This interface uses a peer-to-peer architecture in which peripherals negotiate bus conflicts to determine which device can best control a data transfer.
这种接口采用点对点架构，外周设备协商解决总线冲突问题，以确定哪个设备控制数据传输最佳。
The method which integrates PCI bus interface and control logic into a FPGA chip improves the integration density and transplantation of system.
该方法将PCI总线接口和控制逻辑集成于一片FPGA中，提高了系统的集成度和可移植性。
Interface board bus plays an important role in industrial measurement and control systems, even influences on system's performance in a certain extent.
接口板总线在工业测量和控制系统中占有重要的地位，在一定程度上影响着系统的性能。
The batch controller also has a standard interface of RS-485 bus, preferably achieved the network design of the batch control system.
该配料控制器还配有标准的RS—485总线接口，较好地实现了配料控制系统的网络化设计。
This paper is based on developing the high-speed intelligent control cardabout CAN bus of MSCIS interface system and analog output card.
论文是在研制MSCIS接口系统的基于CAN总线的高速智能控制卡和模拟量输出接口卡的基础上完成的。
CAN-BUS interface adopts protocol control chip SJA1000 plus receiving and sending chip 82c250. Ethernet interface adopts Ethernet controller RTL8019AS as physical transmission media.
CAN总线接口采用协议控制芯片SJA1000，配以收发器82c250。以太网接口采用以太网控制器rtl 8019as作为物理层传输媒介。
Meanwhile, FS9704 has the microprocessor interface, and can connect with the microprocessor through interface bus to control FS9704 action.
同时，FS9704还具有微处理器接口，可以通过接口总线与微处理器进行连接，控制FS9704的动作。
The entire system is composed of computer, PC bus interface card, decode instrument, video switches matrix, audio switches matrix, pan, lens and alarm control etc.
整个系统由微机、PC总线适配卡、解码器、视频切换矩阵、音频切换矩阵、云台镜头和报警控制等部分组成。
We choose USB (Universal Serial Bus) as the communication interface of DSP and the computer which can fulfill up data transfer and the control to DSP.
系统选用USB(通用串行接口)作为和上位机通信的接口，实现处理数据的上传以及上位机对DSP的控制。
The control interface board communicated to computer with USB interface. We designed WDM driver on USB bus which made the computer control the whole system through the USB interface.
控制接口板采用USB接口与主机通信，我们设计了USB总线的WDM驱动程序使主机通过USB控制接口板控制整个系统。
After the PCI bus features, control mechanism, interface specification and interface design pattern is studied, we expatiate the driver specialty in Linux.
以数据库加密装置的PCI接口驱动开发为背景，研究了PCI的总线特点、控制机制、接口规范及接口设计方式。
SERCOS digital servo control system bus interface design and development of high research value and practical value.
数字伺服控制系统SERCOS总线接口的设计开发具有很高的研究价值和实用价值。
The basic configuration of PCI bus is introduced, as well as PCI9052, the core component in the card, which performs the control of PCI interface.
论文中讨论了PCI总线的基本结构，详细介绍了基于PCI总线控制卡的核心器件—PCI接口控制芯片pci9052。
The system utilizes CPLD to realize logical and timing control between DSP and multi-channel ADC. The interface between DSP's HPI and PCI bus is employed to achieve high-speed data transmission.
该系统采用CPLD实现了DSP与多通道adc的逻辑和时序控制，通过DSP的HPI与PCI总线接口设计实现了采集数据的高速传输。
This paper introduces the CAN/LIN bus' application in the light's control module, the design of the CAN/LIN gateway is finished, and the hardware interface circuit and the software idea are given.
详细介绍了CAN/LIN总线技术在灯控模块中的应用，完成了CAN和LIN的网关设计，并给出了CAN/LIN总线的硬件接口电路和软件设计思想。
Providing a way explanting the technology of interface design to USB bus for those who are familiar with ISA cards design and working in industrial measurement and control fields.
从而使熟悉ISA总线扩充卡设计、从事工业测控领域的技术人员能迅速将接口设计技术移植到USB总线上。
The display control card compatible with all kinds of LCD and its bus interface support many kinds of MPU.
该显示控制卡可以控制全类型LCD，并且支持多种微控制器。
CAN bus is introduced as the communication interface for different modules and it supports the multi joints 'real-time control effectively.
采用CAN总线作为模块间的通信接口，有效地支持了多关节实时控制。
And this paper brought forward one kind of design method on CAN BUS network Card Based on USB Interface in the measurement-control network of design.
在测控网络的设计中，提出了一种基于USB接口的CAN总线网络适配器的设计方案。
A boundary scan controller with the USB interface is designed. DSP and 74lvt8980 are adopted to control the boundary scan bus.
采用DSP和边界扫描总线控制芯片74lvt8980设计边界扫描测试控制器。
The data stream and control flow between 1553b bus interface card and its software are also described.
并对15 5 3b总线接口卡与其配套软件之间的数据流和控制流进行了说明。
We put forword one Check-up and control system based on CAN-bus, and introduced its whole structure, hardware collocation, software Collocation, interface-circuit and so on.
针对导弹武器系统模拟测试方案存在的不足，提出了基于现场总线的数字化测试方案，文中从硬件和软件方面给出了惯性测量组合测试节点与 CAN 总线的接口设计。
We put forword one Check-up and control system based on CAN-bus, and introduced its whole structure, hardware collocation, software Collocation, interface-circuit and so on.
针对导弹武器系统模拟测试方案存在的不足，提出了基于现场总线的数字化测试方案，文中从硬件和软件方面给出了惯性测量组合测试节点与 CAN 总线的接口设计。
应用推荐