At the same time copper foil has excellent shield performance.
同时铜金属箔具有优异的屏蔽性能。
The alloy coating obtained is used as the barrier layer of wrought rolled copper foil in PCB manufacturing.
该锌-镍合金作为印制板用压延铜箔的阻挡层。
The product has level surface, stable performance, and high bonding strength to copper foil and aluminum foil;
该产品表面平整、性能稳定、对铜箔、铝箔粘接强度高;
Through precise control of welding process parameters, one-side welding enameled wire to copper foil is realized.
通过对焊接工艺参数进行精密控制,实现了铜箔漆包线的单面直接焊接。
The present invention discloses one low roughening treatment process for the surface of electrolytic copper foil.
本发明公开了一种对电解铜箔的表面进行低粗化的处理方法。
The technical measures to improve roughness copper foil and strengthen dispersion of carbon black were introduced.
介绍了提高铜箔粗化度及加强碳黑分散的工艺措施。
After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.
经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。
Various insulating materials such as electronic shield materials, PVC, film, Mylar, copper foil, aluminum foil, foam, etc.
电子屏蔽材料、PVC、胶片、麦拉纸、铜箔、铝箔、泡棉等多种绝缘材料。
Color of the copper foil may fade if its surface touches perspiration, sputum or remains in wet environment for a long time.
铜箔表面与汗液、唾液接触或长期在潮湿环境下存放会变色。
Filter vessel is the pivotal equipment in the production of electrolytic copper foil. It effects quality of product directly.
过滤器是电解铜箔生产中的关键的设备,直接影响产品的质量。
So to produce the suitable low profile electronic copper foil for high density circuit board (HDI) is more difficult and pressing.
要生产出适合于高密度电路板(HDI)使用的低轮廓电子铜箔更加困难和紧迫。
The most suitable for short shaft. It can show the outstanding performance while coiling metal foil, copper foil and aluminum foil.
最适合短轴使用,卷取金属箔,铜箔,铝箔时,更显现出其卓越性能。
By using commercial copper foil and gold gluing oil, the sample of copper gilding was prepared with traditional gilding techniques.
用市售铜箔和金胶,采用传统贴金工艺制备贴铜样品。
The invention can reduce signal loss of copper foil cladding substrate, improve signal transmission speed and reduce production cost.
本发明可降低覆铜箔基板的信号损失,提高 信号传播速度以及降低生产成本。
The test on copper foil in winding shows the monitoring method is effective, and the device can find flaws such as burr, Nick, and pinhole.
对箔绕机上的铜箔试验表明该方法有效可行,能监测铜箔表面的毛刺、划痕及小孔等质量缺陷。
Equivalent heat conductivity of PWB is related to the thickness of PWB, the residual ratio of copper foil and the thickness of copper foil.
PWB的等效导热系数与PWB的总厚度、铜箔剩余率及铜箔厚度有关,设计时需考虑相关因素。
The relationship of the welding seam microstructure of the drum cathode and the light region forming on the copper foil surface was studied.
研究了阴极辊焊缝处组织与电解铜箔表面上形成的光亮带之间的关系。
A number of scientists, yet, are focussing on the improvement of graphene growth over transition metal substrate such as copper foil substrate.
但一些科学家仍致力于改进借助过渡金属基质的石墨烯生产方法,比如说借助铜箔基板。
From the view of the raw materials used for manufacturing DCB plate, the influence of copper foil and ceramic material on the properties of DCB is studied.
从原材料的角度,研究了制作DC B板所使用的铜箔和陶瓷材料对其性能的影响。
The situation of the copper foil applied to transformers is introduced. The economy, characteristics and types of the transformer with foil windings are presented.
介绍了铜箔在变压器应用的现状,概述了箔式绕组变压器的种类、特点及经济性。
This paper analyzed the main influential factors of the copper foil board base paper, and put forward control measures combining with the practice production, which…
通过对影响覆铜箔层压板原纸主要因素的分析,结合生产实际提出了控制措施,对该产品的生产有一定的借鉴意义。
The copper foil board base paper is the fundamental material to product the paper of printing line board, and also is a kind of higher degree special industrial paper.
覆铜箔层压板原纸是生产印刷线路板用全纸基覆铜箔层压板的基础材料,是一种生产难度较高的特种工业用纸。
The research and production of copper foil board base paper not only changes the construction of the production in papermaking industry, but also increases the economical benefit.
覆铜箔层压板原纸的研究与生产,对造纸业改变产品结构,提高经济效益有着较大的现实意义。
The product is developed aiming at the die-cutting and forming of various insulating materials such as PVC, film, Mylar, copper foil, aluminum foil, foam, ect. In the electronic industry.
本产品主要针对电子产业的PVC、胶片、麦拉纸、铜箔、铝箔、泡棉等多种绝缘材料的成型模切而开发的产品。
Through the investigation of copper foil's preservation condition, it was shown that the acid mist and corrosive gas pollution, temperature, humidity, UV have damage effects on copper foil.
通过调查铜箔保存现状,了解到各种酸雨雾和腐蚀性污染气体以及温度、湿度、紫外线等对铜箔有破坏作用。
The influence of copper foil surface quality on electrical performance of power transformer is analyzed, the key technology for monitoring the surface flaw with machine vision system is studied.
分析铜箔表面质量缺陷对电力变压器电气性能的影响,研究采用机器视觉系统对铜箔表面质量缺陷监视的关键技术。
Also called adhesive copper foil and copper foil tape is the copper metal surface covered a layer of acrylic rubber, can be divided into: double guide copper foil tape and single copper foil tape.
铜箔胶带也叫自粘铜箔,是在铜金属表面覆一层亚克力胶,可分为:双导铜箔胶带和单导铜箔胶带。
The paper dynamically analyses copper Foil tension of the Crude Foil Engine in the copper Foil production progress.
对生箔机在铜箔生产过程中的铜箔张力进行动态分析,揭示出转矩、铜箔张力、实时卷绕半径之间的关系。
The paper dynamically analyses copper Foil tension of the Crude Foil Engine in the copper Foil production progress.
对生箔机在铜箔生产过程中的铜箔张力进行动态分析,揭示出转矩、铜箔张力、实时卷绕半径之间的关系。
应用推荐