For universal machine and heavy milling.
对于通用机械和重型铣削。
The model has the basic components of the universal machine, and meets data-driven requirements for the modular unit.
该模型具备了通用机床的基本组成部件，满足模块化单元的数据驱动要求。
Finally, two methods of laboratory simulation tests on universal machine tools and the tapping-torque test method are introd...
介绍了两种在通用机床上进行的模拟切削试验方法以及攻丝扭矩模拟评定试验机。
This paper accounts for the method of the optimum design of the main gearing system for universal machine tools, taking the radial drill for example.
本文以臂摇钻床为例，说明了通用机床主传动系统优化的设计方法。
Use the method of the frequency governor with machine speed. Bring about a stepless regulation of all constant power range, in the rotating main movement of universal machine tools.
用变频调速和机械变速相结合的方法，在主运动为旋转运动的通用机床中，实现全部恒功率范围内的无级调速。
This paper deals with the general procedure and essence of equivalent design methtod systematically , which can be applied for guiding the working capacity design of Universal Machine Parts(UMP).
系统地论述了当量设计的一般过程和本质，以用于指导通用机械零件的工作能力设计。
Each Bluetooth service on a machine needs a unique identifier, so I decided to give this service the UUID (Universal unique identifier) of 8841 (it could be any four-digit number you choose).
机器上的每台蓝牙设备都需要惟一的标识符，所以我决定将这个服务的UUID(统一惟一标识符)定为8841(可以是任意四位数字)。
This simplest imaginable "first universal life machine" needed two main components.
最简单最可能的”第一生命“需要两个主要成分。
Moreover, Wolfram, and Matthew Cook have proven that rule 110 is computationally equivalent to a universal Turing machine.
此外，Wolfram和MatthewCook还证明了110规则在计算上等同于一个一般性图灵机。
That is, they are capable of computation in the same manner as a universal Turing machine.
也就是说，他们是在计算能力作为一个通用图灵机的方式相同。
The testing person USES the universal testing machine to make material mechanical testing.
化验人员用万能材料试验机做材料机械性能试验。
Universal tensile testing machine can analyze the test results, such as elongation, average value, the stress, strain and damage, etc.
万能拉力试验机可剖析整个测验的成果，例如伸长量、应力、应变、损坏值、平均值等。
We need a universal milling machine.
我们需要一台万能铣床。
Universal joint balancing machine: coupling drive is the use of universal joints will balance the spindle and the rotor connected.
万向节平衡机：联轴器拖动是利用万向节将平衡机主轴与转子相联接。
This machine is called universal bridge crane.
这种机器叫通用桥式起重机。
ABS samples of physical aging and strain aging were studied by universal tensile test machine and differential scanning calorimeter (DSC).
用万能拉伸实验机和差示扫描量热仪(DSC)对物理老化和应变老化的ABS试样进行研究。
The microstructures and properties of ZQA19-4 alloys were studied by Scanning electron Microscope (SEM) and electronic universal experimental machine.
采用扫描电镜和电子万能实验机，研究了合金元素对ZQA19 - 4合金显微组织和性能的影响。
And old-fashioned hydraulic test machine and electronic universal testing machine servo control system of the computer, automatic acquisition and data processing system transformation.
并对老式液压试验机及电子万能试验机进行微机伺服控制系统改造，自动采集及数据处理系统改造。
There are sound physical and chemical inspection equipment, optical microscope, universal test machine, desktop sclerometer.
还有完善的理化检验设备，金相显微镜、万能性试验机、台式硬度计。
Because hydraulic universal testing machine does not control speed of loading accurately, it does not with national criterion of testing condition.
老式液压万能试验机，因不能对加载速率准确控制，已不符合国际标准对实验条件的规定。
The specimens were tested in a universal testing machine.
用电子万能测试机于核的舌侧垂直牙体长轴加载。
Acquired mechanics data by WDW-5 universal testing machine, mechanical and rheological properties of potato tuber were studied.
由WDW—5万能试验机获得力学数据，研究马铃薯块茎的力学流变学特性。
Universal set of technology, make precision machine tool spindle use Angle contact ball bearing realized either way matching use.
万能组配技术，使精密机床主轴用角接触球轴承实现了任意方式的配对使用。
Our main products are: E-Rally, electronic universal testing machine series; hot deformation.
公司主要产品有：电子拉力、电子万能试验机系列；热变形。
Presented and realized an universal card of Machine Vision detection based on PCI local bus.
提出及实现了一个基于PCI局部总线的通用视觉检测平台。
It introduces how to calibrate standard gauge block with the help of universal length measuring machine. It simplifies calibration link, improves work efficiency and cuts down company's expense.
简述了利用万能测长机对基准量块进行校准的方法，简化了校准环节，提高了工作效率，为公司节省了开支。
The process of stress control in material testing by using the electronic universal testing machine is a complicated process.
电子万能试验机在材料试验中的应力控制是个复杂的过程。
The discrete attributes were required by voluminous methods on machine learning, but continuous attributes are universal in practice.
机器学习中很多方法要求目标属性是离散的，而实际中很多属性是连续的。
The discrete attributes were required by voluminous methods on machine learning, but continuous attributes are universal in practice.
机器学习中很多方法要求目标属性是离散的，而实际中很多属性是连续的。
应用推荐