Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
Working state of a screw pump rod-line is analyzed using Finite element analysis method during broken working station, and three kinds of possible mechanical models are set up.
如何降低螺杆泵抽油杆的应力水平，提高工作寿命是石油开采设备研究中一个急需解决的力学问题。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
By using multilevel substructure analysis and finite element displacement method, this system is suitable for various linear static analysis of aeronautical structures.
这一系统采用多级子结构分析技术，可以适应各种类型航空结构的线性静力分析。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
Using this method engineers are able to estimate the errors of structural natural frequencies caused by random structural parameters in finite element analysis.
用有限元方法分析结构固有频率时，利用这个方法能正确估计由于结构参数的随机性而产生的误差。
Using a spatial composite finite element method, combining three-dimensional solid element and bar element, the mechanical analysis of a two-span curved PC continuous box girder bridge is conducted.
采用三维实体单元和杆单元相结合的空间组合有限元方法，对一座两跨曲线预应力混凝土箱形连续梁桥进行空间受力分析。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
Using the synthetic method of both finite element and modal analysis searches after a basic way of dynamic Safety design.
采用有限元数值模型与实验模态分析相结合的方法，寻求动力安全设计的基本方法。
In this paper, the distribution of stress and displacement of the special arc triangle components is solved by using the Angle division iteration method of finite element analysis.
采用角度细分逐次迭代的有限元分析方法解决了特殊圆弧三角形部件应力和位移分布问题。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
The satisfactory results are obtained by using concrete calculative examples, A new method is provided to carry out finite element stress analysis for different modulus material.
经过实例分析计算，获得了满意的结果。为对这类材料的结构进行有限元应力分析提供了一种新方法。
The frame of a new style motorcycle named Sport Recreation Vehicle (SRV) was researched. Using the finite element mode analysis method, the vibration mode of motorcycle frame was analyzed.
以一新型运动型多功能休闲摩托车车架为研究对象，采用有限元模态分析的方法，对车架振动模态进行了分析。
The natural frequency of the gas column in simple pipelines was solved using the finite element analysis method. The result agreed with that derived with transportation matrix method.
采用有限元分析方法，对简单管道气柱的固有频率进行求解，其结果与用传递矩阵法求得的结果是一致的。
Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.
采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。
Using the method of mode analysis, the author analyses the hookup on the way of finite element, and gives the dynamic characteristic of hookup.
利用模态分析的方法，对悬挂装置进行有限元动力分析，得到了悬挂装置的动态特性。
In this paper, the three dimensional elastoplastic analysis of a group pile soil interaction system is made by using the finite prism element method.
应用有限棱柱单元法对群桩与土相互作用系统进行了三维弹塑性分析，并以无限棱柱元模拟半无限空间地基土的边界条件。
In the analysis, the finite element method and other simplified methods are compared using different models of lateral soil stiffness.
采用不同桩侧土抗力与桩身位移关系的模式，以有限单元法进行分析；
The computer simulation procedure is the key to analyzing the mechanical behaviors of the continuous casting segment tower structure using threedimensional finite element analysis method.
应用三维弹性有限元方法对连铸机扇形段框架体进行分析计算的关键在于结构计算机模拟的可能性和可行性。
However, researching on the process of CWR of hollow shaft parts is mainly to take use of experiments, even using finite element method is really few and scattered without systemic analysis.
人们对空心轴类件楔横轧过程的研究大多采用实验的方法，即使采用有限元理论也是非常零碎的，并未系统地研究空心轴类件的楔横轧过程。
In the numerical analysis of axially symmetry electromagnetic field, the finite element method using ring unit with rectangular cross-section has more advantages than other methods.
在具有轴对称特性电磁场的数值分析中，用矩形截面环单元分析具有比其他单元更多的优点。
Additionally, optimization in structure design of vane MRF damper is completed by using the method of magnetic field finite element analysis, which will effectively enhance performance of damper.
采用磁场有限元分析的方法对叶片式MRF减振器的结构设计进行优化，可以有效提高减振器的性能。
According to the finite element analysis of heat conduction with phase-change by using the enthalpy, an effective numerical method to eliminate the solution of iteration is presented.
通过对采用热焓处理相变导热问题的有限元分析，提出了消除迭代求解的一种有效算法。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
In this paper, facing the convergent problem of plastic forming using large incremental step, we deduced the iterative formula used in analysis of elastic-plastic plate forming finite element method.
此文针对塑性成形有限元分析大增量加载的收敛性困难，推导了用于板料成形弹塑性有限元分析的牛顿一致迭代公式。
This paper introduces a numerical analysis of semi-conductor devices by using the finite-element method combining with the coupled approach and the design of a corresponding modelling program.
本文采用有限元分析与耦合法相结合的方法对半导体器件进行数值分析，设计了相应的模拟程序；
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
应用推荐