Short fatigue crack propagation is much accelerated by filled hydrogen.
充氢条件下，大大加速短裂纹疲劳扩展。
Fatigue crack growth threshold is predicted based on materials cyclic plasticity.
基于材料的循环塑性预测了疲劳裂纹扩展的门槛值。
A distribution function of two dimensional threshold is given for fatigue crack propagation.
本文给出二维疲劳裂纹扩展门槛值分布函数，建立二维应力—门槛值干涉模型。
And formation of typical fatigue striation on fatigue crack steady propagation is difficult.
其疲劳裂纹的稳定扩展也较难形成典型的疲劳条带。
An experimental study on the fatigue crack growth of GH4169 superalloy has been carried out.
本研究中对GH4169高温合金的疲劳裂纹扩展性能进行了试验研究。
The fatigue crack extended under the applied stress and led to clutch fork crack and failure.
在工作应力作用下，裂纹不断扩展，最后导致拨叉完全开裂失效。
The fatigue crack growth curve from initial crack size till fatigue failure is simulated step by step.
循环续循环模拟计算出裂纹从初始长度一直到疲劳破坏的扩展曲线。
We get valuable results about the effect of the stress ratio and residual stress on fatigue crack growth.
在应力比，残余应力对疲劳裂纹扩展的影响方面获得了有价值的成果。
The formula of the fatigue crack propagation rate was directly derived from the fatigue damage criterion.
通过疲劳损伤准则，导出疲劳裂纹稳定扩展速率的计算公式。
The methods of fatigue crack initiation life predictions under complex load are introduced in this paper.
介绍了复杂载荷下疲劳裂纹形成寿命预测的方法。
The fatigue crack closure and fatigue crack growth rate in the high strain region of SCT specimen are studied.
本文研究了SCT试样高应变区的疲劳裂纹闭合效应和疲劳裂纹扩展速率。
Fatigue crack propagation in a compressive residual stress field can be characterized with the closure effect.
疲劳裂纹在残余压应力场中的扩展可借助于裂纹闭合力来描述。
Effect of experimental parameters on small fatigue crack growth threshold test in 9310 steel was investigated.
针对9310钢研究了试验参数对疲劳小裂纹门槛值测试结果的影响。
The origination and propagation of fatigue crack in materials under variable load is the main style of failure.
疲劳裂纹的萌生和扩展是材料在变载荷作用下的主要失效形式。
Reconstructed model technique is successfully applied to measure short fatigue crack length in the testing work.
将复型技术应用于疲劳小裂纹扩展试验中的裂纹长度测量。
Firstly, the paper analysed the formation mechanism of the fatigue crack in asphalt pavement with semi-rigid base.
首先，论文分析了半刚性基层沥青路面疲劳裂缝的形成机理。
Finally, examples are given for predicting the fatigue crack initiation life from the tensile properties of steels.
最后给出了根据钢的拉伸性能估算疲劳裂纹起始寿命的实例。
The fractography of the fatigue crack initiation displayed cleavage facet and more second cracks after pre-training.
裂纹形成的断裂为穿晶解理机制，预应变可导致更多的二次裂纹。
We also make tentative researches for fatigue fracture and for the effect of secondary crack on fatigue crack growth.
本文还在疲劳断口的研究方面进行了新的尝试，探讨了二次裂纹对疲劳裂纹扩展的影响。
The failure forms of cold work roll including contact fatigue crack, spalling, inclusion crack and wear are discussed.
讨论了冷轧工作辊接触疲劳裂纹、剥落、夹杂物裂纹和磨损等失效形式。
The results show that the fatigue crack not only decreases the natural frequency, but also causes non linear vibration.
计算结果表明，疲劳裂纹不仅使悬臂梁的固有频率下降，而且引起非线性强迫振动响应。
The fatigue crack growth rate is the core for predicting fatigue life by use of fatigue crack propagation (FCP) theory.
疲劳裂纹扩展率表达式是采用疲劳裂纹扩展理论预报疲劳寿命的核心。
An automatic compliance crack length measurement system for fatigue crack propagation test was used in the experiments.
研究中应用了一种柔度法疲劳裂纹自动测量系统进行裂纹长度测量。
The simulating results have indicated that: the crack closure effect is obviously influenced by the fatigue crack length.
在建立裂纹扩展模型的时候，要考虑到裂纹长度对裂纹闭合效应的影响。
This paper gives a comprehensive introduction and review of the models for predicting fatigue crack growth under spectrum loadings.
本文对谱载荷下预测疲劳裂纹扩展的各种模型作了综合介绍及评述。
A method is proposed to simulate the fatigue crack growth by finite element technique for corner cracks under cyclic tension loading.
给出了一种利用有限元技术模拟周期性张力载荷作用下孔边角裂纹扩展过程的方法。
The results show that metallurgical defect is the main reason leading to early formation of fatigue crack under normal working stress.
认为，该曲轴材料的冶金缺陷是导致疲劳裂纹在正常工作应力下过早形成的原因。
By comparing fatigue crack with electrosparking crack, the effects of crack tip on fracture toughness of ductile iron have been studied.
通过开疲劳裂纹和线切割裂纹的对比试验，研究裂纹尖端的尖锐程度对球墨铸铁断裂韧性的影响；
Short cracks propagation research: the degree of Microscopic structure influence to the fatigue crack propagation depends on crack length.
短裂纹扩展研究：微观组织结构对疲劳短裂纹扩展的影响程度取决于裂纹的长度。
The results showed that failure morphology was of typical contact fatigue characteristics, and two modes of fatigue crack formation worked.
结果表明，失效形貌呈典型的接触疲劳特征，两种疲劳裂纹形成模式同时存在。
应用推荐