Place the engine cylinder head over the dowels.
将引擎汽缸头放在销上。
It was applied in de-noising for engine cylinder head vibration sign…
将其应用于发动机缸盖振动信号降噪，取得了满意的效果。
This procedure is done with the engine cylinder head removed from the block.
程序用来从引擎区拆下引擎汽缸盖。
A numerical simulation is presented for 3-d filling progress of engine cylinder head casting.
应用数值模拟的方法研究了发动机缸盖铸造的三维充型过程。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
程序用来从引擎区拆下引擎汽缸盖。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
从汽缸体拆下引擎汽缸盖（请参阅本部分之汽缸盖拆卸）。
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
拆下汽缸头盖，请参阅本节中的汽缸头盖的拆卸。
In order to reduce the cost of the diesel engine cylinder head cover, the panel substituted the original aluminum cast part.
为了降低柴油机气缸盖罩的成本，使用板件替代原先的铸铝件。
An engine cylinder head gasket leaking between a cylinder and an adjacent water jacket is indicated by coolant foaming or overheating and loss of coolant.
在一个汽缸和相邻的水套之间的引擎汽缸头套环泄漏的标志是冷却液冷却液产生泡沫或者过热，并且冷却液流失。
This paper analyses the properties of the excitation and response of an engine cylinder head system and establishes the vibration model of the cylinder head system.
对内燃机缸盖系统的振动激励及表面振动信号的特性进行分析，建立了缸盖系统的振动模型。
Taking its application in cleaning of diesel engine cylinder head as an example, the cleaning results by ultrasonic-wave cleaning techniques shows good and satisfactory.
以柴油机缸盖超声波清洗机为例，阐述了超声波的清洗工艺及其应用。
The lifting wavelet package transform based on interpolating subdivision was introduced. The engine cylinder head vibration signal's time-frequency characteristics were analyzed.
分析了移动装备发动机缸盖振动信号的时频特性，介绍了插补细分提升小波包变换算法。
This paper introduces the technology and equipment of machining the engine cylinder head of Charade sedan after technical modification to adapt to the production in large batches.
为适应轿车的大批量生产，介绍夏利轿车发动机汽缸盖生产线在进行技术改造后的加工工艺和设备。
Finally, this paper took a production line of 5v engine cylinder head for example, and proposed a process to design prototype system, to improve the efficiency and accuracy of product line p.
最后，以5V发动机缸盖生产线的设计为例，完成原型系统的开发，提高了生产线规划的效率和准确度。
Motorcycle engine cylinder head series:Including the exclusive intellectual property of the dual metal cylinder head and water-cooled cylinder head. These products are dluminum casting products.
摩托车发动机汽缸头系列产品：包括独有只是产权的双金属汽缸头和水冷却汽缸头。
Research has believed that veining in admission and exhaust passage of diesel engine cylinder head may mainly be caused by crack of sand core occurring in high temperature phase change expansion.
研究认为，柴油机气缸盖进、排气道脉纹的产生主要是由硅砂高温发生相变膨胀导致砂芯开裂引起的。
In order to on-line process engine cylinder head vibration signals of mobile equipment, a de-noising method with gradual changing threshold based on lifting wavelet package transform was proposed.
为了实现移动装备发动机缸盖振动信号的在线处理，提出一种基于提升小波包变换的渐变式阈值降噪方法。
With the numerical simulation of heavy-duty diesel engine to strengthen performance, a CAD assembly model of cylinder head bolt is built based on the thread.
结合大功率柴油机性能强化的数值计算，在考虑螺纹的基础上建立了气缸盖螺栓的CAD装配体模型；
This paper measured the non steady state temperature field of cylinder head in an air cooled engine. It analysed the temperature variation under transient operating conditions of engine.
本文对车用风冷发动机汽缸盖的非稳态温度进行了实测，分析了启动、突加和突减三种过渡工况下汽缸盖温度的变化规律。
This article introduces the engine important parts cylinder head valve pipe hole and sealing trip on their technical method and analyse used in the machining center.
介绍了发动机上重要部件汽缸盖中气门导管孔和密封带在加工中心上的工艺方法，并对其进行了分析。
As a key component of engine, the head of cylinder is a typical complex casting with thin wall.
作为汽车重要部件的发动机气缸盖，是典型的薄壁复杂铸件。
In this paper, the temperature reduction of cylinder head metal wall and the influence on engine performance are investigated by different thickness of PSZ coating on cylinder head combustion surface.
本文研究了气缸盖火力面喷涂不同厚度的PS Z层对气缸盖金属壁面温度降低的情况及对发动机性能的影响。
He took the flashlight from the man, reached down into the engine and plugged the stray lead back onto the cylinder head.
他从那个手里拿过电筒照著发动机，把断路的导线接到汽车缸盖上。
The inlet and exhaust systems (including inlet and exhaust manifolds and ports of cylinder head) resistance of model 492 gasoline engine have been measured by the steady flow tests.
采用穗流试验的方法测定492汽油机进排气系统的阻力(包括进排气管和气缸盖进排气道)。
It is composed of open type engine body, hydraulic power cylinder, upper pressure head, and lower type box. The type box can be collocated with manual four-positions renewal.
有开式机身、液压动力缸、上压头、下字盒等组成。下字盒可配手动四位根据用户要求更换。
In this way, the bottom of the oil tank can approach the cylinder head on the top of the engine as much as possible.
这样，就能使油箱底部尽可能近地靠近发动机顶部的缸头。
The key position bolt of the engine include connecting rod, crankshaft, main bearing, cylinder head, flywheel and shock absorber bolt, all of which belong to bolt fastening.
发动机关键工位螺栓包括连杆螺栓、曲轴螺栓、主轴承盖螺栓、气缸盖螺栓、飞轮螺栓和减振器螺栓等均属螺纹联接。
This equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.
本设备专门用于对发动机缸体、缸盖水套及油道的泄漏检测；
The manufacturing quality of the cylinder head, hence the engine performance can be improved effectively by using the system.
此系统有效地提高了气缸盖的制造质量和性能指标。
The manufacturing quality of the cylinder head, hence the engine performance can be improved effectively by using the system.
此系统有效地提高了气缸盖的制造质量和性能指标。
应用推荐