It is a new application to combine the finite element method analysis technique and the experiment unit of spontaneous combustion together to study and simulate the temperature field.
将有限元分析技术与煤自然发火实验台相结合，对温度场进行模拟研究，目前还属于较新的应用。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
The category and reason for Finite Element Method analysis error are analyzed, and the adaptive mesh method is researched.
同时分析了有限元分析误差产生的种类及原因，并对自适应单元网格优化进行了研究。
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
The theoretical analysis and numerical experiments show that the multiscale finite element method presented in this paper is very effective to solve above these kinds of problems.
理论分析和数值实验均表明：多尺度数值方法对求解多孔复合介质周期结构的热传导和质扩散问题是可行的和有效的。
By comparing the results obtained from the test and finite element analysis, a very good agreement is found, showing the accuracy and feasibility of the simulation with finite element method.
将有限元模拟结果和试验结果进行了比较，取得了较好的一致，验证了有限元分析的正确性和可行性。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
As a numeric analysis method, the finite element method has been becoming a more and more important action in analysis of gear transmission system.
有限元方法作为一个强有力的数值分析工具，在齿轮传动系统的分析中起到了越来越大的作用。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
Researching into the force will provide the detailed and reliable basis for the analysis of finite element method and optimal design of strut member.
研究主轴电极头所受的液体阻力，为主轴支承件的有限元分析和优化设计提供详实可靠的理论依据。
The finite element method of random land subsidence and the reliability analysis of random soil parameter are furthermore researched.
进一步研究了随机地面沉降的有限元解法及随机土参数的可靠性分析。
The natural frequency of the gas column in simple pipelines was solved using the finite element analysis method. The result agreed with that derived with transportation matrix method.
采用有限元分析方法，对简单管道气柱的固有频率进行求解，其结果与用传递矩阵法求得的结果是一致的。
Aiming at the real prototype, we use the finite element method to analysis the effect of disposition of the long bolts and check its reliability.
本论文针对实际样机产品设计，着重运用有限元法对长螺杆的布置及其连接可靠性进行了分析。
Based on analyzing the wall thickness design and stability checking method of drum, the finite element analysis of the crane 'drum is studied.
在分析传统卷筒壁厚设计与稳定性校核方法的基础上，对起重机卷筒进行了有限元分析。
Based on interval analysis and displacement finite element method, the static displacement response analysis of structure comes down to solve the interval finite element control equation.
现有的理论和方法采用区间分析和位移法有限元理论对其进行分析，最终归为位移法区间有限元控制方程的求解。
The frame of a new style motorcycle named Sport Recreation Vehicle (SRV) was researched. Using the finite element mode analysis method, the vibration mode of motorcycle frame was analyzed.
以一新型运动型多功能休闲摩托车车架为研究对象，采用有限元模态分析的方法，对车架振动模态进行了分析。
It is effective to apply the finite element method to transient response analysis for impact problem.
我们认为用有限元方法分析瞬态冲击问题是行之有效的。
Because of good applicability and high precision the finite element analysis method has become the preferred method for numerical magnetic field computation of machines.
由于电磁场有限元分析方法具有通用性好、计算精度高的特点，因此成为目前首选的电机磁场数值计算方法。
Aiming at sheet space structure system, the finite element method in quantitative analysis about contact problem is studied in this thesis.
针对板片空间结构这一结构形式，研究了接触问题定量化分析的有限元方法。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
应用推荐