The intelligent controller for on-load tap-changer is introduced.
介绍了一种智能化有载分接开关控制器。
In the second chapter, we introduce holistic hardware design of the intelligent controller.
第二章对智能控制器的硬件进行总体设计。
The intelligent controller for boiler with the opening system structure is made up of STD as a bus and 80C31 as a core.
提出以STD为总线，以80C31单片机为核心构成开放式系统结构的智能锅炉控制器。
The design of the intelligent controller, the phantom quality and the functions of every part of the system are theorically analyzed.
系统地介绍了智能控制器的设计并给出其系统仿真特性，同时对整机系统各部分功能也作了剖析。
In control algorithm, the intelligent controller which includes fuzzy controller and PID controller was designed in this dissertation.
在控制算法方面，本文设计了智能控制器。
The intelligent controller of water supply based on 51LPC singlechip microcomputer is introduced and so is the design of hardware and software.
介绍了基于5 1 LPC单片机实现的智能供水控制器，详细论述了其软硬件的设计。
The intelligent controller has the communication capable interface and is controlled by computer via fieldbus, therefore it is able to have function of remote me…
智能型控制器带有可通信接口，通过现场总线由计算机控制，实现供电系统的遥测、遥调、遥控和遥信功能。
The intelligent controller can apply to the system with a various charge of objects. Expanding the Performance, the intelligent controller will be used more widely.
智能控制器适用于多种控制系统，通过性能扩展之后，还将得到更广泛的应用。
In this paper, the intelligent controller of spring-washer packing system is introduced. The hardware architecture and the method of solving two key-technologies are given.
本文介绍了弹簧垫圈智能包装控制系统，给出了系统的硬件结构，提出了对两个关键技术问题的解决方法。
Simulation results demonstrate that the control performance, stability, and adaptation of the intelligent controller are better than those of the conventional PID controller.
仿真结果表明：与传统PID控制器相比，该智能控制器的控制性能具有优越性。
Type of fault, phase sequence, value of faulty current and breaking action time will be indicated on the intelligent controller promptly if breaker turns off because of faults.
断路器遇故障分断后，智能控制器能显示出故障类别、故障相序及故障电流值、分断动作时间值。
The results of simulation and test of actual system shows that the intelligent controller has good stability and robust, it can satisfy well the performance guideline of the project.
实际系统的仿真结果表明，本论文所设计的智能控制器具有良好的稳定性和鲁棒性，能够很好地满足工程中所要求的性能指标。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
The ironing unit (7) is assembled in the middle of the wardrobe body (1), and the rotation of a rotary shaft (8) and the motion of ironing clothes are controlled by the intelligent controller (4).
熨烫器(7)安装在柜体(1)中部，绕转轴(8)翻动的动作和熨烫衣裤的动作由智能控制器(4)控制。
This paper presents the structure and principle of intelligent home system. It introduces the pivotal parts of X10 communication technology, and give the design of controller based on it.
本文研究了智能家居系统的结构和工作原理，介绍了X10电力线载波技术的关键部分，并在此基础上设计了网络控制器。
The design of the interfacing circuit for the intelligent position controller composed of 8031 single chip computer and the usage of single chip computer resource are emphasized.
重点介绍用8031单片机构成的智能位置控制器的接口电路设计的特点以及单片机资源的利用。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Thirdly, combining MCU clip AT89C51 with bus controller SJA1000, an intelligent control CAN node for the experimental platform is designed.
然后将MCU芯片at89c51和SJA1000总线控制器结合，为实验平台设计了实时可靠的智能控制CAN节点。
This paper describes that the combination of neural networks and fuzzy controller make the designing an intelligent controller for variable piston pumps become feasible and realistic.
本文根据变量泵的具体情况，为其设计了自适应的神经网络模糊控制器，实现了变量泵的智能控制。
Introduce the intelligent reactive compensating controller based on PIC single computer, it has lower cost, flexible arrange, higher reliability and performance.
介绍了用PIC系列单片机构成的智能无功补偿控制器，该控制器具有高性能、低价位、高可靠性、配置灵活的特点。
By designing the communication and back-end management software and simulated entrance guard controller program, we realized the centralized and distributed intelligent management.
通过设计通信和后台管理软件，以及模拟前端门禁控制器程序，实现了网络集中与分布式智能化的管理。
The controller has been used to control the motor of the intelligent artificial leg designed by the authors.
该控制器已用于控制由作者设计的智能人工腿中的执行电机。
The advanced intelligent algorithm is also designed for controller to process the data received from analog detector, through which the veracity of fire detection is greatly improved.
为控制器设计了先进的智能型算法，用来对模拟量探测器传过的信息进行处理，大大提高了火灾报警的准确性。
The general intelligent controller for building automation system (BAS) is composed of AT89S52 and RS232 interfaces, modulus conversion chip, dynatron and NE4100 gateway etc.
楼宇自动化用智能控制器由at89s52、RS232接口、模数转换芯片、三极管及NE4100网关等组成。
The intelligent home appliance controller based on CAN bus and LPC2294 microprocessor was designed.
设计了基于CAN总线和LPC 2294的智能家电控制器。
The intelligent node of using microchip AT89S51, CAN controller SJA1000 and the CAN transceiver are also developed.
同时还利用微处理器AT89S51、CAN控制器SJA1000和CAN收发器开发了智能节点。
In this paper, the design method and process of intelligent controller is narrated from the view of hardware and software.
从软件和硬件角度详细介绍了智能调节器的设计原理和方法。
The part of neural network of the intelligent self-tuning PID controller based on BP network learns the learning sample.
由设计出的基于BP神经网络的智能自整定PID控制器的神经网络部分对学习样本进行学习。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Based on an in-depth study of specific chips BLDC motor controller, development the numeric intelligent controller based on DSP.
在研究了基于电机专用控制芯片的无刷直流电机模拟控制器的基础上，开发了基于DSP的全数字智能控制器。
应用推荐