The results show that the cracking of the pipe is a kind of stress corrosion cracking.
分析结果表明,高压油管的开裂是应力腐蚀开裂造成的。
The role of hydrogen embrittlement in stress corrosion cracking has also been discussed.
文中还对氢脆在应力腐蚀开裂中的作用进行了讨论。
The results show that evaporator failure was a result of typical stress corrosion cracking.
结果表明,该蒸发釜的失效为典型的应力腐蚀破坏。
The stress corrosion cracking of metastable austenitic stainless steel has been investigated.
研究了亚稳态奥氏体不锈钢的应力腐蚀开裂。
The results show that the fibre orientation affects on the stress corrosion cracking of GRP seriously.
结果表明,纤维取向对玻璃纤维增强塑料的应力腐蚀行为有很大影响。
The stress corrosion cracking (SCC) behaviour of low alloy steel in nitrate aqueous solution was investigated.
研究了低合金钢-硝酸盐溶液体系的应力腐蚀行为。
It was concluded that the cl ion in the oil glue resulted in stress corrosion cracking of the pure copper tube.
结果表明,紫铜管渗漏系腐蚀引发裂纹所致,而涂在铜管表面的油胶中的氯离子是引起紫铜管应力腐蚀开裂的主要因素。
High environment humidity increases the susceptibility to hydrogen induced cracking and stress corrosion cracking.
高湿度能增大氢致裂纹和应力腐蚀开裂倾向。
Accidents of liquid ammonia equipment used in petrochemical industry happen mostly due to stress corrosion cracking.
石油化工用液氨设备事故多数源自液氨应力腐蚀开裂。
The results showed that it was chlorine ion that resulted in transgranular stress corrosion cracking in brass tubes.
结果表明,黄铜管的开裂为氯离子引起的穿晶应力腐蚀开裂;
Through-thickness cracking also can lead to fatigue or stress corrosion cracking of the base metal beneath the plating.
还会形成穿透型裂纹,造成镀层下本体金属的疲劳或应力腐蚀裂纹。
The effect of different deformation-aging treatments on the stress corrosion cracking of LY12 aluminum alloy was studied.
本文研究了不同的形变时效处理对LY 12铝合金应力腐蚀开裂性能的影响。
The results show that the early failure of the cooling pipe was caused by the stress corrosion cracking in the components.
结果表明,冷却水管发生早期失效是由于构件发生应力腐蚀开裂所致。
The presence of the greater residual tensile stress induces the stress corrosion cracking in the course of the acid pickling.
其原因是磁屏表面存在较大的切向拉应力,从而在酸洗过程中产生了应力腐蚀开裂。
The corrosion behavior of 2d12 alloy was evaluated including intergranular corrosion, exfoliation and stress corrosion cracking.
对不同规格2d 12铝合金进行晶间腐蚀、剥蚀和应力腐蚀性能测定。
The discrepancies of stress corrosion cracking susceptibility between different types of steel, base matal and welds are analyzed.
材料因素方面主要分析了三种不同种类的钢以及同一钢种母材和焊缝的应力腐蚀敏感性的差异。
Pitting corrosion and crevice corrosion in catalyst deposit zone and corrosion deposit zone can also induce stress corrosion cracking.
催化剂沉积区和腐蚀产物沉积区产生的点蚀和缝隙腐蚀会诱发应力腐蚀开裂的产生。
So far, high-strength aluminum alloy has fairly high strength, but its stress corrosion cracking resistance needs to be further enhanced.
迄今,该系高强铝合金的强度已大幅提高,但抗应力腐蚀开裂性能有待改进。
The results show that the early failure of the corrugation expansion joint was results from the stress corrosion cracking in the components.
结果表明,波纹膨胀节发生早期失效是由于构件发生应力腐蚀开裂所致。
Commonly used as stem material in pressure-rated valves, silicon bronze has greater resistance to stress corrosion cracking than common brasses.
通常用作额定压力阀门的阀杆材料的硅青铜比普通黄铜具有更好的抗应力腐蚀裂纹的性能。
It has been proved that these cracks are caused by sulfide stress corrosion cracking (SSCC) through failure analysis and service environment survey.
通过失效分析和管道服役环境调查,证明开裂原因是管道服役期间发生硫化物应力腐蚀开裂(SSCC)。
This favourable distributions of residual stresses after hydrobulging can improve the anti stress corrosion cracking ability of the spherical vessels.
胀形后残余应力的这种有利分布,提高了球罐的抗应力腐蚀性能。
This alloy retards stress corrosion cracking and has improved resistance to sulfuric acid. Alloy 20 finds wide use in all phases of chemical processing.
这种合金能够缓解金属超应力引起的腐蚀所造成的断裂,其抗硫酸腐蚀的性能也有很大的改善。合金20在化工生产过程中具有广泛的应用。
The mechanism and general influence factors of sulfide stress corrosion cracking (SSCC) of chemical equipment made of high strength steel are summarized.
系统的综述了高强钢化工设备硫化物应力腐蚀开裂机理及常规的影响因素。
Advances in life prediction technology for structures suffering localized corrosion such as pitting and stress corrosion cracking are surveyed and discussed.
综述了局部腐蚀如应力腐蚀破裂及点腐蚀作用下设备寿命预测技术的进展。
By stepwise regression analysis of test results, the notabilities of effect on stress corrosion cracking susceptive indexes of medium parameters are revealed.
通过试验数据的逐步回归分析,进一步揭示试验介质参数对应力腐蚀敏感性指数影响的显著性。
By stepwise regression analysis of test results, the notabilities of effect on stress corrosion cracking susceptive indexes of medium parameters are revealed.
通过试验数据的逐步回归分析,进一步揭示试验介质参数对应力腐蚀敏感性指数影响的显著性。
应用推荐