It could also be applicable to cutting fluid.
用于多效型水基合成切削液中，试验结果满意。
The use of cutting fluid is a matter of importance.
小小一滴切削液，事关加工的结果。
Cutting fluid is the important related material in metal cutting process.
切削液是金属切削加工中的重要配套材料。
The cutting force can notably be deduced using the cutting fluid during machining.
在切削加工中，使用切削液能显著降低切削力。
The trunnion journal (22) is made by cutting hardened steel with using no cutting fluid.
该耳轴轴颈（22）通过淬火钢的干式切削形成。
HIGHCLEAN is a nonflammable water-soluble cutting fluid of high performance and storage durability.
HIGHCLEAN是高性能和存贮耐久性不易燃的溶于水乳化切削油。
The effects of rust inhibitors, hard water and surfactants on synthetic cutting fluid were investigated.
结果表明，选择合适的功能添加剂调配的合成切削液防锈性能较好，并适应较高硬度的水。
The usage status of cutting fluid can be observed directly by iron spectrometer under a suitable test condition.
在合适的试验条件下，还可利用铁谱仪直观地了解切削液的使用状态。
The emulsion breaking-coagulation-photocatalysis oxidation process was used in the treatment of waste cutting fluid.
采用破乳—混凝—光催化氧化法处理废切削液。
The emulsion breaking-coagulation-photocatalytic oxidation process was used in the treatment of waste cutting fluid.
采用破乳+—混凝—光催化氧化法处理废切削液。
It can clear scrap iron, cutting fluid and some other inclusion in order to raise the precision and the life of bearings.
通过对成品轴承的清洗，可以去除粘附在轴承表面和沟槽内的铁屑、切削液等杂质，提高轴承的精度与寿命。
ATS-305 Semi synthetic soluble cutting fluid is the advantage of both emulsion lubrication, and synthetic fluid stability.
305半合成水溶性切削液的好处是既有乳化液的润滑性，还有合成液的稳定性。
An engineering example of using batch processing for the pretreatment of metal water based waste cutting fluid is introduced.
介绍了采用批处理工艺对金属水基切削废液进行预处理的工程实例。
Mobilcut st is an additive concentrate for the treatment of cutting fluid emulsions and solutions - and water treatment systems.
美孚克特切削油st是一种添加剂浓缩液用作乳化及水溶性切削液的处理剂，也可用在水处理系统中。
The article analyzes the characteristic and the working condition of the cutting fluid using in electrical discharge machining (EDM).
分析线切割工作液的工作特点及工作状态，从生产实践中总结出科学合理选择使用工作液的方法。
Experimental results show that the prepared cutting fluid has excellent features in high abrasion resistance, rust proof and stability.
实验结果表明：该切削液具有良好的高抗磨性、防锈性和稳定性，其抗磨性能明显高于国外同类产品。
The content of boric acid ester, tri ethanolamine salt of substituted benzoic acid, sodium gluconate in cutting fluid was 10%, 6%, 1%, respectively.
实际配方中硼酸酯、取代苯甲酸乙醇胺盐、葡萄糖酸钠的含量分别为1 0 %、 6 %和1 %。
Proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power.
提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。
Boric acid ester, tri ethanolamine salt of substituted benzoic acid and sodium gluconate were used as anti rust additives in water based cutting fluid.
以硼酸酯、取代苯甲酸乙醇胺盐、葡萄糖酸钠三者为混合防锈剂应用于切削液中，其中硼酸酯和取代苯甲酸乙醇胺盐有明显的协同效应。
The cutting fluid has stable quality, safety, environmental protection, excellent processing and antirust performance and high performance-price ratio.
这种切削液品质稳定、安全、环保，加工、防锈性能优良，性价比高。
This article has explained the current situation and characteristics of traditional cutting fluid and the new cutting technology and its development trend.
文章阐述了传统切削液的现状及使用特点和新型切削技术及其发展趋势。
According to the basic requirement of cutting fluid system in green manufacturing, the selecting principle of cutting fluid system in green manufacturing was given.
针对绿色制造对切削液系统的基本要求，提出了绿色制造中切削液系统的选择原则。
The features and developing trend of modern cutting fluid technology in the case of higher requirements for performances and environmental protection are introduced.
综述了在对切削液性能要求和环保要求日益提高的情况下现代切削液技术的特点及发展趋势。
The result showed that not only the performances of this kind of water - synthetic cutting fluid were excellent, but also it was of great environment protection value.
经实用证明：该切削液不仅性能优良，而且具有十分重要的环保意义。
This cutting fluid has good rustproof, fast cooling, lubricity, easy cleaning and long life period (100 days), doesn't irritate the skin, is environment protection products.
该切削液具有良好的防锈性、冷却性、润滑性、清洗性，且它的使用周期长(100天)，不刺激皮肤，属于环保型切削液产品。
To introduce a number of polysilicon, wafer supporting projects, such as high purity quartz powder projects, cutting fluid, silicon carbide, cutting line, band saw into the zone.
硅料、硅片生产重要配套项目：如高纯度石英粉产业化项目、切割液、碳化硅、切割线、带锯等。
As a new green manufacturing technology, dry cutting is effective not only in avoiding the environmental pollution due to cutting fluid, but also in dropping production cost greatly.
干切削作为一种新型的绿色制造技术，不仅能避免切削液对环境的污染，而且能大幅度降低产品的生产成本。
Through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.
分析研究轴承磨加工工序所用的切削液，并选出新型环保导电聚苯胺水性防锈切削液进行试验。
Through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.
分析研究轴承磨加工工序所用的切削液，并选出新型环保导电聚苯胺水性防锈切削液进行试验。
应用推荐