The first scheme was a diffuser with wide cone angle.
一种是大扩压角内有分割锥的扩压器 ；
That cone Angle is directly controlled by the focal length.
圆锥角度直接受到焦距的控制。
This tend is weaken with increase of vertical roller cone Angle.
翼缘的宽展量随立辊锥角的增加而减小。
The influences of free flow, cone Angle and bluntness are considered.
该方法考虑了来流、锥角和钝度对底部热的影响。
Cone Angle, the length can be customized according to the parameters of the workpiece.
锥面角度、长度可按照工件的参数定做。
The pyramid is a cone Angle of the building, generally used as a tomb, or ritual purposes.
金字塔是一种角锥型的建筑物，一般用作陵墓或者祭祀之用。
The shape of each die forms a circular table shape, and each die has a definite cone angle.
所述的模具外形呈圆台状，具有一定的锥角；
The variations of nozzle liquid pressure on half-cone angle and breakup length have been analyzed.
研究了半锥角和液膜破碎前长度随液压差的变化规律。
This paper has presented a simplified calculating equation about this cone angle of plug that can be app…
本文提出了适合于工程应用的这种顶头的顶头锥角简化计算公式。
The spotlight and physical light shaders have a button to easily match the cone angle to the maya setting.
聚光灯的灯光的锥形角度（照射范围角度）和物理灯光材质通过一个按钮可以轻易的匹配。
Proper design of roller cone angle of smooth rolling is the key to obtaining a high accurate wall thickness.
斜轧穿孔机轧辊形状设计十分重要，其中辗轧锥角的正确设计是获得高精度壁厚的关键。
Different forms of injection cone and different injection cone Angle have little influence on current heaters.
油嘴的喷油锥体形式及喷油锥角对现用加热器的性能影响不大。
The computing formula of theoretical cone angle of the wormwheel addendum cone and dedendum cone can be derived yet.
推导出蜗轮齿顶圆锥的理论锥角计算公式及齿根圆锥的理论锥角计算公式。
The machine cutting is menu operation controlled by the program automatically except adjusting the cone angle by hand.
机床除根锥角需要手动调整外，切削运动均为菜单式操作，由程序自动控制。
The effects of R/h ratio, L/R ratio and cone angle on the dynamic response of the conical shells are discussed in this section.
分析了圆锥壳结构的径厚比、长径比及锥角变化对结构应力响应的影响。
Theoretical and experimental studies show that such a novel filter can be used in the situation of both large incident angle and cone angle.
理论和实验表明，这种新型滤波器能突破现用滤波器对入射角和光锥角的限制。
Improvement program use of cone Angle chokes; multi-nozzle chokes and multiple exchange design to extend manifold service life to ensure safety.
采用锥角过度节流油嘴设计、多级节流油嘴降压设计和多路放喷管汇设计，达到延长管汇寿命保证安全生产之目的。
However, it is not seen that quantitative analysis on the effects of vertical roller cone Angle on the flange lateral spread has been performed by far.
然而尚未见到关于立辊锥角对翼缘宽展的影响进行定量分析的报道。
In one embodiment, a third collection optic 414 May be included to reduce the cone Angle of the light from the second wavelength converting element 412.
在一个实施例中，可包括第三收集光学器件414来减小来自第二波长转换元件412的光的锥角。
For processing specificity of big cone Angle with exceeding5 degrees, the tests were repeatedly conducted so as to explore feasible processing technology.
针对大于5度的大锥角圆锥滚子加工工艺的特殊性，进行反复试验，摸索出可行的加工工艺。
Doors used in a wide cone Angle and a unique locking pulley set structure, and the clutch drive handle configuration, operation of scientific and reasonable.
内门扇采用锥角宽滑轮和独特的锁定构置，以及离合式传动执手配置，操作科学合理。
The tensile strength, zinc coat mass and service life of die of galvanized steel wire after drawing are compared on the condition of different work cone angle.
在不同的工作锥角度下，比较镀锌钢丝拉拔后的抗拉强度、锌层质量、模子寿命。
The results show that, impulse and impulse coupling coefficient firstly increase and then decrease with the augment of the dimensionless factor when cone angle is fixed;
结果表明：当锥角固定时，冲量和冲量耦合系数随无量纲因子先增大后减小，极大值对应的无量纲因子仅与气体比热比相关；
But if the cone Angle is assumed to be small then a boundary perturbation scheme can be developed. The asymptotic analytical solution of this flow is shown in this paper.
但在小锥角条件下，采用摄动理论的边界摄动方法，我们获得了该流动的渐近分析解。
According to the hydraulic transmission principle, a device for fabricating large cone Angle near-field optical fiber probe by means of dynamic chemical etching is developed.
基于液压传递原理，设计出一种用动态化学腐蚀法制备大锥角近场光纤探针的装置。
Probes of various structures, such as large cone angle and short taper or multi-taper, can be formed with the combination of the static and dynamical chemical etching methods.
利用此法可制备出尖端锐利、大锥角或多锥体等各种结构的光纤探针。
Probes of various structures, such as large cone angle and short taper or multi-taper, can be formed with the combination of the static and dynamical chemical etching methods.
利用此法可制备出尖端锐利、大锥角或多锥体等各种结构的光纤探针。
应用推荐