Synthesis of magnesium aluminium spinel and fused two main methods are sintering method.
合成铝镁尖晶石的两个主要方法是烧结法和电熔法。
A new composite sintered coating on artificial roots of tooth made of titanium alloy was made by a two step sintering method.
采用两步烧结法制备了新型的钛合金牙根种植体表面复合涂层。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
Therma fatigue behaviors of Ni base alloy-chromium carbide composite coating made by a vacuum fusion sintering method are discussed in this paper.
研究了用真空熔烧法制得的镍基合金-碳化铬复合涂层的热疲劳行为。
The gradient ceramic-metal composites was prepared by the hot-press sintering method, and the static and dynamic mechanical performance were tested.
利用热压烧结法制备了梯度型陶瓷—金属复合材料，并对其静态压缩性能和动态冲击压缩性能进行了测试。
The influence of alloy contents, sintering method and process parameters on the formation of surface layer deficient in cubic carbide has been studied.
研究了合金成分、烧结方式、工艺参数等对表层缺立方相碳化物形成过程的影响。
The chemical compositions of a bauxite tailing were analyzed. A glass-ceramics was prepared using the bauxite tailing as main raw material by sintering method.
分析了铝土矿尾矿的化学组成，并以铝土矿尾矿为主要原料利用烧结法制备出了微晶玻璃。
Hydroxyapatite ceramic powder was synthesized by chemical coprecipitation process. The. maxillofacial bone materials were made by slip-casting. HP and HIP post-sintering method.
采用化学共沉淀法合成羟基磷灰石粉料，采用注浆成型、热压烧结及热等级压后烧结等工艺制备羟基磷灰石颌面骨材料。
Methods including alkali sintering method, acid leaching method and so on of extracting alumina from fly ash and research progress thereof at home and abroad have been expounded.
对国内外采用粉煤灰提取氧化铝的工艺方法及研究进展进行了阐述，包括碱法烧结和酸浸法等工艺。
The results show that the content of tetragonal phase is increasing in BNBT ceramics by direct reaction sintering method but still exhibiting a single phase of perovskite structure.
结果表明，直接反应烧结法不影响BNBT陶瓷的钙钛矿相结构，但可使准同型相界处组成的四方相含量增加；
We have succeeded in making a kind of phase change material (PCM) of high thermal storage density, good corrosion-resistant performance and low cost of preparation by powder sintering method.
本研究采用粉末烧结工艺将陶土分别同性能优良的高温熔融盐复合，成功地制备出蓄热密度高、耐腐蚀性好且成本低廉的相变蓄热复合材料。
The article makes an introduction of new sintering process with wet method of coal rear-feeding in raw mix and it also verifies the feasibility.
本文介绍了一种生料煤湿法后加的烧结法生料掺煤新工艺，并对其可行性进行了研究论证。
This research is to aim at the characteristic of red alkaline mud dump site of the sintering process, and to find a feasible method for ecological rehabilitation on the slope.
针对烧结法的强碱性赤泥堆场的特性，找出一种可行的施工方法，对边坡进行复垦植被。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
To solve the problem of large deforming and poor accuracy of SLS product , the method of the artificial neural network is applied in the study of selective laser sintering (SLS) process.
针对选择性激光烧结成型件变形大、精度较低的问题，将神经网络方法应用于选择性激光烧结（SLS）加工工艺的研究。
Predicted models of rising position of gas temperature, burn through point, vertical sintering speed, and so on, are established using dada analysis method.
采用数据分析的方法建立了废气温度上升点、烧结终点、垂直烧结速度等参数的预报模型；
Production Process: Ptfe rod is made by ptfe resin , using the method of pushing and then sintering.
生产工艺：聚四氟乙烯推压棒由聚四氟乙烯树脂在常温下用推压法成型，再经烧结制成的。
A series of physical and chemical reactions will take place during the process of sintering when diamond tools are manufactured with soaking method without pressure.
用无压浸渍法制造金刚石工具，在烧结过程中要发生一系列物理、化学变化。
Laser is used to sinter the Selective laser sintering (SLS) parts. The scanning system needs to do plenty of scan, so scan method is very important to SLS process.
选择性激光烧结(SLS)技术使用激光束进行截面区域烧结，扫描系统需要作大量的扫描，所以扫描路径的选择就显得尤为重要。
This paper describes the method and device for the explosive sintering and discusses the mechanism of the sintering process and main parameters distributing to the process.
论述了爆炸烧结的方法及装置，讨论了烧结过程的机理及影响其过程的主要参数。
Hexagonal nitride boron is laminate structure ceramic materials. Solving the sintering densification problem is the main method to improve the ceramic performance.
六方氮化硼是一种片状结构材料，解决其烧结致密化问题是提高陶瓷性能的主要途径。
To solve the optimization-model of sintering burdening problem, firstly get the mathematic model from the physical model, and then the method using to solve the model was talked about.
针对烧结配料的优化问题，由物理模型得出数学模型，探讨了数学模型的求解方法。
By the method of mixed sintering, the composite ceramics consisting of two phases with PZN-based and PMN-based respectively were successfully prepared.
以PZN基和PMN基粉体为起始组元，采用两相混合烧结法成功地制备了两相共存的复相陶瓷。
The application of heat pipe in heat recovery of sintering process is introduced and the calculating method in the saving-energy and the economy are suggested by calculating and analyzing.
本文对热管技术在冶金烧结机上的节能应用进行了介绍，提出了其节能性和经济性的计算方法，通过计算和分析，得出了热管蒸发器在冶金烧结机上应用是节能经济可行的结论。
The paper discusses the influence of remove hot screen in sintering process, and gives the method to adjust corresponding process.
分析了烧结取消热矿筛工艺的生产影响，并提出了相关工艺调整措施。
Permanent ferrite samples were prepared from YF28 pre-sintering materials doped with different additives with an industrial craft method and their magnetic properties were investigated.
以锶永磁铁氧体yf28的预烧料为原料，采用工业生产工艺，分别制备不同添加剂的锶永磁铁氧体，并对其性能进行研究。
As a new method of ceramic material sintering, microwave sintering has been improved rapidly in recent years.
微波烧结作为一种陶瓷材料烧结的新方法，近年来得到飞速发展。
A method for making monophasic solid solution of copper and manganese by powder metallurgy process is presented. The sintering characters of green compact of copper and manganese powder are studied.
提出了用粉末冶金法制备铜锰固溶体的方法，研究了铜锰粉末压坯的烧结特性。
The preparation method of the guide tile comprises the steps of material mixing, molding, sintering, shaping, carburizing heat treatment, etc.
上述汽车空调用导向瓦的制备方法包含：混合粉料、模压、烧结、整形与渗碳热处理等步骤。
The preparation method of the guide tile comprises the steps of material mixing, molding, sintering, shaping, carburizing heat treatment, etc.
上述汽车空调用导向瓦的制备方法包含：混合粉料、模压、烧结、整形与渗碳热处理等步骤。
应用推荐