Based on the above mentioned points, attapulgite can be exploited to the protective coating with anti-oxidation at high-temperature of steel.
这一系列优良的特点表明凹凸棒土可以用来开发成为钢铁高温防氧化涂料。
The temperature of steel wire affects the quality of the copper clad steel contact wire when it is produced with new craft of continuous extrusion.
在采用连续挤压包覆技术生产铜包钢接触线时，钢丝的预热温度对产品的质量有重要的影响。
The battery is encased in stainless steel and is reported to have to maintain a temperature of 500 degrees to keep the metals inside in liquid form.
由于密度不同，因此几种液态金属材料彼此之间并不会混合在一起，而会像油水那样出现分层结构。电池被装在一个不锈钢罐中，保持500度高温以便金属处于液化状态。
The results indicate that HAZ produced during welding of grade X80 steel is made up of grads structure under different temperature.
结果表明，X80级管线钢在焊接过程中形成的热影响区由不同温度下形成的梯度组织组成。
FERRITE: a room temperature structure of steel formed when slow cooled from above the critical temperature. Low in carbon and relatively soft.
铁素体：从高于临界点的温度缓慢冷却下来时形成的一种钢铁常温组织结构。
Application status of a new homemade coating for steel billet in high temperature dynamic process was introduced.
介绍了一种自主开发的动态过程钢坯高温防氧化涂料的应用状况。
To reheat hardened steel or hardened cast iron to some temperature below the eutectoid temperature for the purpose of decreasing hardness and increasing toughness.
重新加热硬化钢或硬化铸铁至某一温度，低于共析温度下，使硬度降低，韧度增加。
The secondary recrystallization and its temperature range of grain oriented silicon steel have been studied by the method of interrupting secondary recrystallization annealing.
采用＂中断法＂研究了取向硅钢二次再结晶过程中的异常长大行为，确定了二次再结晶发生的温度范围。
Can real-time monitoring, according to the steel plate and steel temperature, temperature automatic cutting for compensation to make steel plate after cooling the size of the order to meet users.
可以实时监测钢板温度，并根据钢板温度自动进行切割补偿以使钢板冷却后的尺寸满足用户订货要求。
Introduce a design instance of pressure vessel with nonuniform temperature distribution. The design meets the rules in Item 3.5.2 of GB150-1998 "pressure vessel in Steel".
文章介绍了一例各部分金属温度不同的压力容器的设计，其设计思想符合GB150- 1998《钢制压力容器》中第3.5.2条的规定。
Relaxation losses are very sensitive to the temperature of the steel.
松弛损失对钢筋的温度很敏感。
The presence of fingerprints, halocarbon oils, and machine oils have been shown to significantly reduce the temperature resistance of metals, including stainless steel and nickel.
已经证明，手印、卤烃油和机油的存在会大大降低包括不锈钢和镍在内的金属的抗温度能力。
The tensile strength, elongation and hardness of T10 steel subjected to magnetic field quenching and to high temperature tempering were separately increased by 28%, by 8.
与经普通淬火和高温回火的相比，经磁场淬火和高温回火的T10钢的抗拉强度提高了28%，断后伸长率提高了8。
These displacement transducers are ruggedly constructed of stainless steel and able to withstand harsh environments where high ambient temperature or vibration is present.
这些位移传感器是由粗糙的不锈钢构造而成，且能够承受高温或振动等恶劣的环境。
Raise work efficiency of 80%. High temperature resistance. All stainless steel Solder joints are light treated, beautiful appearance.
提升工作效率80%。可耐高温。不锈钢所有焊点均做亮光处理，美观漂亮。
Used in AC rated voltage 450/750V and below a variety of mobile motors, steel, aviation, power plants, petrochemical and other high temperature environment.
使用于交流额定电压450/750V及以下各种移动式电机、钢铁、航空、电厂、石化等高温环境中使用。
The finite element model was established based on the small punch creep test of SS304 steel specimen in the condition of constant temperature and different loads.
对304不锈钢进行了恒定温度下多种载荷的小冲孔蠕变试验，在此基础上建立了304不锈钢小冲孔蠕变试样的有限元模型。
Therefore, the steel is mainly used for low temperature impact of the impact of the components, welding structure and other requirements of higher strength components.
因此，镇静钢材主要用于低温下承受冲击的构件、焊接结构及其他要求强度较高的构件。
The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.
退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。
Owing to use of dual synchronous CCD technology and data processing function of PC, effect of temperature to measured length of steel pipe is eliminated.
采用双同步CCD技术，结合上位机的数据处理功能，消除了在测量过程中温度对所测长度的影响。
Temperature changes, temperature diversities and temperature grades are common forms of temperature actions in steel and concrete composite girders.
在钢混凝土结合梁中，温度作用通常包括三种形式，即：变温、温差和温度梯度。
The effects of baking temperature, baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and BH sheet steel produced by batch annealing were studied.
研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。
The low temperature toughness of low temperature steel can be improved effectively by means of adjusting alloy ingredients and modifying heat-treatment regime.
通过调整合金成份和改变热处理制度试验，有效地提高了低温钢的低温韧性。
The low temperature toughness of low temperature steel can be improved effectively by means of adjusting alloy ingredients and modifying heat-treatment regime.
通过调整合金成份和改变热处理制度试验，有效地提高了低温钢的低温韧性。
应用推荐