• Powder metallurgy (Fig. 5.1) USES sintering process for making various parts out of metal powder. The metal powder is compacted by placing in a closed metal cavity (the die) under pressure.

    粉末冶金(图5.1)采用烧结工艺将金属粉末制成各种各样的零件。金属粉末放在封闭的金属腔(模具)中在压力下被压实。

    youdao

  • The metal powder is compacted by placing in a closed metal cavity (the die) under pressure.

    金属粉末放在封闭的金属腔(模具)中在压力下被压实。

    youdao

  • The main functional elements of the die and mold include the core and cavity, which impart the desired geometry to the incoming melt.

    冲模和铸型的主要功能元件包含型芯和型腔,以便对引入的熔融液给予所要求的几何形状。

    youdao

  • This paper advanced a study method that can observe plastic deformation behavior of surface layer of die cavity by showing austenite grain, size, crack morphology and propagation mode.

    提出了通过显示奥氏体实际晶粒度、裂纹形貌和扩展方式来分析热锻模具型腔表层塑性变形行为的试验方法。

    youdao

  • And this provides the reliable data for the design of die cavity dimension, and reduces the work of die repair, and also saves a lot of money and labor.

    这对压铸合金模具的型腔设计尺寸的计算提供了非常可靠的数据,减少了模具的反复修磨,节省了人力和财力。

    youdao

  • The fluid material takes the shape of the die cavity and this geometry is finally stabilized by the solidification of the material.

    液体材料充满型腔,随着材料的凝固,零件的几何形状最终固定下来。

    youdao

  • During the course of the plastics melt filling in the die cavity, the forms of the flowing resistance and the energy loss and the reason why they come into being are analyzed.

    本文分析了在塑料熔体充满型腔的过程中,流动阻力及能量损失产生的形式和物理原因。

    youdao

  • By the conditions of plastic stability of a column, the critical coning of die cavity is derived. conditions under which plastic instability can be avoided during upsetting are proposed.

    利用压杆塑性稳定条件,导出了锥腔的临界角;提出了不产生塑性失稳镦锻的综合条件。

    youdao

  • The utility model has reasonable and simple structure, and can fast put products such as connectors into a die cavity, which effectively increases productive efficiency.

    该粘附棒结构简单合理,能快速地把连接片类的产品放置到型腔内,有效提高了生产效率。

    youdao

  • By the conditions of plastic stability of a column, the critical coning of die cavity is derived. conditions under which plastic instability can be avoided during upsetting a...

    利用压杆塑性稳定条件,导出了锥腔的临界角;提出了不产生塑性失稳镦锻的综合条件。

    youdao

  • An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.

    通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析,选择聚丙烯的成型工艺参数,设计了一模一腔的注射模具。

    youdao

  • Three modeling methods and NC auto programming based on shape characteristics of cavity of rolling forging die are discussed.

    根据滚压模型腔的形状特点,介绍了三种不同的建模方法以及数控加工自动编程过程。

    youdao

  • In sheet metal, drawing is a process of forming flat sheet metal into hollow shapes by mean of a punch that causes the metal to flow into the die cavity.

    在板金上,拉伸是一个通过冲床将平板金属冲入模腔拉成中空形状工件的工艺过程。

    youdao

  • It's one of best methods to use polyurethane rubber rather than usual cavity or core in steel die.

    以聚氨酯橡胶代替通常钢模中的凹模或凸模是比较有效的方法之一。

    youdao

  • The die with one mould and one cavity was designed based on the geometry size and structure of the components.

    根据铝合金进气接管外形尺寸与结构等特点,该模具宜设计成一模一腔。

    youdao

  • Multiple die with hydraulic compensating device adopts the design of multi-dies gathering in a common grease cavity, using high temperature lubricating grease as the pressure compensating medium.

    多冲模液压补偿装置采用多个冲模集于同一油脂腔中并用高温润滑油脂作压力补偿介质。

    youdao

  • The temperature-time curve of the heated die cavity and the relation between temperature and time under different initiatory temperature were determined.

    测定模膛加热的温度-时间曲线及不同起始温度下模膛温度与时间的关系。

    youdao

  • The reason to be damaged in production for cavity die in CONFORM continuous extruder is analysed and measures to prolong its lifetime recommended.

    分析了Conform连续挤压工装件——腔体在生产工艺中损坏的原因及提高腔体使用寿命的措施。

    youdao

  • Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.

    以鞍座泡沫塑料垫成型模为例,阐述了曲面型腔模具的锌基合金铸模工艺,同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。

    youdao

  • Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.

    以鞍座泡沫塑料垫成型模为例 ,阐述了曲面型腔模具的锌基合金铸模工艺 ,同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。

    youdao

  • Taking the molding mould for the saddle foamed plastic pads as an example, the casting technological process for the curve-surface cavity zinc-based alloy die was stated.

    以鞍座泡沫塑料垫成型模为例 ,阐述了曲面型腔模具的锌基合金铸模工艺 ,同时将三维温度场电算技术在铸模过程模拟预测中进行了有效的应用。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定