Epoxy system and spout adhesive approach to international level.
环氧胶系列和喷胶已达到国际领先水平。
A liquid aromatic diamine cured epoxy system with very good high temperature and electric insulation properties is found after experiment and production.
本文通过实验对比和生产实践，找到了一种高温力学性能和电气绝缘性能极好的液体芳香胺固化环氧树脂体系。
In order to improve the water resistance and corrosion resistance properties of epoxy powder coating, the epoxy system were modified by blending it with the lanthanide bakelite.
为了改善环氧粉末涂料体系耐水性和耐腐蚀性，通过添加稀土酚醛对环氧树脂进行了改性。
The body of valves is printed by powdered epoxy, can be prevent the corrosion and rusting, can be used to sewage system.
阀体采用粉体环氧树脂涂装，可防止阀体的腐蚀及生锈，并可用于污水系统。
The relations of viscosity vs. temperature and gel time vs. temperature of 3233 epoxy resin system are studied.
研究了3233环氧树脂体系的粘度-温度关系、凝胶时间-温度关系、热力学性能、垂直燃烧性能和力学性能。
On the contrary, the tensile strength of the system improve with the increase of epoxy content.
与此相反的是，此体系的断裂强度则随环氧树脂用量的增加而提高。
Star Maling Glass Flake Epoxy is an economical coating system especially suited for helidecks, hull exteriors, splash zones on offshore structures and other areas exposed to abrasion and impact.
本产品是一个经济型体系，特别适用于海洋平台的甲板、船体外壳、飞溅区以及其它暴露在外受磨损和冲击的区域。
The formulation and process of epoxy primer and polyester polyurethane top finish in this system were introduced.
介绍了该涂料体系的环氧底漆和聚酯聚氨酯面漆的配方和生产工艺。
Color epoxy grout system and method for use.
彩色环氧灰浆系统和其使用方法。
By description of the spray process of epoxy powder, expounded the constitution of the spray system and design consideration, work principle, and a design plan adopted in actual design process.
通过对环氧粉末喷涂工艺过程的叙述，阐明了喷涂系统的组成及设计思想、工作原理，介绍了在实际设计过程中采取的设计方案。
There is great difference in the performance among the different epoxy curing system, the kinds and the contents of the modified components have influence on the performance of the adhesive.
不同的环氧固化体系的性能存在较大差异，改性材料的种类和用量对结构胶的性能也存在不同程度的影响。
A mixed stabilizing system of epoxy soyabean oil and organotin had synergistic action, resulting in a good stability.
环氧大豆油与有机锡组成的复合稳定体系具有协同性，稳定效果较好。
The preparation methods of waterborne epoxy resin, the kinds of waterborne curing agents and the methods for choosing auxiliary, pigments and fillings in the system were introduced.
介绍了该体系中水性环氧树脂的制备方法、水性固化剂的种类以及助剂和颜填料的选择方法。
The influences of surface treatments, the pressures during bonding process and the thickness of adhesive layer on shearing strength were investigated with epoxy resin-DDS curing system as adhesive.
采用环氧树脂-DDS固化体系作为胶接剂，探讨了各种金属表面处理方法、胶接时对胶接面施加的压力、胶层厚度等因素对胶接剪切强度的影响。
The development status of waterborne epoxy paint system was reviewed.
概述了水性环氧涂料体系的研发状况。
Made a comparison to the spray systems at home and abroad, and pointed out the problems existed in the aspect of epoxy powder spray system in our country and put forward recommendations.
对国内外的喷涂系统做了比较，指出我国目前在环氧粉末喷涂系统方面存在的问题，提出了改进建议。
Through applying a liquid modified aromatic amine as curing agent for epoxy resin, a high performance resin matrix system for resin transfer moulding (RTM) was derived.
选用一种液体改性芳香胺为环氧树脂的固化剂，得到了一种适合于树脂传递模塑(rtm)的高性能树脂体系。
The title coatings has been prepared by use of melting intercalation technology to introduce the OMMT into epoxy resin system.
利用熔融插层法将有机蒙脱土引入环氧树脂体系，制备出含有纳米分散蒙脱土的无溶剂环氧涂料。
The results showed that the shrinkage of system were improved obviously by adding modified epoxy acrylic ester, and the diluent had effect on shrinkage.
实验结果表明：改性环氧丙烯酸酯可以明显改善体系收缩率，稀释剂对收缩率有影响。
A system of epoxy resin reinforced with nylon strap and polyurethane resin suitable to the wrapping cover technology for the synthetic fiber fabric was introduced.
介绍了一种适合纤维织物缠绕包复工艺的尼龙带增强环氧和聚氨酯包复体系。
The latent curing acceleration of the rareearth organometallic compound (MrAn) for the anhydride/epoxy resin system was studied by DSC, TG and rotation viscometer, etc.
结果表明，这种稀土化合物是酸酐／环氧树脂体系较为理想的潜伏性促进剂。
The curing system of a middle-low temperature curable epoxy film adhesive SY-70 was determined by the choices of proper accelerator and its content.
通过选择合适的促进剂及其用量，确定了中低温固化环氧胶膜sy- 70的固化体系。
It also showed that the paint system of zinc-richened epoxy priming paint associated with glass-fibre clothe strengthened epoxy coal pitch was good for submarine cable protecting.
海底输油管线以环氧富锌底漆配以玻璃布增强厚浆型环氧煤沥青漆的涂装体系应用效果最佳。
The effect of kinds and concentration of epoxy monomers, isopropanol and BP on photosensitive properties of epoxy polysiloxane (CEPS) cationic photopolymerization system.
本文研究了环氧单体的种类及用量、异丙醇及二苯甲酮对环氧有机硅预聚体CEPS阳离子光聚合体系感光性能的影响。
The results showed that the fracture surface of the modified systems displayed tough fracture features, markedly different from that of the unmodified epoxy resin system.
结果表明，增韧后材料的断面形态明显不同于未改性体系的形态，试样冲击断裂面形态具有明显的韧性断裂特征。
SEM analysis indicated that there was remarkable toughness fracture surface morphology for the epoxy resin system modified with ESBSVP.
SEM结果表明，经ESBSVP改性的环氧树脂体系断面呈现出明显的韧性断裂特征。
The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.
环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。
The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.
环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。
应用推荐