Two-phase three dimensional flow velocimetry by laser digital holography is being presented.
研究了利用激光数码全息技术实现两相流三维空间速度场测量的方法。
The back pressure and the rotational speed have great influence on the performance of the three dimensional flow-path.
转速和背压对三维进气流道的性能有较大影响。
A quasi three dimensional flow Euler model with viscous force terms was constructed for integrated small turbofan engine systems.
建立了一体化弹用小涡扇发动机系统含粘性力项的准三维欧拉流动模型。
The reason of tool_trapping appeared in the numerical control milling of three dimensional flow impeller is analyzed and the solving measure is put forward.
分析了离心式压缩机三元叶轮数控铣制时出现挖刀现象的原因，提出了解决措施。
The three dimensional flow of metals during rolling of ingot with liquid core has been studied in the article. Here the influence of liquid core ratio on rolling was studied in particular.
本文研究了液芯轧制时三维空间中金属流动，着重地研究了液芯率对轧制的影响。
The test results of the three dimensional flow condition and temperature field of deep water discharge can be used as scientific basis for planning of the similar outfall of power plant.
所得到的规律特征经实际工程的物模试验结果初步检验被证明可信，可作为电厂规划阶段深层排水方案温排水掺混稀释效果的估算分析方法加以采用。
In this article the mathematical expression of field synergy theory for three dimensional flow with centrifugal force was derived by integrating the energy equation in the concerned volume.
通过对能量方程进行体积分得到了三维流场中场协同理论的表达式。该式不仅含速度矢量与温度梯度矢量的点积项，还含有速度矢量与压力梯度矢量的点积项。
The three dimensional flow field of the step cylinder in Hydraulic Control Rod Driving System (HCRDS) is calculated and analyzed with the computational fluid (dynamics) program CFX5 in detail.
应用计算流体力学程序CFX5对水力驱动控制棒步进缸内部的三维流场进行了计算和分析。
The three dimensional flow field for the bell type swirl chamber diesel engine is first calculated. The calculated results and LDV measured data are compared, which show fairly good agreement.
首次对吊钟型涡流室式柴油机的流场进行了3维计算，计算结果与LDV实验结果具有良好的一致性。
Based on the 3d aerodynamic stability model, the related active control technique and the open-loop transfer function have been provided, in which the three dimensional flow effects are involved.
在轴流压气机三维气动稳定性模型的基础上，给出了考虑轴流压气机三维效应的主动控制模型及其传递函数。
In order to study characteristics of the calciner, it is significant to simulate the three-dimensional flow in calciner with proper mathematical models.
为充分了解分解炉的性能，应用适宜的模型来模拟分解炉内部三维流场是很有意义的。
The main strategy should include in itself the use of three-dimensional flow theory, improvement of vanes stacking skill, control of hydraulic losses, and use of CFD in vane design procedure.
采用三维流动理论，改变叶片造型方法，控制水力损失和引入CFD方法是提升现有轴流泵叶片设计的主要策略。
By using CFD software FLUENT, numerical simulation for the three-dimensional flow of air between honeycombed plate heat transfer components is carried out.
应用CFD软件FLUENT对蜂窝板传热元件板间空气的三维流动进行了数值模拟。
A compressor end-modified cascade and its original cascade are compared experimentally to study the three-dimensional flow characteristics at the exit plane of the cascade.
文中通过压气机叶片“修型”叶栅和常规叶栅的对比实验，研究了“修型”叶栅栅后三维流动特征。
At the same time calculation of the numerical simulation is carried out on the flow field of HL220 runner. Its result shows that BEM is effective on the calculation of three-dimensional flow field.
并对HL 220转轮流场进行数值模拟计算，结果表明此法是进行三维流场计算的有效方法。
Three-dimensional flow field in the elutriator of polythene packed system is simulated.
模拟了聚乙烯填充体系淘析器内的三维流场。
The three-dimensional flow field of annular combustor for aero-derivative gas turbine burning gas fuel was numerically simulated.
采用数值模拟方法对燃用天然气的某型航改燃气轮机环形燃烧室进行三维流场分析。
There is a difference between the numerical simulation results of two-dimensional and three-dimensional flow field in supersonic inlet, which shows the influence of boundary layer on the side wall.
超声速进气道的三维流场数值模拟结果与二维数值模拟结果存在较明显的差别，说明进气道侧壁附面层的影响不容忽略；
According to the "General Theory of Three-Dimensional flow in Turbomachines", the quasi-three dimensional calculation of the transonic flow field has been achieved for a compressor rotor.
本文依据三元流动的通用理论，完成了一个跨声速压气机转子流场的准三元迭代计算。
Moreover, a three-dimensional flow field of the retarded adhesive mortar in a single-screw extruder is obtained after supposition, simplification and carrying on the boundary treatment.
结合假设经过简化和边界处理，得出单螺杆挤出机中缓凝砂浆的三维流场。
Turbulence is an extraordinarily complex three-dimensional flow which is unsteady, inerratic and composed of eddies.
湍流是一种高度复杂的三维非稳态、带旋转的不规则流动。
Based on the Reynolds Stress Model, the three-dimensional flow field was numerically simulated using the Reynolds averaged N-S system equations.
从雷诺应力模型出发，通过求解雷诺平均N - S方程组获得三维湍流流场的数值解。
The model of three-dimensional flow in circular bend tube which is widely used in gas exchange system of internal combustion engine is developed in this paper.
建立了内燃机换气系统普遍使用的弯曲圆形管道气体流场计算的三维模型及有关边界条件。
The finite element method is used for the three-dimensional flow field calculation in designing centrifugal pump impellers.
为进行离心泵叶轮的三元设计，用有限元方法解决了离心泵叶轮三元流场的计算问题。
Three-dimensional flow simulation of mixing zones in a new conical twin screw extruder with mixing blocks is performed with a finite element package, ANSYS.
利用ANSYS有限元分析软件对带有混合块的新型锥形双螺杆的混合段流场进行了三维模拟分析。
Three-dimensional flow simulation of flight element in mixing zone of a conical twin-screw is performed with a finite element package, ANSYS.
用ANSYS有限元分析软件对锥形双螺杆螺纹元件流道的流场进行了三维模拟。
Three-dimensional flow simulations of the flight element in an intermeshing co-rotating twin screw extruder are performed by solving the Navier Stokes equations with a finite element package, ANSYS.
利用A NSYS有限元分析软件对啮合同向双螺杆挤出机的螺纹元件流场进行了三维等温非牛顿模拟分析。
The three-dimensional flow field of a centrifugal impeller for aircraft cooling turbine is computed with quasi-orthogonal surface method including the influence of upstream and downstream conditions.
用任定准正交面方法对一个航空涡轮冷却器的离心压气机叶轮流场进行了三元计算，计算考虑了上下游边界条件的影响。
The three-dimensional flow field of a centrifugal impeller for aircraft cooling turbine is computed with quasi-orthogonal surface method including the influence of upstream and downstream conditions.
用任定准正交面方法对一个航空涡轮冷却器的离心压气机叶轮流场进行了三元计算，计算考虑了上下游边界条件的影响。
应用推荐