The metallography samples fabricated by the vacuum impregnation of resin are introduced.
详细介绍了真空浸渍树脂法制备金相样品的制备过程。
It is adaptable to vacuum plating. Gaseous drying of kerosene vacuum impregnation, vacuum drying. Dehydration, vacuum metallurgy and so on.
所以它可用以真空镀膜、煤油气相干燥真空浸渍、真空干燥以及脱水、真空冶金等。
The product is applied with a vacuum impregnation process that removes air from the pores and then fills the pores with this liquid sealant.
该产品利用真空方式抽除孔隙中的空气并将密封液注入到材料的微小空隙中固化后将其密封。
The current situation and characteristic of vacuum impregnation process and equipment in refractory industry in China are analyzed and introduced.
对我国耐火材料行业的真空浸渍工艺及设备现状进行了分析，介绍了国产化真空油浸装备及工艺特点。
A key technological process to power capacitor manufacture is vacuum impregnation, and the quality of impregnation can only be guaranteed by using good vacuum impregnating equipment.
电力电容器真浸工艺是电容器制造技术中的关键工艺，优良的真浸设备是合理真空工艺制定的基础。
The basic principle of vacuum impregnation technique, material to be used, technological process are briefly introduced. The illustrative diagram of vacuum impregnation has been given.
本文概要介绍了真空浸渗新工艺的原理、使用原料和工艺流程，给出了真空渗补的原理图。
Widely used in food, textile, pharmaceutical and chemical industries vacuum evaporation, condensation and impregnation, drying in the process.
广泛用于食品、纺织、医药、化工等行业的真空蒸发、浓缩、浸渍、干燥等工艺过程中。
A part has many voids that can be impregnated. One method is to use an oil bath. Another method uses vacuum first, then impregnation.
零件有许多可供填充的空间。一种方法是采用油浴。另一种方法是先抽真空然后再充满。
At present, the vacuum pressure impregnation technology is a new process in electrical trade.
真空压力浸渍是电工行业中目前应用的新技术、新工艺。
In th is paper, the equipment structure, the process of vacuum hot air drying for oil impregnation equipment are given, the relation between the vacuum ho.
本文详尽的叙述了该设备的构成、真空热风干燥浸油工艺以及讨论了真空热风干燥与保温之间的关系。
Low pit aspiration ratio and cracks of some bordered pits are the main reasons for increasing liquid impregnation after radio-frequency vacuum drying treatment.
具缘纹孔的闭塞率较低以及部分具缘纹孔周缘破裂是高频真空干燥后木材浸注性提高的主要原因。
The method of impregnation and penetrating agents and the penetrating process were described in the paper. The composite structure of device that vacuum pressure penetrating were also introduced.
本文阐述了浸渗技术的浸渗方法、常用的浸渗剂和浸渗工艺，介绍了真空压力浸渗装置的组成和主要结构。
The paper expounds the arrangement, technological process, characteristic of vacuum system for high pressure impregnation as well as the affection on impregnation qUality.
综述了二种高压浸渍真空系统的配置、工艺过程、特点及其对浸渍效果的影响。
Application of casting impregnation technique, vacuum pressure impregnation technological process and operational attentions as well as design and calculation of such equipment have been described.
介绍了铸件浸渗技术的应用、真空加压浸渗的工艺过程及操作注意事项，同时还介绍了真空加压浸渗设备主要部件的设计与计算。
The process and mechanism of vacuum chemical impregnation were studied.
对烧结式镍基板的真空化学浸渍过程及机理进行了研究。
Widely used in food, textile, medicine, chemical industry, vacuum evaporation, concentration, impregnation, drying and other processes.
广泛用于食品、纺织、医药、化工等行业的真空蒸发、浓缩、浸渍、干燥等工艺过程中。
The final major step in fabrication of large superconducting magnet coils is vacuum pressure impregnation (VPI).
大型低温超导磁体线圈制造的最后关键的工艺是真空压力浸渍（VPI）。
A vacuum high pressure filling equipment in which a filling rate can be increased and the impregnation time can be shortened when a porous workpiece is immersed in filling liquid.
本发明提出一种在使有孔被加工品浸渍在填充液体中时可以提高填充率以及缩短含浸时间的真空高压填充装置。
The WPG was influenced significantly by impregnation time, pressure, vacuum-time and the interaction of time and pressure.
浸注时间、浸注压力、抽真空时间以及浸注时间与浸注压力的交互作用的影响都极显著。
This paper introduces the fundamental and characteristics of the Vacuum Pressure Impregnation (VPI).
本文介绍了真空压力浸渍的基本原理及其特点。
This paper introduces the fundamental and characteristics of the Vacuum Pressure Impregnation (VPI).
本文介绍了真空压力浸渍的基本原理及其特点。
应用推荐