For example, he was the drummer of a speed metal band in college.
比如说，他是大学里Speed金属乐队的鼓手。
You can find interesting things from speed metal at the turn of the 90's, too.
你还可以在90年代之初的速度金属找到一些有趣的配饰。
The two process determines the speed of the metal crystalline degree of degree.
这两个过程的速度决定着金属结晶的粗细程度。
The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.
选择正确的切削速度对所有金属的切削操作有着重要的经济上的影响。
The selection of the correct cutting speed has an important bearing on the economics of all metal cutting operations.
正确的选择切削速度对所有金属的切割操作成本都有有很大的影响。
Sedimentary speed: unit time parts deposition on the surface of the metal thickness.
沉积速度：单位时间内零件表面沉积出金属的厚度。
The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
With high frequency, it is suitable for some metal material marking in high speed.
激光频率高，更适合一些金属材料的打标，打标速度更快。
The M4 Sherman proved their metal based upon their reliability, speed, ease of maintenance, and overall adaptability.
M4谢尔曼证明了他们的金属基于他们的可信度，速度，维护的安逸和全部的适应性。
By using metal mold casting, we can control mold temperature, infusing temperature, infusing speed to avoid defects of pore, cold partition, shrink and loose.
采用金属型立式浇铸，严格控制铸造工艺参数(模具温度、浇注温度、浇注速度)，以避免气孔、缩松、冷隔等缺陷的产生。
Features: dissolving speed, no corrosion to metal, harmless to the human body.
特点：溶解速度快，对金属无腐蚀，对人体无害。
Product Description: coating for metal sheet, white, varnished, the effect of smoothing. Combined with scraper after the oil thin and uniform coating can round Speed Control oil.
用于金属板材涂布底油，白底，光油，效果平滑加上刮刀油量薄且均匀，涂布轮可调速控制油量。
The crimped head design, prevents solids from dislodging the seal face, allows the seal to withstand higher pressure and rotational speed and eliminates the metal shell from contacting the seal ring.
波纹式头部设计，防止固体颗粒从密封面上撞出，使得密封能够抵抗更高的压力和旋转速度，避免金属壳接触到密封环。
Flo discusses the basic elements fundamental in playing extreme metal drums as well as showing exercises, routines and tips facilitating speed, endurance and control.
弗洛讨论了根本的基本要素中发挥极端金属桶，以及展示演习，套路和技巧便利的速度，耐力和控制。
Compared with metal pipe clean health products need further sound insulation is it reduce high-speed noise decibel that rivers produce count relatively to come.
与金属管相比，凯佳产品不需进一步隔音来降低相对高速水流所产生的噪音分贝数。
The cast ingots prepared using sand mould and metal mould were analyzed to investigate the effect of cooling rates on morphologies and characters of M2C eutectic carbides in M2 high speed steel.
采用砂型和金属型铸造制备m 2高速钢铸锭，研究了冷却速度变化对高速钢m 2c共晶碳化物形态及性质的影响，探讨了M2C共晶碳化物形态变化的机理。
An algorithm to improve the fuel economy of a metal belt continuously variable transmission (CVT) vehicle by CVT shift speed control is suggested in the paper.
推荐采用CVT换档速度控制的一种算法来改进金属推块无级变速器车辆的燃油经济性。
This article provides a method to test corrosion speed of metal by resistance.
提供一种采用电阻法对金属的腐蚀速度进行检测的方法。
In this paper various metal transfer modes in the pulse MIG welding with steel electrode are studied by means of high speed cine camera and oscillograph.
本文利用高速摄影机和示波器研究了钢焊丝熔化极脉冲焊的各种熔滴过渡形式，试验是在平焊和仰焊位置进行的。
The Machine consists of up-down stamped screen box, vibrator and shock absorber, 4-speed vibration-reducing metal spring connects body to base in symmetrical position.
本机由机体上下冲孔筛箱、振动源、机座及减震器三组部件构成，机体与机座连接由4档减震器金属弹簧对称定位。
The influences of plunge depth, push angle, profile of tool, rotation speed and welding speed on metal flowing were studied.
从压入量、倾角、搅拌工具的外形、焊接速度、旋转速度和材料所处位置等方面研究了工艺参数对金属塑性流动的影响。
While the term technical death metal is sometimes used to describe bands that focus on speed and extremity as well as complexity, the line between progressive and technical death metal is thin.
但技术死亡金属这一术语有时也用来描述既强调复杂性又关注速度和极端性的乐队，前卫和技术死亡金属之间的界线并不清晰。
They are known for the lightning speed of their assaults, injecting fear into the hearts of their enemies and leaving the battlefield strewn with glowing metal wreckage.
他们深知闪电战可以给敌人的心理以巨大的威慑力，使他们迅速溃败，留下的将只会是炙热的金属残骸。
Many factors which may affect the catalytic behavior such as rare earth metal species, calcination temperature, reaction temperature, space speed and feed gas purity were studied.
并研究了不同稀土金属，不同焙烧温度，不同反应温度，不同空速条件及不同来源氢气等因素对催化性能的影响。
The deformated patterns of microstructures during metal cutting were analyzed by means of high speed microphotography.
运用显微高速摄影技术分析了切削过程中金属显微组织塑性变形规律。
Applying classical wave theory, a concept of equivalent elastic modulus on propagation speed modification of guided wave through "variable cross-section" of metal bar embeded layer was put forward.
运用波动的经典理论，提出了导波在金属杆嵌入层“变截面”传播时波速改变的“等效弹性模量”的概念。
The system allows metal tube, bar and wire to pass through the eddy current probe with variable high speed, and defects can be accurately located, marked and recorded.
该系统的特点是允许被测样品高速、变速通过涡流传感器，并能对缺陷进行准确定位、打标及记录。
The upsetting test of metal powder sintered preform by blow speed of the hydraulic press, crank press, pneumatic hammer and high energy rate forging hammer was reported.
研究了用液压机、曲柄压力机、空气锤及高速锤的打击速度对粉末冶金烧结体进行的镦粗试验。
Automatic feeder of metal powder is researched and put into production, not only increase the productive efficiency but also increase the speed of feeding powder.
为了使该工艺用于工业生产，还研制了金属粉末自动装料机，提高了生产效率和装粉质量。
Automatic feeder of metal powder is researched and put into production, not only increase the productive efficiency but also increase the speed of feeding powder.
为了使该工艺用于工业生产，还研制了金属粉末自动装料机，提高了生产效率和装粉质量。
应用推荐