Erbium-doped optical waveguide is used to fabricate optical waveguide amplifiers.
掺铒光波导主要用来制作光波导放大器。
The proposal can be used to fabricate a higher-grade Guqin, capable of leading to better timbre effect.
该方案可用于制作更高档的古琴，能获得更好的音色效果。
Then RT technology is used to fabricate emitter and rapid spray tooling for trial-produce of the emitter.
应用快速模具技术制备滴管快速喷涂模具，进行产品试制；
It is shown that the developed mixed resin systems can be used to fabricate RTM structural composite parts.
所研究的混合型树脂体系可用于RTM结构复合材料构件。
The high-voltage CMOS process used to fabricate this device also means it can endure voltage surges up to 30V.
用于制造这种装置的高压CMOS工艺也意味着它可以承受浪涌电压高达30V。
A significant amount of the lumber used to fabricate the NLT comes from trees killed by the mountain pine beetle.
一个显著的特点是大量被松山甲虫损坏的树木的木料被用了制造NLT。
Plastruct trod was used to fabricate the railing and ladder steps for the spindle, and they were simply glued into place.
plastruct杆被用来制造栏杆和梯子的步骤为主轴，而他们只是粘到的地方。
Ceramic powders colloidal processing techniques are used to fabricate large size, complicated shape ceramic parts of high reliability.
陶瓷粉体的胶态成型方法是制备高可靠性、大尺寸、复杂形状陶瓷部件的有效方法。
Welders not in the employ of the Manufacturer may be used to fabricate pressure vessels, provided all the following conditions are met.
[uw - 26d]如满足以下所有条件，则不是该制造商所雇佣的焊工也可用于制造符合本册要求的压力容器。
Different mechanisms are provided for securing the sleeve to the tank depending upon the particular materials used to fabricate the tank.
根据用于制造所述罐的特定材料提供不同的用于将所述套管紧固到所述罐上的机构。
This feature not only can be used to cancel unwanted polarization effects in optical system, but also can be used to fabricate phase retarder.
利用薄膜的这一特性可以消除光学系统中不想要的偏振效应以保持光的偏振状态，也可以用来制作薄膜位相延迟片。
Spheroidal graphite cast iron and graphite are chosen as raw material separately, ball milling method is used to fabricate carbon microspheres.
分别以球墨铸铁和石墨为原料，采用机械球磨法成功制备了碳微球。
Wallboards are produced by methods which use significantly reduced Embodied energy when compared with the energy used to fabricate gypsum wallboard.
通过与制造石膏墙板所使用的能量相比利用显著降低的物化能的方法制造的墙板。
ZnO can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
An implanter without ion mass analyzer was used to fabricate thin SOI materials by low energy and low dose water ions implantation instead of conventional SIMOX.
采用无质量分析器的离子注入机，以低能量低剂量注水的方式代替常规SIMOX注氧制备soi材料。
A pair of functionally gradient piezoelectric cantilevers was used to fabricate a microgripper, which is used as the micromanipulator of micro robot operating system.
利用梯度功能压电执行器设计和制作了双悬臂梁结构的微夹钳，用作微型机器人操作系统的操作手。
Femtosecond laser direct writing in transparent materials and the two-photon photopolymerization technology are used to fabricate the phase-gratings and Dammann grating.
采用飞秒激光透明材料改性和飞秒激光双光子聚合技术制备了位相光栅和达曼光栅等微光学元件。
ZnO thin films can be used to fabricate transparency electrode, piezoresistor, cell battery window, surface acoustic wave device, gas sensor and light-emitting diode etc.
它可以被用来制作透明电极、压敏电阻、太阳能电池窗口、表面声波器件、气体传感器、发光二极管等。
The technology of repressing and re-sintering in powder metallurgy had been used to fabricate a c Cu-C composite materials attaining above 95% of the theoretical density.
采用粉末冶金复压复烧技术制备出高密度的铜碳复合材料，对两种成分铜碳复合材料的显微组织、物理力学性能和耐磨性能进行了对比试验。
The principle of process, characteristic and research status on the several typical microfabrication techniques used to fabricate MEMS devices are given a review in this paper.
文章综述了用于制备MEMS器件的几种典型微细加工技术的工艺原理、特点以及研究现状，并展望了这些微细加工技术的发展前景。
Sulphoaluminate cement as matrix and niobium lithium zirconate titanate as functional part were used to fabricate cement-based piezoelectric composites by compressing technique.
以硫铝酸盐水泥为基体，以铌锂锆钛酸铅为功能体，用压制成型法制备了水泥基压电复合材料。
At first, the character and excellence of carbon nano-tubes (CNTs) are introduced, and the superiority of CNTs is discussed when it is used to fabricate mental matrix composite.
首先介绍了碳纳米管的性质和优点，并讨论了将其应用于制备金属基复合材料方面的优势。
The process is compatible to the existing double poly-silicon self-aligned NPN transistor process, which can be used to fabricate high-performance complementary bipolar circuits.
该工艺与已有的双层多晶硅自对准NPN晶体管工艺相兼容，可用于制造高性能的互补双极电路。
Triple resist technology which can pattern submicron patterns has been developed and used to fabricate submicron IC's successfully depending upon the native lithography equipment.
在现有国产光刻设备的基础上，研制成功了能够复印出亚微米图形的三层胶工艺，并用于制作亚微米电路。
The silicon brass was used to fabricate the covers of cooler in order to satisfy the requirements of resistant sea water corrosion, high heat conductivity and enduring water pressure.
为了满足耐海水腐蚀、高导热率和承压能力要求，冷却器盖均采用硅黄铜制造。
When guided mode resonance occurs, the incident wave parameters and grating parameters are very sensitive. It has a narrow-band effect and can be used to fabricate narrow-band filters.
导模共振对入射波参数和光栅参数极为敏感，具有窄带效应，可用来制作窄带滤波片。
It can be used to fabricate display devices, high frequency filters, emitting diode, lasers and high-speed optical switch. Therefore, it has great USES in both civil and military fields.
它可用与制作发光显示器件、高频滤波器、发光二极管、激光器、高速光开关等器件，在民用及军事领域都有着重要的用途。
In present work, (100) oriented CVD diamond films with different quality obtained by a hot-filament chemical vapor deposition (HFCVD) technique were used to fabricate radiation detectors.
本工作利用热丝化学气相沉积(HFCVD)法获得了(100)取向不同质量的金刚石薄膜，并制备了CVD金刚石辐射探测器。
The analysis of the quality of the bumps fabricated by using these two methods shows that the improved evaporation plus lithography method can be used to fabricate bumps with high quality.
并对两种制备方法做了比较，在分析了制作的凸点的质量后，认为经过改进的蒸发结合光刻法可以制作高质量的阵列凸点。
The analysis of the quality of the bumps fabricated by using these two methods shows that the improved evaporation plus lithography method can be used to fabricate bumps with high quality.
并对两种制备方法做了比较，在分析了制作的凸点的质量后，认为经过改进的蒸发结合光刻法可以制作高质量的阵列凸点。
应用推荐