A general tooth profile of sprocket is proposed.
提出了链轮的通用齿形。
Cycloid was used to modify the involute tooth profile.
用摆线对渐开线齿轮齿形进行修形。
We are able to offer the tooth profile of chain and sprocket.
我们有能力提供各种形链和链轮。
And has studied this medium rack tooth profile curve structure method.
并研究了这种媒介齿条齿廓齿形曲线的构造方法。
Pitch Point is the intersection of the spline tooth profile with the pitch circle.
节点是键齿的齿廓与节圆的交点。
Its basic gear tooth profile is double circular arc spiral bevel gear tooth profile.
双圆弧弧齿锥齿轮是将点啮合制圆弧齿轮传动形式运用到锥齿轮上的成功例子。
Analyses the internal gear tooth profile by using conjugate outline's meshing theory.
利用共轭齿廓的啮合理论对内齿轮进行了齿形分析。
The parameter equation of involute tooth profile on any angular position is presented.
提出了任意转角位置的渐开线齿轮齿廓的参数方程。
The saw-tooth profile of the zinc-covered facade helps to distinguish the different units.
锌板饰面的锯齿形建筑外轮廓有助于区别不同的单元。
On the basis of principle of engagement this paper established a precise model of tooth profile.
根据啮合原理，建立了轮齿齿廓的精确模型。
This paper is based on the features of tooth profile and helix tolerance zone of transmission gears.
针对变速箱齿轮齿形齿向公差带的特点。
Internal gear pump has two kinds of tooth profile namely: involute profile and cycloidal tooth profile.
内啮合齿轮泵有两种齿形即：渐开线齿形和摆线齿形。
An analytical formula for calculating conformal mapping function of the sprocket tooth profile is given.
给出了链轮齿廓保角映射函数的解析表达式。
A modified tooth profile is thus developed taking accounts of gear strength, manufacturing and service, etc.
然后从强度、制造和使用等方面考虑，提出一种改进齿形。
So it will markedly increase the efficiency of finite element analysis and optimization of the tooth profile.
显著地提高了对齿形进行有限元分析和优化的效率。
This paper probed deeply into the generation of tooth profile and meshing mechanism of this typed transmission.
文中深入探讨了该型传动的齿廓形成和啮合机理。
This paper discussed the relationship between the involute pitch of tooth root and tooth profile involute in hobbing.
本文阐述了滚刀滚齿时齿轮齿根过渡曲线的延长渐开线的等距线与齿轮齿形渐开线的关系。
According to the theory of gearing, equation of the meshing line can be deduced from the tooth profile of basic rack.
根据齿轮啮合原理，由基本齿条的轮廓曲线能够获得其啮合线方程。
The errors of grinding wheel dressed by diamond point cause the race to produce non-circular arc tooth profile errors.
金刚石笔修整砂轮误差使滚道在磨削时产生非圆牙形误差。
The energy integration method is also put forth to solve stiffness approximately by linear approximating the tooth profile curve.
提出直线逼近齿廓曲线近似求解该齿轮刚度的能量积分法。
Meanwhile obtained the tooth profile equation of pin-track by the tooth profile normal law which matched the inviolate-cycloid compound gear.
同时利用齿廓法线法得出与该复合齿轮相配套的销轨齿廓方程。
Tooth profile machining of mid-concave gear with narrow run-out groove is introduced, which solves a difficult problem using traditional machining.
介绍了工件退刀槽宽度小于机床退刀行程的内凹齿轮的齿形加工方法，解决了传统加工方法不易实现的难题之一。
During ausform finishing process of hardened gears, there is plastic displacement of metal on the tooth surface and the distortion of tooth profile.
在齿轮热滚挤加工中，轮齿上的金属在强制挤压力的作用下沿齿面产生塑性流动，使齿形发生变化。
The result of static calculation showed that the tooth profile long modification of spur bevel gear possesses better effects of vibration reduction.
静态计算结果表明，直齿锥齿轮齿廓长修形具有较好的减振效果。
This article introduced the double pin roll breaker's survey and the tooth profile and the roller tooth arrangement design situation analysis briefly.
介绍了双齿辊破碎机的概况和齿形与辊齿布置设计情况。
So it is necessary to improve measures by adding the sweeping side teeth and modifying the tooth profile from rectangle into circular arc in the top disc.
据此在端盘上增加扫边齿和齿座外形由直角形改为圆弧形的改进措施。
The result indicated that the method of double dick-type cutter milling can reduced the tooth profile allowance and improved the asymmetry of tooth profile allowance.
分析结果表明，采用双盘铣刀加工的方法，可以减少齿廓余量，改善齿廓余量的不均匀性。
This paper introduces the generating method and presents equation, characteristics, some design considerations and manufacturing method of tooth profile of the cutter.
本文介绍了针轮销孔展成技术，给出了刀具齿廓方程、特点及其设计方法。
This paper USES cutting tool with the contact line of conjugate tooth profile based on the principle of the gear engage and generating shape line forming conjugate engage.
本文依据齿轮啮合原理，利用产形线形成共轭啮合的原理，采用共轭齿面接触线为刀刃构形的切齿刀具，这样构形的切齿刀具都非常简单，并且容易采用合理的几何角度。
Taking the straight-line-rack as the tool the error of straight generatrix is measured and by error analysis the tooth profile error and tooth orientation error can be obtained.
以刃边齿条为工具，测量廓面的直母线族误差，通过误差处理与分析获得齿廓总偏差和螺旋线总偏差。
应用推荐