There are many ways to arrange the grinding process for one roll.
对于同一被修磨的轧辊，修磨工序的安排可以有多种。
There are many ways to arrange the grinding process for one roll.
对于同一轧辊，修磨工序的安排可以有多种。
Mainly study the affect of the frequency of ultrasonic vibration on the grinding process.
主要研究超声振动频率对磨削过程的影响。
The addition of sodium carbonate into the grinding process can realize the selective desliming.
磨矿过程中添加碳酸钠，可实现矿泥的选择性脱除。
These dimensions vary widely, depending upon the grinding process for which the wheel is to be used.
根据采用砂轮的磨削工艺，这些尺寸变化很大。
The average diameter / size of particles supplied as a powder coating, following the grinding process.
研磨的粉末涂料的粒子的平均粒径。
In the grinding process of granite, several kinds of grinding coolants with different types of surfactant were used.
花岗岩研磨过程中添加含不同类型表面活性剂的磨削液。
In this paper, application of self-tuning algorithm implemented by a single-beard computer to the grinding process is studied.
本文探讨了单板机和自校正调节器在磨矿过程控制中的应用问题。
In the grinding process, all states and parameters can be displayed on the screen real time and can directly modify the relevant parameters.
磨削过程中，屏幕实时显示各状态与参数，并可直接修改相关参数。
The results indicate that increasing the vertical pressure or grinding speed is beneficial to the grinding process of ceramic corundum abrasive belt.
试验结果表明，采用较大的法向压力或适当增大磨削速度等磨削参数，可以高效发挥陶瓷刚玉砂带的磨削性能。
In the course of the grinding process, the unbalance of the grinding wheel is the main reason for the vibration of the axis and the low grinding quality.
在磨削加工中，砂轮不平衡量是引起砂轮主轴系统振动、降低磨削质量的主要原因。
The particle size distribution of coal has self similarity during the grinding process and can be fit by the fractal equation of particle size distribution.
在煤的粉碎过程中其粒度分布具有自相似特征，可以用粒度分布的分形模型来拟合煤粉碎过程中的粒度分布特征。
In the grinding process of ceramic material, the surface quality is directly affected by the property of diamond grinding wheel and the grinding parameters.
在陶瓷材料的磨削加工过程中，金刚石砂轮特性和磨削用量直接影响磨削表现质量。
The grinding process could be controlled either by grinding cycle parameters or by signals from gauge, which meets the grinding control requirements very well.
通过循环参数控制和量仪控制两种磨削加工的控制方法，较好地满足了磨削加工的控制要求。
Than the loose organization of the abrasive used is not easy passivation, less heat in the grinding process can reduce the workpiece deformation and heat burns.
较松组织的磨具使用时不易钝化，在磨削过程中发热少，能减少工件的发热变形和烧伤。
Almost any shape of the workpiece can be ground. In the grinding process, the system has powerful features for dressing and compensation with the grinding wheel.
几乎任何形状的工件均可研磨，在研磨过程中系统有超强砂轮修整功能，可在研磨中执行砂轮修整和补偿。
Considering the special requirement of the grinding process of cots, highlight is given to the selection, finishing and application of grinding wheels in practice.
介绍了大气孔砂轮磨粒的特性，针对胶辊磨砺过程的特殊性，重点分析了磨胶辊时砂轮的选择、修整及使用时解决实际问题的办。
The difficulty in NC grinding is that the size of the work piece cannot be invariable because the grinding wheel will be abraded continuously in the grinding process.
数控磨削加工的难点在于，由于砂轮在磨削过程中是不断磨损的，因此使得被磨工件的加工尺寸不能恒定。
This article talks about the grinding process of the roll in several areas, according to the present production condition, the equipment capability and accuracy standards.
本文介绍了根据现有的生产条件，设备的性能、规格和精度等级，对轧辊修磨工序在一定范围内进行了讨论。
A blasting process and a precise grinding process are carried out on the workpiece after the second coarse grinding process, and then the workpiece goes into the grinding process.
在所述的第二次粗磨工序后，对工件进行喷丸工序和精磨工序后再进入研磨工序。
Second, the grinding process Chinas iron ore grinding process, most use two paragraphs of small and medium-sized concentrator, grinding flowsheet is used more for a grinding process.
磨矿工艺我国铁矿磨矿工艺，大多数采用两段磨矿流程，中小型选矿厂多采用一段磨矿流程。
Based on this knowledge, the grinding kinetic equation of coal characterized by particle size is presented. It can reflect the variation of particle size of coal during the grinding process.
在此基础上，建立了以粒度表征的煤粉碎动力学方程，用以反映粒度大小在粉碎过程中的变化特征。
Grinding fluid in the grinding process plays an extremely important role in the proper use of grinding fluid can improve the process stability and improve workpiece quality, extend tool life.
磨削液在磨削加工中扮演着极为重要的角色，正确使用磨削液能提高工艺稳定性、提高工件质量、延长刀具使用寿命。
With the continuous application of ultra-hard high speed steel and other materials hard to be machined in tool industry, higher requirements have been put foward to the grinding process for tools.
随着超硬含铝高速钢及其他难加工材料在工具行业的不断应用，对刀具的磨削加工提出了更高的要求。
Based on the analysis of the regenerative modulation caused by the unbalance of grinding wheel in the grinding process, a new mixed grinding chatter, named regenerative modulating chatter is advanced.
在磨削过程中，由于砂轮不平衡引起再生调制，在此基础上，提出了一种新的混合型颤振再生调制型颤振。
Based on the analysis of the regenerative modulation caused by the unbalance of grinding wheel in the grinding process, a new mixed grinding chatter, named regenerative modulating chatter is advanced.
在磨削过程中，由于砂轮不平衡引起再生调制，在此基础上，提出了一种新的混合型颤振再生调制型颤振。
应用推荐