Physical insight is valuable in using the finite element method.
在利用有限方法时，物理上的观点是有价值的。
This paper studies the stability of arch abutment by using the finite element method.
本文采用有限元法，研究了拱坝坝肩稳定问题。
Using the finite element method, they finally obtain the displacement and stress of nodal points.
用有限元法解出最终结点位移和应力。
In this paper, using the finite element method, we discuss the two-grid methods for two simplified models.
本文针对二维三温辐射热传导方程的两种简化模型的有限元方程，讨论了两层网格方法。
In this paper, we give an analysis for friction-free interference fit bolt using the finite element method.
本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。
The main magnetic field of Magnetic Resonace Imaging( MRI)device is simulated by using the finite element method.
采取了二维有限元法模拟核磁共振成像（MRI）装置的主磁场。
In this paper, we performed modelling of DC resistivity sounding in tunnel using the finite element method (FEM).
本文用有限单元法对坑道内的直流电阻率测深进行数值模拟计算。
The accuracy of the functional is key to computing the electromagnetic field using the finite element method (FEM).
在电磁场有限元分析中，使用准确的微分算法计算场量是提高计算效果的关键。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Based on cutting and vibrating theories, the dynamic behavior of micro drill is studied by using the finite element method.
基于切削和振动理论，利用有限元技术对微细钻头振动钻入动力学特性进行了深入地研究。
Using the finite element method to analyze the mixing chamber, the temperature distribution as well as the change situation.
利用有限元法对混炼过程中密炼室、胶料的温度分布以及变化情况进行了分析。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
The experimental results were used to calculate material properties, using the finite element method combined with optimization techniques.
该方法根据实测的客观物理量集成运用有限元方法和优化技术来测算材料的弹性参数。
Using the finite element method, the dynamic buckling of a bar with finite initial imperfection under axial impact is analyzed in this paper.
本文用有限元方法分析了一定初缺陷杆受轴向冲击的弹塑性动态屈曲。
The infection cauused by crowd to the transmission characters in trapezium tunnel is studied in this paper by using the finite element method.
本文用有限元方法研究了人群对梯形隧道中电磁波传输特性的影响。
A static analysis of the ribbed shell of revolution made of composite materials by using the finite element method is presented in this paper.
本文用有限元法研究了加肋和复合材料弹性旋转薄壳的静力问题。
This paper discusses the method and skills applied on the microcomputer by using the finite element method to resolve some technical problems.
本文研究微型计算机上进行中小型有限元法求解的方法。
A computer model for the mechanical response of steel bridge deck surfacing under wheel loading is established by using the finite element method.
采用有限元方法建立在车载作用下钢桥面铺装层的力学响应计算模型。
A typical problem of a jointed rock slope has been analyzed and factors of safety against collapse have been computed using the Finite Element Method.
文中用有限元法分析了一个节理岩石边坡的典型问题，并计算出其抗破坏的安全因子。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律；
A modal analysis using the finite element method is carried out for a crankshaft workpiece system. Six lowest order modal 'parameters have been obtained.
本文用有限元方法对曲轴工件系统进行了模态分析，求出了前六阶模态参数。
The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.
使用有限元法计算穿孔管消声器的传递损失，并与实验测量结果进行了比较，二者吻合良好。
The study of the effectiveness of the dynamic vibration absorber in reducing harmonic response of the ship hull girder using the finite element method is presented.
采用有限元法研究了动力吸振器减小船体梁结构谐波振动响应的有效性。
According to the measured results, a reasonable boundary condition can be set up and then the field distribution can be calculated by using the finite element method.
按测量结果，确定了一个合理的边界条件，用有限元法模拟计算了沿轴场分布。
The Maxwell stress between magnet and keeper was integral analyzed using the finite element method, and the attractive force between magnetic attachments was obtained.
通过有限元法积分作用于闭路磁体与衔铁之间的麦克斯韦应力，算得磁性附着体的固位力。
The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.
本文利用有限元数值计算方法，系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。
By using the Finite Element Method (FEM), the nonlinear thermal vibration characteristics of composite laminated plates under linear temperature field were investigated.
采用有限元方法研究复合材料层合板结构在线性温度场作用下非线性热振动特性。
Normal modes in the pole and important characteristic parameters such as resonance frequency and position of the displacement node are obtained using the finite element method.
并应用有限元法对变幅杆进行了模态分析，得到了共振频率和位移节点等重要参数。
Normal modes in the pole and important characteristic parameters such as resonance frequency and position of the displacement node are obtained using the finite element method.
并应用有限元法对变幅杆进行了模态分析，得到了共振频率和位移节点等重要参数。
应用推荐