It introduces a simple drive circuit, which can improve dynamic performance of welding power source, lower the manufacturing cost and meet the requirement of GB15579.
介绍了一种简单的驱动电路，它能有效改善焊接电源的动态性能，降低产品制造成本，满足GB 15579的安全要求。
It is perfect phase trigger circuit for arc welding power source...
该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
It is perfect phase trigger circuit for arc welding power source of SCR.
该相控触发电路是晶闸管整流弧焊电源的理想触发电路。
A type of switched HF pulse TIG welding power source is introduced in this paper.
本文介绍一种开关式高频脉冲tig焊电源。
A kind of inverter TIG welding power source for thin plates welding is introduced.
介绍一种用于薄板TIG焊的逆变电源。
So research on the Pulsed MIG welding power source becomes more and more important.
因此对脉冲mig焊接电源的研究具有很大的实际意义。
This paper introduces the frame of a welding power source based on Digital Signal Processor(DSP).
介绍了基于数字信号处理器（DSP）控制的焊接电源结构。
The present invention relates to an arc power control method of arc welding power source and its device.
本发明是对弧焊电源(俗称电焊机)的焊接电弧实现等功率或不同功率曲线控制的控制方法及装置。
Inverter spot welding power source is one of important directions in the studies of the resistance-welding field.
逆变式点焊电源是电阻焊领域研究的重要方向之一。
Pulsed arc welding power source by thyristor DC chopper consists of common DC arc welding power source and DC chopper.
采用晶闸管直流斩波器的脉冲弧焊电源是由普通的直流弧焊电源，附加晶闸管直流斩波器组成的。
Compared with traditional control method, a digital control method of soft-switch arc welding power source is put forward.
在与传统的弧焊电源控制比较的基础上，提出了一种软开关弧焊逆变电源的数字控制方案。
The high-power IGBTs are adopted to design the dual inverter arc-welding power source for variable polarity pulse MIG welding.
提出采用大功率IGBT设计变极性脉冲MIG焊双逆变弧焊电源。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
This paper analyses and studies the methods for measuring inductance of the iron core DC reactor of CO_2 arc welding power source.
本文对CO_2焊接电源直流铁芯电抗器电感值的测试方法进行了分析研究，指出现有的方法测试误差较大。
In this topic, a new CO2 arc welding power source is researched which is based on the technology of microcomputer and wave control.
本课题以波控技术为基本指导思想，应用微机技术，对CO_2弧焊电源控制系统加以研究。
In this paper, a digital welding power source based on DSP(digital signal processor) has been developed, which is designed for CO2 welding.
本文以DSP（数字信号处理器）为控制核心研制了一套CO2焊接数字化弧焊电源。
This welding equipment consists of hollow cathode welding torch, vacuum system, welding power source, gas flow control unit and compact control dev...
空心阴极焊接设备由空心阴极焊枪、真空系统、焊接电源、气体流量控制单元、总控制箱组成。
This welding equipment consists of hollow cathode welding torch, vacuum system, welding power source, gas flow control unit and compact control device.
空心阴极焊接设备由空心阴极焊枪、真空系统、焊接电源、气体流量控制单元、总控制箱组成。
This paper introduces inverter technology and USES IGBT as power component to research high performance and high efficiency CO2 arc welding power source.
为了研究高性能、高效率的CO_2焊接电源系统，本文引入了逆变技术，并使用IGBT作为功率器件。
Dynamic process of current is controlled quickly by the first inverter, and arc polarity is controlled by the second inverter of arc welding power source.
弧焊电源一次逆变控制电流快速动态过程，二次逆变控制电弧极性。
The hardware and software of a developed 8098 single-chip microcomputer controlled MOSFET precise spot welding power source have been introduced in the paper.
对所研制的由8098单片机控制的MOSFET精密点焊电源的硬件及软件进行了介绍。
A square-wave AC high-frequency welding power source is composed of the square-wave AC high-frequency generator and DC welding machine controlled by thyristor.
将晶闸管直流焊机与方波交流高频发生装置组合，构成方波交流高频焊接电源。
A new type of underwater welding system is studied, which includes an oscillating wire feed system and a welding power source with staircase external characteristic.
研究了一种新型的水下焊接系统。系统中弧焊电源输出阶梯型的外特性，送丝系统采用脉动送丝方式。
This article introduces a new design plan of soft switch invert welding power source, which can almost get in soft switch state under no-load, short circuit or load.
提出了一种新的软开关逆变弧焊电源的设计方案，该方案基本上可实现空载、短路、燃弧全负载范围内的软开关状态。
This paper collects and analyzes the harmonic signals of the CO2 welding machines main transformer, by which researches the effect of welding power source on the main.
对晶闸管CO2焊接电源焊接过程主变压器一次侧产生的谐波信号进行采集分析，以此研究焊接电源对电网的影响。
The hardware of the system comprises the five sub-systems, i. e. welding power source, arc length controller, welding wire feeder, welding head traveller and detector.
此系统的硬件主要包括五个子系统，即：焊接电源、弧长控制器、送丝机构、焊矩行走机构和检测机构；
The fuzzy controller is applied to the inverter welding power source. The system is introduced briefly, including run principle, form of control system and hardware design.
介绍了模糊控制逆变弧焊电源的基本工作原理，控制系统组成以及硬件实现方案。
A data acquisition system with the MCS-51 single-chip microcomputer control and a software for dynamic behavior detection of arc welding power source is described in this paper.
本文介绍了一种由MCS - 51系列单片机构成的数据采集系统以及用于电焊机动特性的测试软件。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
逆变式弧焊电源是新一代的弧焊电源，其特点是速度快，直流输出电流波纹小，电弧稳定，质量小，体积小，能耗低。
The inverter arc welding power source is the new power source and features high speed, small DC current ripple, stable arc, light weight, small capacity and low power consumption.
逆变式弧焊电源是新一代的弧焊电源，其特点是速度快，直流输出电流波纹小，电弧稳定，质量小，体积小，能耗低。
应用推荐