Development and improvement for the reheating furnace Level 2 system.
开发和改进的加热炉二级系统。
The service life of the reheating furnace has been prolonged when it was used.
通过在轧钢加热炉上的喷补实践，较大地延长了加热炉的使用寿命。
This paper introduces the principle and application of the exchanger to the reheating furnace of steel rolling plant.
本文介绍了热管的工作原理，以及热管换热器在本厂轧钢加热炉上的应用效果。
The reheating furnace in hot strip mill had high energy consumption, low heating quality, high metal loss and high failure rate.
针对热轧带钢加热炉能耗高、加热质量差、氧化烧损大、故障率高等问题进行技术改造，达到节能降耗的目的。
This paper introduces that the combustion technology of coal-water-slurry (CWS) can be applied successfully to the reheating furnace.
本文研究了水煤浆燃烧技术在轧钢加热炉上的应用，并获得成功。
The principal aspects and effects of reconstruction and operation improvement of the reheating furnace at Yingkou Plate Mill are discussed.
论述了营口中板厂加热炉结构改造和操作改进的基本内容和效果。
Through the analysis and comparison of reheating furnace energy consumption, it was shown that the reheating furnace had greater energy saving potential.
通过加热炉能耗分析和对比表明，加热炉具有较大的节能潜力。
The present situation and several heat insulation structures of the water-cooled skid and post lining in the reheating furnace at Baosteel are introduced.
介绍加热炉水冷梁、立柱包扎耐材的使用现状和几种隔热结构形式。
In the meantime the author makes an assessment of the operation of the reheating furnace in order to provide the decisive evidence for optimization and improvement of the reheating furnace.
对加热炉运行状况进行评价，为加热炉的优化改造提供决策依据。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
The reformation of side discharge roll table of continuous reheating furnace is introduced.
介绍了端出料连续式加热炉炉头辊道的改造。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
At present, the chain grates have been extensively applied to medium-and small-size coal-fired reheating furnace, and good effects achieved.
目前，链式炉排已广泛地应用于中小型燃煤加热炉，并取得了可喜的成果。
The structures and thermotechnical characteristics of reheating furnace heads of the traditional, useless-space reduced and short-landslide types are discussed.
论述了端出料轧钢加热炉“传统”炉头、“少闲区”炉头、“短滑坡”炉头的构造及其在热工方面的特性。
This paper establishes a continuous dynamic mathematic model of reheating furnace and based on which, resolves the problem of minimum consumption control of the furnace.
以某钢厂推钢式连续加热炉为背景，建立了加热炉的动态数学模型，并在此基础上解决了加热炉最小能耗优化控制问题。
Information of the rolling process can be feed back to the reheating process, and the temperature setting of reheating furnace can be adjusted dynamically based on the rolling information.
实现了将轧制生产的过程参数信息反馈到加热生产工序，对加热炉炉温设定进行基于轧制参数信息的动态调节。
The heat flux to slab surface of a walking beam reheating furnace along length of the furnace is computed, and total heat exchange factor is also calculated.
以某轧钢厂的一台步进梁式加热炉为例，计算了钢坯表面热流沿炉长方向的分布，并反算求解总括热吸收率。
This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.
本文介绍了锡兴钢铁公司，为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。
Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
由于再加热炉出料方式设计上的原因，限制了PQF轧机生产线的轧制节奏，从而影响产量。
The practical production show that the converter gas can be used in reheating furnace of steel rolling.
实践证明，轧钢加热炉使用转炉煤气是可行的。
The thermal status model is established according to a certain walking beam reheating industrial furnace and the flow field, combustion and heat transfer condition in the furnace are simulated.
本文通过对轧钢步进梁式加热炉内热工状态建模，并对炉内流体流动、燃烧化学反应、传热过程进行了模拟仿真。
As the main process equipment in metallurgy enterprise, the strategy of automatic control of reheating furnace is one of the most important research topics in the field of related process control.
加热炉是冶金企业主要的过程设备，其自动控制策略是过程控制领域内的一个重要的研究方向。
This paper introduces emphases, difficulty and countermeasure in the construction of pusher type continuous reheating furnace.
阐述中厚板推钢式加热炉施工中的重点、难点问题以及解决方法。
The new process and technology on the "gas replace heavy oil" engineering project for reheating furnace of the 1700 hot strip in WISCO are introduced.
介绍了武钢1700热轧加热炉＂油改气＂燃料替代改造工程中采用的新工艺及技术。
The new process and technology on the "gas replace heavy oil" engineering project for reheating furnace of the 1700 hot strip in WISCO are introduced.
介绍了武钢1700热轧加热炉＂油改气＂燃料替代改造工程中采用的新工艺及技术。
应用推荐