Clip cable to cable guide at valve cover.
把电缆夹进阀盖上的电缆导槽。
Install relief valve cover nut and tighten.
安装安全阀阀盖螺母，并加以紧固。
A water valve cover many products and ribs, played a clog.
阀盖上有很多个进水品和加强筋，起到了不易堵塞。
Tight all closures and put the valve cover door on position before shipment.
运输前拧紧所有密封件，盖好阀门挡板。
Bite valve cover protects from dirt and debris, includes a bite valve inside.
咬合阀盖保护阀远离灰尘和碎片，包括内置咬气门芯。
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
With the valve cover tilted up you can see the single overhead CAM shaft and valves.
与阀盖倾斜了，您可以看到单一的架空凸轮轴和阀门。
Regulation in a number of institutions under the valve cover as part of the body is not separated.
在一些调节机构中下阀盖作为阀体的一部分，并不分离。
In some regulatory agencies as the lower body Gate Valves part of the valve cover, not separation.
在一些调节机构中下阀盖作为阀体的一部分，并不分离。
Diaphragm valve body flow smoothly, cutting components for the elastic diaphragm, valve cover stuffing.
隔膜阀体流通平滑、节流元件为弹性隔膜阀，阀盖上无填料函。
Using an appropriate sized wrench, loosen the check valve cover. Unscrew the check valve cover and lift off.
采用大小适中的扳手，松开止回阀盖。旋下止回阀盖螺丝并拿起。
Using an appropriate sized wrench, loosen the check valve cover. Unscrew the check valve cover and lift it off.
采用尺寸大小适中的扳手松开止回阀阀盖。宁松止回阀阀盖并将其取出来。
And a limiting retaining mechanism is arranged between the outer cover and the valve cover, which achieves multiple guarding against theft.
并且外罩和阀盖之间设置有限位止退机构，实现多重防盗。
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固，应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
Flap valve cover seals are required when there is carbide reactor welding, sealing surface with thread sealing, to ensure the reliability of sealing and prevents scarring.
阀瓣密封根据需要时封面均堆焊接有硬质合金，密封面采用线密封，保证密封的可靠性，并可防止结疤。
Working principle: when the internal piping and tank vacuum, atmospheric pressure will be the valve cover, air enters the system, balance the system pressure, eliminate the effect of vacuum.
工作原理：当管道和水箱内部形成真空时，大气压便会顶开阀盖，大气进入系统内部，平衡系统压力，消除真空影响。
The utility model can prevent the discharge-orifice steel columns of the upper draining valve cover from cracking, increase the service life of oil-well pumps, and lower oil-production cost.
本实用新型可防止抽油泵在采油过程中上排出阀罩出油孔筋柱裂断，提高抽油泵的使用寿命，降低采油成本。
In the process of oil production, frequent dropout of pump's valve cover may not only increase work load of production operation and cost of production, but also heavily influence oil output.
石油开采过程中，抽油泵凡尔罩故障性断脱的频繁发生，不仅加大了采油作业工作量，增加了采油成本，同时也严重影响了原油产量。
As a scale cover on the water regulating valve cover is marked with scales, by matching with a standard rod, the regulated position of the water regulating valve cover at each time can be known.
调水阀盖上的刻度盖标有刻度，配合标准杆，就可以知道每次调水阀盖所调的位置。
Fluid design, in the cover of the battery set a one-way valve.
液设计，在电池的上盖中设置了一个单向的安全阀。
The box cover is provided with a temperature control system, in the constant temperature box rear drain valve and an external power supply socket.
箱盖上有控温系统，在恒温箱的后部是排水阀及外接电源插座。
The relief valve can be cast and pump body and pump cover, also can separate assembly.
安全阀可以与泵体或泵盖铸成一体，也可以单独装配。
Remove the bolts and cover, realign the diaphragm assembly, and place the cover back on the relief valve body.
拆卸螺栓和阀盖，重新校准隔膜总成，并将阀盖放回到安全阀阀体上。
Imported from Italian COSTER valve with big cover, flabelliform fog-spray, good handle with no jam, nozzle P, D, R is commutative, meeting with the different testing requirements.
引进原装意大利COSTER大盖嘴阀门，雾状呈扇形、不堵、手感好，P、D、R喷嘴可互换，以达到不同检测喷雾要求。
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass.
阀体、阀盖、附属件和控制止回阀均符合美国材料试验协会ASTM的半红铜合金分类标准。
The installation 1, Qudiao flange end of the Flange-connection fixed ball valve protective cover on both sides, in the valve fully open state to wash clean.
安装1、取掉法兰端两边的保护盖，在阀完全打开的状态下进行冲洗清洁。
To improve the response speed of on-off solenoid valve of big flux, detailed analysis on poppet valve is given and an on-off solenoid valve with movement of both spool and cover is designed.
通过对锥阀特性的分析，设计了一种阀芯、阀套同时运动的芯套双动高速开关阀，该阀增大了高速开关阀的开口度，提高了响应速度和流量。
Examine the pressure meter tube and valve, pressure meter cover glass, if it is dirty, clean it with diluted hydrochloric acid.
检查压力表管道及阀门是否畅通，灵活，压力表面玻璃如有污，可用稀盐酸拭净。
Neoprene tube cover, plug-n-play reservoir attachment, bite valve with cover.
氯丁橡胶管套，即插即用存储附件，咬阀盖。
Reattach the relief valve hose to the elbow in the bottom flange cover.
重新将安全阀软管接到底部法兰盖内的弯头上。
应用推荐