Study showed that angle deformation of T joint is changed along the welded seam length.
研究表明，T形接头的角变形沿焊缝长度方向是变化的。
This welded seam is found an obvious air hole and an unqualified undercut with macroscopic check.
这个焊口以宏观检查发现明显的气孔和超长的咬边。
But high energy beam welding makes the welded seam become braze-welding when adding fill material.
但加填充材料对铍进行高能束焊接可使焊缝形成钎接焊。
Must be Identified with the Tank that it belong, included the Slop Tanks, in proper manner, like welded seam or similar.
所有的人孔盖上必须用电焊或者类似方式做好舱名标识。
The experiments show that the welded seam is good and the metallurgical joint was achieved without melting the shell body.
试验表明，焊缝成型良好，在弹体不发生熔化的前提下实现了冶金结合。
In order to retain ample strength at the welded seam, the tube wall thickness is increased making the overall frame heavier.
为了保留足够的实力在焊接缝，管壁厚度增加，使整体帧重。
How to increase the welded seam impacting toughness of ERW pipe is a great problem among the technology of pipe manufacture.
如何提高erw钢管焊缝冲击韧性是制管技术中的一大难题。
In this paper, the influence of the draw rib setting on the welded seam movement for the tailor-welded blanks (TWBs) was analyzed.
分析了拉深筋的设置对激光拼焊板成型时焊缝移动的影响。
The reasonable widths of backup strip are experimented with the strength factor of the welded seam for a particular kind of PVC/PES.
PES背贴焊接缝合试验，得到了应力-应变曲线、背贴条宽度、焊接缝合强度系数；
Introduce welded seam specification, standards performed, inspectation items and acceptable index for welding of body and joint pipe.
介绍了阀体与接管焊接的焊缝技术要求、执行标准、检验内容及合格指标。
The article analyzes that all factors effect impacting toughness of welded seam of ERW pipe on the basis of mass produce and practice.
在大量生产实践的基础上分析了影响ERW直缝电阻焊钢管焊缝冲击韧性的各种因素。
Welding temperature is the most important factor which influences the quality of the welded seam in the process of producing ERW pipe.
在高频直缝焊管生产过程中，焊接温度是影响焊缝质量的首要因素。
The technology of intelligent flaw detection is adopted in the system, realizes the inspections of high accurate welded seam automatic tracking.
采用智能化探伤技术，实现了高精度、快速焊缝自动跟踪的检测。
This article explained the correct application of the theory of strength through using the commonly used bevelled halving welded seam as an example.
以工程中常用的斜对接焊缝的研究为例，说明了力学强度理论的正确应用方法。
It analyses the existed problem during design and construction and puts forward Suggestions to the welded seam inspection and acceptance criteria...
对于国内目前采用的焊缝探伤及验收标准，分析了设计和施工中存在的问题，并提出了一些建议。
The striation spacing in heat affect zone and welded seam samples was wider than that in matrix sample, this shows that fatigue crack propagation...
焊缝区和热影响区试样的辉纹间距较基体区的大，说明裂纹扩展速率快，焊缝和热影响区的抗裂纹扩展性较基体差。
The fatigue analysis about the welded seam region where stress is concentrated is dis- cussed by a experience formula and the related measure is put f…
运用经验公式对应力集中的焊缝周围进行疲劳分析，提出相关措施。
Additionally, there was great interest in our premier seam tape product line with which allows users to reinforce welded seams or waterproof sewn seams.
过去三年里，由于其在设计和生产上的优越性，Sewfree在制衣上的应用非常成功，而且，接缝胶带生产线可以帮用户增强焊接缝或防水缝合缝。
It puts forward welded seam automatic tracking system based on DSP vision sensor and presents the system main hardware block and software design briefly.
提出一种基于DSP(数字信号处理器)的视觉传感器焊缝自动跟踪系统，并对系统主要硬件模块及软件设计做了简要介绍。
This paper introduces the producing and technology characteristics of the square and rectangular double-welded seam pipe. And designing of the pass parameters of the cold-bent channel steel.
介绍了双焊缝方矩形钢管生产技术的特点及冷弯等边槽钢孔型设计参数。
It assays technological parameter and major features of abrasive belt grinding. It also discusses the ways as to the improvement of productivity and quality of wiping out welded seam and polishing.
设计了去焊缝及抛光用的砂带异型涂附磨具及砂带磨削装置，分析了砂带磨削工艺参数和主要特点，讨论了提高去焊缝及抛光加工质量、生产效率的途径。
The large dia. straight seam welded pipes are mainly used to transport oil, natural gas, coal pulp and other liquids.
大直径直缝焊管主要用于石油、天然气、水煤浆及各种液体的管道输送。
Welding and allied processes. resistance spot, projection and seam welded lap joints. classification of defects with explanatory comments.
焊接和有关技术。电阻点焊凸焊或缝焊搭接接头。带解释的缺陷分类。
The effects of welding force and welding electric current on the tensile strength of mash seam welded joints in the interstitial-free (IF) steel have been studied.
研究了焊轮压力和焊接电流对无间隙原子钢(if钢)压平缝焊接头抗拉强度的影响。
This paper describes the production process for plate used for large-calibred straight seam welded pipeline.
介绍了大口径直缝焊接钢管用钢板的生产工艺。
The test results show the band structure distribution has great influence upon the strong toughness of welded pipe seam.
试验结果表明：带状组织的分布对焊缝强韧性影响较大。
Galvanized sheet is readily spot- or seam-welded, but arc gas welding will boil off the zinc coating.
镀锌板上有焊点或焊缝，但是电弧焊会烧掉锌层。
The welding method used was a PC-GMAW process with mixture gases shielding. Central crack for the welded plate was located in the fusion zone between welding seam and heat-affected zone.
焊接方法为脉冲熔化极混合气体保护焊，焊接板的中心裂纹处于焊缝与热影响区之间的熔合区。
It analyses quadratic phase stainless and its metal compound generated from weld seam and HAZ, which affect welded pipe usage property.
分析了双相不锈钢及其焊缝和热影响区中产生的金属间化合物等二次相对焊管使用性能的影响。
It analyses quadratic phase stainless and its metal compound generated from weld seam and HAZ, which affect welded pipe usage property.
分析了双相不锈钢及其焊缝和热影响区中产生的金属间化合物等二次相对焊管使用性能的影响。
应用推荐