The cleanliness of molten steel is a key factor for thin slab casting.
洁净钢的生产是薄板坯连铸的关键问题。
Schedule rules for two-strand thin slab casting and rolling were established.
首先建立了两流薄板坯连铸连轧流程生产调度规则库。
Flatten the box so that it looks like a thin slab and move it so that the camera is above it.
把盒子压扁使其看上去像是一块薄板，再把它移动到相机的下方。
The major key of this technology is to assure the good quality and the less crack of thin slab .
其技术的重要关键是保证薄板坯具有良好质量，铸坯的裂纹缺陷较少。
The slab quality was the key to the research of thin slab continuous casting and rolling process.
铸坯质量问题是薄板坯连铸连轧工艺研究的核心问题。
The process of thin slab continuous casting and direct rolling is different from the traditional one.
薄板坯连铸连轧工艺的生产流程有别于传统工艺流程。
The experimental results are of certain significance in guiding the design of the thin slab CC mold flux.
实验结果对于薄板坯连铸保护渣的设计具有一定的指导意义。
It will also foster the further perfection of EAF technology and the ubiquitous use of Thin Slab Casting.
回收再利用也将推动电弧炉技术的进一步完善和薄板坯连铸技术的广泛采用。
Buffer time of tunnel furnace is the key process in thin slab continuous casting and rolling (TSCR) line.
在薄板坯连铸连轧生产线中，加热炉的缓冲能力有时成为制约生产的关键。
There are two core techniques in thin slab CC:one is curved mold and the other one is liquid core reduction.
薄板坯连铸有两个主要核心技术：一个是曲面的结晶器，一个是液芯压下技术。
It is of great importance to rhythm and coordination of the thin slab continuous casting and rolling process.
时间因素对薄板坯连铸-连轧流程的节律性、协同性而言，其意义尤为重要。
The movement of slabs in reheating furnace from two-strand thin slab continuous caster operations is discussed.
讨论了两流薄板坯连铸连轧作业时铸坯在加热炉内的运动情况。
By tracer method, the inclusion behavior during FTSC (flexible thin slab casting) thin slab casting was studied.
采用示踪法研究了FTSC薄板坯夹杂物行为。
The main problems of low carbon low silicon steel during the early time in the medium-thin slab caster in the No.
济钢第三炼钢厂利用中薄板连铸机生产低碳低硅钢的初期，主要存在钢水成分控制和可浇性的问题。
It showed that EMBR could control vortex and improve the flow field in the thin slab continuous casting mould effetely.
计算表明，电磁制动对于抑制涡旋、改善薄板坯连铸结晶器中的流场有明显效果。
This paper mainly introduces the mould breakout detection system function arithmetic of thin slab caster in Tang Steel.
本文主要介绍了唐钢薄板坯连铸机结晶器漏钢预报系统的功能算法。
The thin slab continuous casting technique had been adopted in metallurgical production to gain the remarkable benefits.
薄板坯连铸技术已应用于冶金生产并取得显著效益。
Rather new manufacturing technologies such as thin slab casting rolling and twin roll casting technology were prospected.
介绍了具有代表性的研发趋势，如薄板坯连铸连轧、双辊薄带铸轧等新工艺。
Macroscopic fluid flow and heat and mass transfer should be taken into account for the continuous thin slab casting process.
薄板坯连铸工艺应综合考虑传热、流动与传质宏观传输现象。
It is pointed out that the inclusion content in melting steel and the status of caster play a key role for quality of thin slab.
指出在薄板坯连铸工艺流程中，钢水中夹杂物含量及连铸机工艺设备情况对薄板坯的质量起决定作用。
At present, some 60 thin slab strands are in operation or scheduled worldwide, of which about half have been equipped with EMBRs.
目前，大约有60条薄板坯生产线已经或正在计划投入运行，其中大约一半装备了电磁制动。
The vortex flow and mold flux entrapment in the thin slab continuous casting mold was investigated using a 1/4 scale water model.
利用1/4水模型对薄板坯连铸结晶器内的涡流及卷渣行为进行观察研究。
This system can solve the dynamic schedule problem of two-strand thin slab casting and rolling and optimize production management.
该调度系统可以较好地解决两流薄板坯连铸连轧流程的动态调度问题，进一步优化生产组织。
A video will be presented showing how steel flow in a thin slab caster with a tapered mold is influenced and calmed down when using the EMBR.
本文用一段录像显示一个带有一定锥度的薄板坯连铸结晶器内的钢液流动在使用了电磁制动后是如何受到影响并逐渐减弱的。
In contrast to conventional process, some thin slab casting and direct rolling process have similar or even better index in a few aspects of product.
与传统工艺相比，在一些直轧工艺中，其产品性能指数接近甚至在个别方面更优。
In this paper, mathematical model and FEM software for the simulation of thermal process during continuous casting and rolling of thin slab were developed.
本文针对连铸连轧的热过程，建立了各工艺的热过程的数学模型，并开发了相应的软件。
The temperature flied distribution and deformation in the mould of thin slab were calculated, moreover, the regularity of shell growth and shrinkage was obtained.
计算出薄板坯在结晶器内温度场分布和变形，在此基础上得到了坯壳生长、收缩的规律。
The causes and affecting factors of continuously casting thin slab are analyzed theoretically, the precautions are proposed according to the conditions of Tanggang.
从理论方面分析了薄板坯纵裂纹产生的原因。结合唐钢实际，提出了解决薄板坯纵裂纹的措施。
The status of thin strip production in thin slab casting and rolling process at Zhujiang steel is introduced, and main factors which affected the production is analyzed.
介绍了珠钢薄板坯连铸连轧生产线薄规格的生产情况，分析了影响薄规格生产的主要因素。
The strip products on medium thin slab casting and direct rolling line were analyzed based on the characteristics of the medium thin slab casting and direct rolling line.
本文主要从中薄板坯连铸连轧的特点出发，对中薄板坯连铸连轧的产品品种进行了分析。
应用推荐