The clad plate can be provided with grooves on two sides or four sides.
复合板可以是两边或四边带有凹槽。
It is one of editorial units in industry standard at "Explosion clad plate for pressure Vessel".
是行业标准《压力容器用爆炸焊接复合板》编委单位之一。
Method for preparing 1, 4-di (2, 4-diamino phenoxy) benzenoid form polyimide film for flexible copper clad plate.
柔性覆铜板用1,4 -双(2,4 -二氨基苯氧基)苯型聚酰亚胺薄膜的制备方法。
The N10276 clad plate has been used in industry more and more widely, so it is very important to study its hot-forming.
N10276 复合板广泛地应用于工业生产中，对其热压工艺的研究就尤显重要。
The practice proved that the welding quality of stainless steel clad plate was very steady if following the welding points.
实践证明，只要遵循其焊接要点，不锈钢复合钢板的焊接质量是非常稳定的。
The welding parameters of base plate and clad plate refer to those of the same base material and clad material respectively.
基层的焊接工艺参数按同种基层材料焊接的工艺参数确定。
The prospect of stainless clad plate is promising. And the welding of the stainless clad plate is the key factor in its application.
不锈钢复合板具有广阔的发展前景，焊接技术是其推广应用的关键技术。
This paper describes the effect of hot-rolling technology on the composition, structure and properties of explosion-formed Ti-steel clad plate.
本文叙述热轧工艺对钛-钢爆炸复合板的成分、组织和性能的影响。
The shells and heads of those two reactors were made by titanium-clad plate owing to the bad operation condition and the strong corrosivity of medium.
由于操作条件恶劣、介质腐蚀性强，两反应器壳体和封头均采用了钛复合板。
LI X B. Interfacial structure and performance of stainless clad plate [J]. Journal of North University of China (Natural Science Edition), 2006, 27 (4) : 365-368.
[7]李晓波。不锈钢复合板的界面组织结构与性能[J]。中北大学学报(自然科学版)，2006,27 (4)：365- 368。
Evaluation of welding process and hydrogen -resistant peeling test of the clad plate shows that this product possesses excellent, reliable manufacturing and operation properties.
复合钢板经焊接工艺评定和抗氢剥离试验证明，该产品具有优良可靠的制造和使用性能。
In this article defect occurring reason was analyzed and hold that the defect was caused by the special welding structure of the stainless steel clad plate and fabrication process.
文中对缺陷产生的原因进行了分析，认为缺陷系不锈钢复合钢特殊的焊接结构和制造工艺所致。
The paper analyzed the welding characteristic of stainless steel clad plate, and summarized three factors that were welding groove, welding materials and parameter, welding sequence.
对不锈钢复合钢板的焊接特点进行了理论分析，总结出其焊接三要素：焊接坡口、焊接材料和参数、焊接顺序。
The utility model relates to an epoxy paper glass cloth double-faced copper-clad plate, which is applied to the basic materials of different electronic devices, instruments and circuit boards.
本实用新型涉及一种环氧纸玻璃布双面覆铜板，用于各种电子设置、仪器仪表、电路板的基础材料。
The paper studied and analyzed the interface wave of clad plate explosive welding used average arranging explosive, then put forward the new technology of unequal thickness arranging explosive.
通过对均匀布药工艺下爆炸焊接复合板的界面波形进行理论分析，提出不等厚度布药的新工艺。
The present paper discusses chemical compositions, structures and properties of explosion welded and rolled Ni stainless steel clad plate after annealing treatment under different process conditions.
讨论镍—不锈钢爆炸+轧制复合板在不同工艺下退火后的成分、组织和性能，在本试验的条件下，该复合板都有良好的结果。
The existing manufacturing Technology for Clad Plate of Stainless Steel were introduced, and the advantages and disadvantages of these processes were analyzed.
阐述了目前不锈钢复合板的生产方法和制备技术，分析了各种方法的优缺点。
With reducing the cost of materials and meeting some special indexes of mechanical and physical performance, Clad plate is applied widely in industrial manufacture.
复合钢板可以降低材料的使用成本，满足某些特殊的机械性能和物理性能指标，所以在工业生产中得到了广泛的应用。
With reducing the cost of materials and meeting some special indexes of mechanical and physical performance, Clad plate is applied widely in industrial manufacture.
复合钢板可以降低材料的使用成本，满足某些特殊的机械性能和物理性能指标，所以在工业生产中得到了广泛的应用。
应用推荐