Water based or solvent free UV curing wetting agent.
水性系统或无溶剂紫外线硬化系统使用之润湿剂。
Water based or solvent free UV curing flow and leveling agent.
水性系统或无溶剂紫外线硬化系统使用之流平剂。
Water based or solvent free UV curing anti-foaming and defoamer.
水性系统或无溶剂紫外线硬化系统使用之抑泡剂、消泡剂。
This article has studied the photoinitiators for white UV curing powder coatings.
研究了白色体系UV固化粉末涂料用的光引发剂。
The basic structure and functions of the UV curing ink are introduced in this paper.
文章扼要介绍了紫外光固化油墨的基本组成及其功能。
Therefore, you should improve on UV curing speed or select efficient UV curing light source.
因此，应提高UV上光油的固化速度或选择高效的紫外固化光源。
Free radical-cationic hybrid UV curing system is a important one in the hybrid polymerization system.
混杂光固化体系中比较重要的是自由基-阳离子混杂光固化体系。
While liquid core fiber has fewer varieties, it has found wide uses, especially in the field of UV curing.
虽然液芯光纤的品种较少，但用途比较广，特别是在紫外光固化行业中得到大量应用。
Therefore, formulation system of UV curing coatings can form protective hard film on polycarbonate substrate.
研究了可在聚碳酸酯基材上形成保护硬涂层的UV涂料配方体系。
UV curing of paint, drying of printing pigment, UV oxidation, various chemical reactions, disinfection of water.
油漆的紫外固化，印刷颜料的干燥，紫外氧化，各种化学反应，水的消毒。
Photoinitiator of cationic polymerization is a new type of high efficient photoinitiators used in UV curing applications.
阳离子型光引发剂是一类新型的紫外光固化材料的引发剂。
The influence of oligomers, active diluents and additives on the adhesion of UV curing (coatings) on glass has been studied.
研究了低聚物、活性稀释单体以及助剂对玻璃涂膜附着力的影响。
The application of this oligomer in UV curing coatings for improvement of adhesion on metals and its fire retardancy are reviewed.
综述了此低聚物在UV光固化涂料中提高金属表面附着力和具有阻燃特点的应用。
The influence of matting agents, formulation, and application and curing schedule on gloss of 100% UV curing coatings is discussed.
本文讨论了消光剂、配方组成、施工和固化条件等对100%UV固化涂料光泽的影响。
The development of oligomer, active diluent(monomer), photoinitiator as major components of UV curing coatings system were described.
介绍了光固化涂料体系几种重要组分：低聚物、活性稀释剂（单体）、光引发剂的研究进展。
The machine integrates automatic feeding devise, flame treatment, automatic direction detective devise and uv curing system and so on.
整机集成同步自动上料机械手，表面火焰处理，自动升降印刷及紫外线固化诸多结构与功能。
By ir spectra, the UV curing kinetics were also studied. With the product, after UV light irradiation, paint obtained has perfect characteristic.
同时将产物用于紫外光固化涂料配方，并用动态红外光谱法观察了产物的紫外光固化行为。
Epoxy acrylate (EA) resin is an important photosensitive resin, in which bisphenolic epoxide was most widely used in the field of UV curing coating.
环氧丙烯酸（EA）树脂在辐射固化领域中是一种重要的感光树脂，其中双酚A型环氧树脂的应用最为广泛。
At the end of this experiment, the composition of UV curing coatings used for special optical cable with good performance was established ultimately.
最终制得了性能良好，并得到用户肯定的特种光缆用UV固化涂料。
Application of UV curing technology in automotive refinishes, top finishes, paints for plastic parts of automobiles and powder coatings is introduced.
介绍了光固化在汽车修补漆，面漆，汽车塑料部件涂料及粉末涂料方面的应用，对光固化设备及技术也进行了讨论。
The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper.
在常温下涂布后直接紫外光交联固化，考察了光引发剂、交联剂、光固化时间等因素对UV固化压敏胶综合性能的影响。
According to the different papers, infrared drying or UV curing was selected, and then the cooling systems made the paper cool to improve the drying effect.
阐述全能纸张烘道系统主要组成，根据烘干物料的不同，选择红外线干燥或紫外线固化，烘干后经运风降温冷却，提高纸张的干燥效果。
The title UV curing coatings is prepared based on epoxy acrylate, reactive diluents and photoinitiator. The main raw materials and cured film are tested with TGA.
以环氧丙烯酸酯、活性稀释单体、光引发剂等为原料，制备UV固化涂层，对主要原料及固化后的涂层进行了热失质量分析。
Hybrid UV curing system includes free radical cationic hybrid UV curing system, free radical condensation polymerization system and free radical free radical system.
混杂光固化体系包括自由基阳离子混杂光固化体系、自由基缩聚混杂体系和自由基自由基混杂体系等。
The UV Curing polyurethane (PUA) was blended with chlorinated polyvinyl chloride (CPVC) for Pervaporation membranes, which were used to separate ethanol water mixture.
将聚氨酯丙烯酸酯齐聚物(PUA)与过氯乙烯(CPVC)共混制成渗透汽化膜并用来分离乙醇水溶液。
In this paper, the development of optical fiber ribbon in the world, the structure of the optical fiber ribbon and the parameters of UV curing matrix material are introduced.
本文介绍了光纤并带树脂的国内外研究现状，详细阐述了光纤带结构及紫外光固化光纤并带树脂的性能参数。
UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time, chain transfer agent NDM was added for controlled reaction rate.
采用本体聚合方法将丙烯酸酯单体的混合物实施热聚合制备预聚体，采用核-壳聚合法的单体投料方式同时加入链转移剂十二烷基硫酵来控制反应进程。
UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time, chain transfer agent NDM was added for controlled reaction rate.
采用本体聚合方法将丙烯酸酯单体的混合物实施热聚合制备预聚体，采用核-壳聚合法的单体投料方式同时加入链转移剂十二烷基硫酵来控制反应进程。
应用推荐