试仪的串行通信接口功能，设计了一种可编程多协议串行接口电路。
The master communicates with the relay unit by serial communication interface and the relay unit communicates with module unit by wireless communication network.
上位机和中继单元之间采用串行口通信，中继单元和模块单元之间采用无线网路进行通信。
This paper introduces the application of a virtual instrument based on serial communication interface on medical device aiming for monitoring the fetus heart electric signal.
本文介绍了一个基于串行通信接口的虚拟仪器在医疗仪器方面的应用，本系统主要用于胎儿心电信号监测。
In order to control and acquire temperature data automatically, Serial Communication Interface Technology was adopted to link intelligent temperature control instrument with PC.
应用串行通讯接口技术把智能温度控制仪表和微机连接，实现了温度自动控制和采集的自动化。
This article introduces serial communication interface module(SCI)of TMS320F240. It also combines with an example of motor control system to explain practical application of SCI module.
介绍了TMS320F240串行通信接口模块的特点及构成，并结合一个电机控制系统对串行通信接口的实际应用进行了说明。
In apparatus having a standard serial communication RS-232C interface, can be realized with the computer or computer communication.
仪器具有标准串行通讯RS- 232c接口，可实现与电脑或计算机的通讯。
The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
微机和下位机的通讯采用RS232串行接口，适用于远距离通讯。
The Serial peripheral Interface is a sort of technology with high speed and efficiency, which makes the SPI device convenient in data communication.
SPI接口技术是一种高速，高效的串行接口技术，因而SPI设备在数据通信中应用十分方便。
Also, it provides the application of serial communication controller (SCC) which realizes the interface circuit linking AM79101 and 51mcu, and its programs.
同时给出了应用双通道串行通信控制器(SCC)实现AM 79101与51单片机接口电路和应用程序设计。
It is helpful to the designer of serial interface communication program of the real time clock device.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
Transmitting and receiving circuits and serial communication and control interface between PC and microcontroller are described in detail.
详细介绍了光发送、光接收电路和单片机与微机的串行通信控制接口。
Serial data communication has gained wide application in network transmission, backplane transceiver and I/O interface.
串行数据通信在网络传输、背板连接和I/O接口等领域应用非常广泛。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
This paper presents the design of extended interface in serial communication with 8n-bit binary number.
本文给出了8n位二进制数串行通讯扩展接口板的设计。
The SDI-12 communication standard, a kind of serial data communication interface protocol, is widely used in environment monitoring in Euro-American countries.
本文推荐的SDI— 12通讯标准是近五年来欧美国家在环境监测中广泛使用的一种串行数据通讯接口协议。
This research works out a design of signal adaptor circuit of serial communication port between PLC and PC, including input interface circuit and output interface circuit.
设计了PLC与PC机串行通讯口之间信号适配器硬件电路，包括输入接口电路、输出接口电路。
Serial asynchronous communication can be realized through universal I/O interface. The simple connection and considerate programming aim at various SCM application systems.
提出了一种利用通用I/O口实现串行异步通讯的方法，该方法接口简单，程序实现方便，特别适合各种单片机应用系统。
The serial communication controller-85C30 is introduced firstly. The design of 85c30 interface circuit can be found in this part.
首先介绍了串行通信控制器85c30，给出了85c30接口电路的设计。
The paper introduces an approach of serial communication of PIC16F877 single chip computers with PC and provides a hardware interface circuit and a communication source program.
介绍了PIC16F877单片机与PC机实现串行通信的一种方法，并给出了硬件接口电路及通信源程序。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
Combining the interface design of CCD Camera System, the application of serial communication is introduced.
结合CCD相机系统的接口设计，介绍了串口通讯的应用方案。
And it USES asynchronous serial communication technology based on RS-485 electric interface as communication means. The process of sending data frames are analyzed and communication protocol was made.
并且使用了广泛应用的RS- 485电气接口的串行通讯技术作为通讯方式，文中分析了发送数据桢的过程，并制定了通讯协议。
And it USES asynchronous serial communication technology based on RS-485 electric interface as communication means. The process of sending data frames are analyzed and communication protocol was made.
并且使用了广泛应用的RS- 485电气接口的串行通讯技术作为通讯方式，文中分析了发送数据桢的过程，并制定了通讯协议。
应用推荐