This method can be used in research on air-liquid two-phase flow.
该方法可在气液两相流的研究中获得应用。
The void fraction of annular two-phase flow inside cylinder is analyzed.
对圆管内环状两相流的空泡份额进行了分析。
Improved models regarding dense gas-particle two-phase flow are proposed.
提出了模拟稠密气固两相流动的改进模型。
This paper has simulated two-phase flow in a small expansion ratio nozzle.
本文对小扩张比喷管内的两相流场进行了数值模拟。
Phase separation takes place when a two-phase flow passes through an orifice.
两相流流过孔板产生相分离。
Detonation in suspended aluminum dust in tubes was analyzed with two-phase flow model.
用两相流模型对爆轰波管中的悬浮铝粉尘的爆轰波进行了研究。
The two-phase flow field in the vicinity of the nozzle orifice was studied numerically.
对喷嘴出口附近的两相流场进行了数值计算，并针对相关结果进行了分析。
The aim is to provide a model for the two-phase flow and to establish a calculating method.
研究的目标是建立斜板沉降器的两相流数学模型及其计算方法。
The two-phase flow heat transfer capability is tested and compared with the smooth helical tube.
实验研究了微肋螺旋管内两相流动传热性能，并与光滑螺旋管进行了比较。
One-dimensional homogeneous model based on the gas-liquid two-phase flow theory was established.
基于气液两相流理论，建立了垂直上升管内液氮气液两相流动的一维均相流模型；
AJB two phase flow slurry pump is designed by adopting the newest two-phase flow theory of China.
AJB型系列两相流纸浆泵是采用国内最新的两相流理论设计而成。
Particle velocity is an important parameter describing the flow state of gas-solid two-phase flow.
颗粒的流动速度是反应气固两相流流动状况的一个重要参数。
This dissertation focuses on the application of data fusion in two-phase flow regime identification.
将数据融合技术应用于流型辨识研究，对其中的层次、结构等问题进行了深入的探讨。
Relations between differential pressure signal and two-phase flow parameters are studied in the dissertation.
研究了差压波动信号与两相流系统参数之间的关系。
Flow boiling heat transfer in narrow channels is an important researching project of gas-liquid two-phase flow.
狭缝通道内的流动沸腾传热是汽液两相流研究的一个重要方面。
This paper deals with the effect of ultrasonics on liquids flow through porous media, especially two-phase flow.
本文主要研究了超声波对多孔介质中液体流动的影响，尤其是两相流动的影响。
The water holdup is a key parameter of the oil-water two-phase flow for production, dehydration and transportation.
油水两相流在石油工业中广泛存在，其分相含率是一个重要检测参数。
A steady state isothermal two-phase flow model is presented in this paper to study water transport in PEM fuel cells.
本文给出了一个用于研究PEM燃料电池内水迁移的稳态、等温、两相流模型。
Starting from N-S equations of fluid mechanics, the flow mathematical model of two-phase flow in pipe is established.
从流体力学中的N - S方程出发，建立了圆管两相分层层流的流动数学模型。
To simulate the cluster formation in dense two-phase flow, a multi-lattice actual trajectory (MLAT) model is developed.
提出了数值模拟稠密气固两相流动的多重格子-真实轨道模型（MLAT模型）。
Its basic principle is that there is a quite steady flow state of annular flow in the flow pattern of gas-liquid two-phase flow.
模型是建立在压力能量消耗率最小的原理上的，其基本原理是：在气-液两相流的流型中，环状流具有相当稳定的流动状态。
With optimized multi-electrode array conductance sensor, a two-phase flow measurement system based on DSP technique was designed.
针对优化后的纵向多极阵列电导式传感器，本文构建了基于DSP技术的两相流测量系统。
A method of using metal probe for measuring the void fraction at any point in gas-liquid two-phase flow on Sieve tray is described.
用金属探针法测量塔板上气液两相流中某些点的含气率。
Recurrence analysis method and its application on the identification of two-phase flow patterns were placed emphasis in this paper.
本文重点研究递归分析方法及其在两相流流型识别上的应用。
Theoretical approach of two-phase flow instability can be divided into two categories: numerical analysis and approximation analysis.
两相流不稳定性理论分析方法可以分为两大类：一类是数值解析法，另一类是近似分析法。
Then the corresponding sonic velocity of the two-phase flow is determined by the void ratio, pressure and density of the liquid phase.
其对应的音速与汽液两相流体的空泡率、压力及液相密度等因素有关。
Based on the theory of two-phase flow, the equation of the pressure gradient is found for the short pipe in cavitation jet cutting set.
基于两相流体动力学的理论，建立空蚀射流切割装置中短管内的压力变化梯度的基本方程式；
This paper discusses the velocity separation in two-phase flow and the application of cross-correlation technique in two-phase flow measurement.
本文讨论两相流流动中的速度分离和相关法在两相流测量中的应用。
In this paper, two-phase flow interior ballistic model is set up on the basis of the characteristics of complicated separate loading mixed charges.
根据复杂的分装式混合装药的特点，建立起多相流内弹道模型。
In this paper, two-phase flow interior ballistic model is set up on the basis of the characteristics of complicated separate loading mixed charges.
根据复杂的分装式混合装药的特点，建立起多相流内弹道模型。
应用推荐