Why straight trip regulating valve stem smaller?
为什么直行程调节阀阀杆较细？
The connecting rod may drive a valve stem directly.
连杆可以直接带动阀门的把柄。
Clean exposed portion of valve stem (Do not scratch).
清洗阀杆的外露部分(不要划伤)。
Clean exposed portion of valve stem (Do not scratch).
清洗阀杆的外露部分(不要擦伤)。
These diaphragms prevent leakage along the valve stem.
这些横膈膜防止了沿着阀杆的泄漏。
B lifting, the rope not tied hand wheel or valve stem.
b起吊时，绳子不要系在手轮或阀杆上。
The threads on the lower valve stem are in the wetted gas stream.
下阀杆上的螺纹是处在潮湿气流中的。
Replaceable hose filter and valve stem seals for field reliability.
可更换软管过滤器和阀门阀杆密封，使得现场应用可靠行更高。
Align adapter bushing or gear operator (3) bore with valve stem (5).
用阀门的阀杆(5)对准适配器衬套或持论操作机构(3)镗孔。
A spring on the valve stem tends to hold the valve on its seat (closed).
气门杆上的弹簧使气门保持在气门座上(关闭状态)。
The inaction ways of the hot extrusion die of the valve stem have been analyzed.
叙述了气门顶杆热挤压模失效形式。
The downward-moving side of the rocker arm pushes on the valve stem to open the valve.
摇臂向下移动的那一边推动气门杆以打开气门。
Imports of cut-off valve stem and valve seat sealing surface perpendicular to the axis.
进口截止阀的阀杆轴线与阀座密封面垂直。
The bicycle wheel includes an air valve stem and a magnet mounted to the air valve stem.
自行车车轮包括气阀杆和安装于气阀杆上的磁铁。
Slight tapping with a mallet may be required, but do not change the valve stem position.
如果需要，用木槌轻轻敲打，但是不要改变阀杆位置。
Position by the valve stem threads are divided into clear and dark bar bar gate valve two...
按阀杆的螺纹位置划分，可分为明杆闸阀和暗杆闸阀两种。
Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.
松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。
The valve stem with its grooved rings and positioning sleeve indicates the throttled position of the valve.
阀杆及其沟槽环和定位套筒显示阀门的节流位置。
If the steam needs quick deflating, the deflation valve stem can be pressed to deflate the steam thoroughly.
如急于放气可压住放气阀杆把蒸汽放净。
It is mainly consisted of body, connecting pipe cushion container, piston chamber, disc, valve stem and other parts.
主要由阀体、连接管、缓冲容器、活塞室、阀瓣、阀杆等零件组件。
A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem).
可用轮胎工具或扁平的撬棒把轮缘的一端从轮辋辋圈上撬起。
Discussing several ordinary processing technologies of valve seat ring and valve stem guide hole of cylinder head now.
对目前气缸盖气门座圈和导管孔的几种一般加工工艺进行讨论。
The NIBCO valve figure number and size must also be furnished and specify valve stem coupling for use with floor stand.
另外还要提供尼伯科阀门型号和尺寸，并说明所要采用的阀门阀杆与地轴架的连接装置。
Analyzing the many factors of affecting the processing precision of valve seat ring and valve stem guide hole of cylinder head.
对影响气缸盖气门座圈和气门导管孔的加工精度的诸多因素进行分析。
Valve rod with valve lids between bring fall airproof structure, Convenients for valve bring press replacing valve stem packing.
阀杆与阀盖之间带倒密封结构，便于阀门带压更换阀杆填料。
A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。
To adopt lower-installed type valve stem and set up reversed sealing structure can ensure reliable sealing at the position of the stuffing.
采用下装式阀捍，设置倒密封结构，能确保填料处可靠密封。
Stem material, and strive to stainless steel stem (2cr13), large diameter valves also should be embedded in the package of stainless steel valve stem.
阀杆材质，力求不锈钢阀杆(2cr13)，大口径阀门也应是不锈钢嵌包的阀杆。
The valve stem and sealing surfaces are completely protected from dirt and corrosion by the stem cap, whether the valve is in an open or closed position.
不管是在阀门开启位置，还是关闭位置，阀杆和密封面有阀杆盖帽的保护，能防止污物入内，防止腐蚀。
The valve stem and sealing surfaces are completely protected from dirt and corrosion by the stem cap, whether the valve is in an open or closed position.
不管是在阀门开启位置，还是关闭位置，阀杆和密封面有阀杆盖帽的保护，能防止污物入内，防止腐蚀。
应用推荐