The recycle flattening roller regulated by worm gear makes operation easy with good precision.
压延辊采用蜗轮调节，操作方便，精度高。
Special worm gear hobs with circular tooth, double pitch and involute etc, can also be ordered.
圆弧齿、双螺距、渐开线等特殊蜗轮滚刀也可以订货。
The way of fuzzy optimized design has been used to design the gear box of worm gear in this paper.
就蜗杆传动减速器设计问题，应用模糊数学方法进行了优化设计。
This proves that the manufacturing accuracy of worm and worm gear is higher, while the manufacturing methods are feasible.
说明蜗杆螺旋槽以及蜗轮的加工精度是较高的，选用的加工方案是可行的。
For the worm gear set, a mathematical model is set up, basic equations are derived, and tooth contact analysis is carried out.
本文对于这种新型传动副，建立了数学模型，推导出了若干基本方程序，并且进行了齿面接触分析。
In order to manufacture planar double-enveloping toroid worm gear with CNC methods, a precise digital model must be constructed.
为了实现平面二次包络环面蜗轮的数控加工，必须对蜗轮进行精确数字化造型。
Compared with a worm gear conventionally designed, the flexible-tooth worm gear can bend and deform largely under the same load.
与常规设计的蜗轮相比，在同样载荷作用下，轮齿可产生较大的弯曲变形。
Existing numerically controlled indexing system, in which the main driving set almost is worm gear, can not work in high accuracy.
现有的数控分度系统，其主传动装置基本都采用蜗杆机构，但是这类系统不能用于高精度的分度定位。
Finally, we studied the worm gear model with installations error used finite element analysis, and acquired mises stress nephogram.
最后，对具有安装误差的蜗轮副模型进行了有限元分析，得到相应的应力云图。
Also this method can be used to optimize the parameters of modified worm gear drive and analyse the contact condition under errors.
本文的方法还可用来分析优化齿面的曲率修正参数，以及误差作用下的齿面接触情况。
GEARMASTER PGP oils are used in high-load industrial gear systems such as spur gears, bevel gears, epicyclical gears and worm gear pairs.
油都用在高负荷工业齿轮系统，如直齿圆柱齿轮，锥齿轮，行星齿轮和蜗轮副。
Because of their ability to reduce friction and wear, they are usually used as the material for making the worm wheel in a worm gear set.
由于具备减摩性和耐磨性的性能，它们通常用来制作涡轮减速器中的涡轮。
The surface of worm gear is formed by the different positions of worm wheel hob generated as machining. So prisms are inevitably produced.
滚削蜗轮时，其齿侧面为滚刀切削刃在一系列不同位置的包络面，因而不可避免地要产生棱面。
When operated by a machine, the two bevel gears disengage from the engaging state, and the worm gear and the worm are engaged for driving;
机动时，两个锥齿轮脱离啮合状态，蜗轮、蜗杆啮合传动；
Based on the vibration measurement and analysis of worm gear reducer, a new monitoring method is put forward for wear of worm and worm wheel.
本文基于蜗杆蜗轮减速器工作中振动信号的测量和分析，提出了一种蜗杆蜗轮减速器磨损状态的振动监测方法。
Analysis of the forming principle of tooth flank of modified type worm gear pair was based on different geometry and spatial engaging theory.
基于微分几何和空间啮合理论，分析了修正型圆环面双包络环面蜗杆副齿面形成原理。
The design of double worm gear, differential gear trains, has been used as a typical design for years in the feed box moving bench of planomiller.
龙门铣床推动工作台的进给箱以往的典型设计是双蜗轮一差动轮系式。
The cooperative design of worm gear over network is realized using ASP components technique, and the 3d worm gear solid image is produced on line.
通过对asp组件技术的运用，实现对蜗杆零件的网络化协同设计，在网上在线生成蜗杆的三维实体。
The evaluation contents and relevant methods are proposed for the manufacturability of plane-generated double enveloping Hourglass worm gear pairs.
提出了平面二次包络环面蜗杆副可制造性评价的内容和方法。
The driving type is manual, worm gear, electric, electric hydraulic, pneumatic, automatic adjusting etc, which satisfies different process requirement.
驱动形式多样，设有手动、蜗轮传动、电动、电液动、气动、自动调节等，充分满足不同工艺的需求。
The wiper motor is a permanent-magnet direct current (DC) one. It is equipped on the front windscreen glass with the mechanical parts of the worm gear.
它采用直流永磁电动机，安装在前档风玻璃上的雨刮器电动机一般与蜗轮蜗杆机械部分做成一体。
The worm gear functions to slow down and increase torque. Its output shafts spur four-bar linkage by which the movement is changed from rotary to swinging.
蜗轮蜗杆机构的作用是减速增扭，其输出轴带动四连杆机构，通过四连杆机构把连续的旋转运动改变为左右摆动的运动。
The decelerator of precision fabrication, with the worm gear pair made of high-quality special alloy, guarantees the machine wear-resisting and ultra quiet.
精密加工制造的减速器，蜗轮副采用高品质的特殊合金，保证整机耐磨损，超静音。
The valve is used with worm gear driving and electric device to form a complete set to realize open-close operation. It is the ideal equipment of adjusting flow.
配用电动装置及蜗轮传动装置，可实现启闭操作，是调节流量的理想设备。
The use of worm gear reducer, not only with self-locking butterfly board so that board butterflies stop at any position on, but also to improve the valve performance.
采用蜗轮减速器，不仅可以使蝶板具有自锁能力，使蝶板停止在任意位置上，还能改善阀门的操作性能。
Joined to the numerical control index head to be allowed to process the machine parts as the gear, the worm gear, and so on, also has the higher processing precision.
配上数控分度头可以加工齿轮、蜗轮等机械零件，且有较高的加工精度。
It analyzes the influence of the grinding wheel wear on geometric size and teeth contact of worm gear, kinematics precision of the quasi-plane double enveloped hourglass one.
分析了砂轮磨损对准平面二次包络环面蜗杆传动的蜗杆几何尺寸以及接触和运动精度的影响。
WILLIAMSON company has provided for floating ball valve with a mounting pad, through which it is easy to fix the actuators, such as worm gear, pneumatic and electric actuators.
威廉姆森公司的浮动球阀均设置了安装驱动装置的支架平台，通过驱动装置支架，可以方便的安装蜗轮蜗杆传动装置、气动装置或电动装置。
WILLIAMSON company has provided for floating ball valve with a mounting pad, through which it is easy to fix the actuators, such as worm gear, pneumatic and electric actuators.
威廉姆森公司的浮动球阀均设置了安装驱动装置的支架平台，通过驱动装置支架，可以方便的安装蜗轮蜗杆传动装置、气动装置或电动装置。
应用推荐