Some main processing parameters are briefly introduced, such as speed of main shaft, feed rate, shape of spinning wheel, deformation rate of each step and structure of template.
对主要工艺参数如主轴转速、进给率、旋轮形状、道次变形率、模板形式等作了简要介绍。
The speed reducer upper on the main machine makes central axis rotate through shaft coupling and roller hanger rotates with central axis and rollers on the hanger roll around the inside of ring.
安装在主机顶部的减速机，通过联轴器连接中心轴旋转，中心轴带动磨辊吊架旋转，磨辊装在吊架上沿磨环内周一起滚动。
Safety brakes have been used at low speed shaft of ladle cranes, especially of those with planet gear boxes. Safety brakes protect the main hoist effectively.
铸造起重机(特别是采用行星减速机者)在卷筒端低速轴上安装安全制动器，对起升机构起到有效的安全保护作用。
The main shaft drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样，普通织机应具备两根轴，主轴驱动筘座并通过齿轮驱动另一根轴。
The aviation main shaft bearing usually works under the condition of high speed and high temperature.
发动机主轴轴承常常在高速条件和高温环境下工作。
The main shaft seal of pump turbines with large capacity at high rotational speed is more liable to failure as compared with that of conventional pump turbines.
大容量、高转速水泵水轮机主轴密封相对常规水轮机主轴密封更容易发生故障。
The main shaft between the air compressor and the gas turbine in a jet aircraft engine is hollow to permit an internal speed reduction shaft with the minimum requirement of space and weight.
在喷气式飞机发动机内位于空气压缩和燃气涡轮之间的主轴是空心的，允许有一个需要最小空间和重量的内部减速轴。
Thus a normal loom has two shafts. The main shaft drives the lay mechanism and is geared to another shaft which operates at half of the speed of the crankshaft.
这样，普通织机应具备两根轴，主轴驱动筘座，并通过齿轮驱动另一根轴。
Main propertiesSeries of HGP roller screen is a kind of equipment which has materiel move forward by using of multi-shaft rotating with same speed and direction.
HGP系列滚轴筛是利用多轴同向等速旋转推移物料前移，并同时进行筛分作业的一种机械设备。
As one of the key parts of the aeroengine main-shaft, the dynamic performance of high-speed cylindrical roller bearing directly affects the dynamic characteristic and reliability of the mainframe.
高速圆柱滚子轴承是航空发动机的关键零部件之一，其动态特性直接影响着主机的性能和可靠性。
Adopt excitation governor and adjust the speed of the main shaft according to different materials. The main shaft can be made into single-shaft configuration or double-shaft configuration.
采用励磁调速，针对不同物料调节主轴转速，根据产量大小主轴可做单轴或双轴结构。
Temperature rise and distribution status of high-speed rolling bearings are directly effect on the performance and life of the main shaft bearings' system.
高速滚动轴承的温升及温度分布状态直接影响着主轴？轴承系统的工作性能和使用寿命。
The front end of the speed reduction crankshaft (1) and the tail end of the main shaft (3) are made by adopting the polygon structure and are same as the inner structures of the grooves (5) and (6).
减速机轴(1)前端与主轴(3)的末端均采用多边形结构构成，并且与凹槽(5)及凹槽(6)的内部构造相同。
The power input shaft of the main speed reducer is provided with an optoelectronic pulser;
在主减速器动力输入轴上设装光电脉冲器；
The power input shaft of the main speed reducer is provided with an optoelectronic pulser;
在主减速器动力输入轴上设装光电脉冲器；
应用推荐