The complete story of why the center of my ferrule has no black nickel on it would take pages to explain.
为什么在我的金属箍的中间部分没有黑镍这个问题，就得用上好多页纸才能回答清楚。
The ferrule base (10) is molded over the collar (6).
该套管基部(10)模制在该套环(6)之上。
The ferrule capillary (2) has a polygonal collar (6).
该套管毛细管（2）具有一个多角形套环（6）。
A ferrule and eraser are crimped into place on each pencil.
金属环把橡皮头固定到每一根铅笔上。
Its ferrule followed lightly on the path, squealing at his heels.
手杖上的金属包头沿着小径轻快地跟随着他，在他的脚后跟吱吱作响。
The ferrule portion is bent along the longitudinal axis to form a bend.
套圈部分沿着纵向轴线弯曲以形成弯曲部分。
Of roots at the top and the much-scratched metal ferrule and spike at the base.
根顶部和急需抓伤的金属箍和扣球的基础。
The ferrule effect is influenced by elastic modulus of post and core materials.
箍效应受桩核材料弹性模量的影响。
The tapered legs, each fitted with a brass ferrule caps the bottom, appear elegant.
琴脚设计呈锥形，最底下套有黄铜金属环，呈现出尊贵气派。
Bearing bore or outside the surface and the ferrule end face connected to a ring surface.
轴承内孔或外表面与套圈一端面连接的套圈表面。
A fiber optic ferrule comprises a precision ferrule capillary (2) and a ferrule base (10).
一种光纤套管，其包含一个精密的套管毛细管(2)和一个套管基部(10)。
The utility model comprises a handle, the head of which is connected with a ferrule by screw.
本实用新型包括手柄，手柄的头部与卡套螺纹连接。
For compression end connection, first slide compression nut onto copper tube, then slide on ferrule.
对于压缩端口连接，首先将压缩螺母移动到铜管上，然后装上套圈。
A sleeve is sleeved at the lower end of the ferrule and arranged between the ferrule and the handle.
套筒套置在卡套下端，并设置在卡套与手柄之间。
Install the valve onto the copper tube and gently slide compression nut and ferrule up to the valve to engage.
在铜管上安装阀门，然后轻轻地把压缩螺母和套圈移到阀门上并进行啮合。
NOTE: 1)You must clean the ceramic ferrule and it's tip with alcohol and absorbent cotton very carefully before using.
注意：1） 在使用前请将插针体和插针端面用酒精和脱脂棉清洗干净。
Objective: To study the clinical effect of dual metal ferrule for on fixed prosthesis in the residual roots and crowns.
目的：探讨双重金属领圈在残根、残冠修复治疗中的临床效果。
The ferrule portion includes a cylindrical wall, a first end, a second end, a longitudinal axis and a stress relief aperture.
套圈部分包括圆筒形壁、第一端、第二端、纵向轴线和应力释放孔。
The utility model comprises a nut cutting sleeve (1), a hollow guide tube (2), a metal ferrule (3), a pin (4) and a handgrip (5).
本实用新型由螺母卡套(1)，空心导管(2)，金属箍(3)，销钉(4)，手柄(5)组成。
Easy, permanent assembly between the tubing and fittings: push the tubing over the fitting ferrule until the tubing "clicks" into place.
易之间的管材，管件常设大会：推入拟合套圈油管，直到管“点击”到位。
A ferrule type, flareless fitting is provided that may optionally be pulled-up to its assembled condition by torque rather than by turns.
提供一种套圈式无扩口管接头，该管接头可以通过扭转而不是通过转动随意地接上到它的装配好的位置。
Another ferrule that is used to enclose the wrist and antebrachium is linked to the crossbar of the U-shaped rack through elastic strings.
一用于腕臂套置的腕臂套圈通过弹力带连接在U形前支架的横杆上。
Another ring for the difference between the base-level, allowing the ferrule at the base of the non-standard technology of surface markers.
为区别另一套圈的基准面，允许在该套圈的的非基准面上标工艺标志。
The purpose of this article is to review the types and designs of the ferrule and to identify the factors that influence the ferrule effect.
本文就箍结构的类型、设计、作用及影响箍效应相关因素的研究进展作一综述。
Tube fittings shall be flare less compression type of three-piece construction consisting of ferrule nut and body suitable for use on ss tubes.
管道管件应为非扩口压缩式三件构造，由套圈、螺帽和本体组成，适宜安装在不锈钢管道上。
The Cue Tip should be larger in diameter than the ferrule so that it can be properly shaped. Make sure the glue is completely dry before shaping.
粘合上的皮头应该是比先角大上一圈的，待会我们会对它进行切割成型。在切割皮头使其成型前要先确保胶水已经干透。
An infrared ray burner includes an upper combustion layer ceramic plate, a lower combustion layer metallic plate, a shell, a ferrule and a wire netting.
一种红外线燃烧器，包括：上燃烧层陶瓷板、下燃烧层金属板、外壳、金属箍、金属网。
For the Chinese ferrule maker, it is the urgent problem that how to increase the industrial productivity with high yield rate and high performance ferrule.
如何实现高品质、高精度陶瓷插芯的定量化和工业化生产，是现阶段国内众多光通信制造企业共同面临的紧迫问题。
For the Chinese ferrule maker, it is the urgent problem that how to increase the industrial productivity with high yield rate and high performance ferrule.
如何实现高品质、高精度陶瓷插芯的定量化和工业化生产，是现阶段国内众多光通信制造企业共同面临的紧迫问题。
应用推荐