Stability welding process, welding spatter small.
焊接过程稳定，焊接飞溅小。
It has a low welding spatter and aesthetic formation of weld.
堆焊过程飞溅小，焊缝成型美观。
Equipped with damping device, reduces the welding spatter, and ensures welder's safety.
加装了阻尼装置，减少了焊接飞溅，保证了焊工的安全操作。
When welding spatter measures should be taken to prevent (such as lime brush method etc.).
焊接时应采取防飞溅措施(如刷白灰等方法)。
Paint coating, should take the rust coating parts, weld coating, welding spatter materials, oil, dust and other debris cleared.
油漆涂刷前，应将需涂装部位的铁锈、焊缝药皮、焊接飞溅物、油污、尘土等杂物清理干净。
The spatter rate was used to represent the welding stability by analyzing the relationship between stability and welding spatter.
论证了飞溅与焊接稳定性的关系，提出采用飞溅率表征焊接过程稳定性。
Application of stainless steel after welding (not by steel) flat shovel thoroughly clean slag and spatter.
焊后应用不锈钢(不得采用碳钢)扁铲彻底清理熔渣和飞溅。
According to the characteristic of robotic arc welding inverter, two kinds of electronic reactances are designed to improve the spatter and weld appearance in the process of robotic CO_2 welding.
针对机器人用孤焊逆变器的特点，设计了两种形式的电子电抗器，用于改善机器人CO_2焊接过程的飞溅及焊缝成型问题。
If a stripe-shaped iron core is used in a reactor, spatter of metal can be reduced, and welding quality can be improved.
电抗器采用条形铁芯，可减轻金属飞溅和改善焊接质量。
Quite molten pool, little spatter and no undercut ensure workpiece be in good welding appearance.
焊接熔池平静，飞溅小，不咬边，焊缝成形美观。
To the especially structure and material welding performance of a spaceflight igniter, the key welding problem is the spatter and strike fire phenomenon which is brought by high contact resistance.
针对特殊结构和材料的焊接性能，指出目前的焊接问题主要是存在飞溅和接触电阻过大而带来的“打火”现象；
Stable arc, less spatter and deep penetration can ensure welding quality well.
电弧稳定，飞溅较少和熔透深，可确保焊接质量良好。
CO2 gas shielded arc welding is widely used in production, but the spatter produced in the weld process badly affects the quality of weld.
CO2气体保护焊是广泛应用在生产中的焊接方法，但因为焊接时飞溅过大影响了焊接质量。
Weld spatter consists of particles of metal unintentionally ejected from the molten pool during welding and deposited on the surface of base or weld metal.
焊接溅落包括无意地从熔融池中溅出的金属颗粒并落到了母体金属或焊缝金属的表面。
The experiments showed that the welder was with stable welding process and small spatter and easy to use.
实验结果表明，本文所研制的焊机焊接过程稳定，飞溅小，操作方便。
Optimized control of dynamic and static characteristics, fast response, stable welding current, reduces spatter and distortion, smooth welding surface.
优化动静特性控制，动态特性优良，焊接过程稳定，飞溅少，成形好。
IGBT power modules, 18khz inverter frequency, fast response time, high arc stability, almost spatter-free welding.
采用IGBT模块，逆变频率达18khz，动态响应速度快、稳定性能好、。
IGBT power modules, 18khz inverter frequency, fast response time, high arc stability, almost spatter-free welding.
采用IGBT模块，逆变频率达18khz，动态响应速度快、稳定性能好、。
应用推荐