In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Based on image processing technology, a method of geometric modeling is presented for two dimensional finite element analysis of asphalt mixture.
提出了一种基于图像处理技术的沥青混合料二维有限单元分析的几何建模方法。
A converse modeling and Finite Element grid division method is systematically introduced in this paper.
本文系统地介绍了逆向建模和有限元网格划分方法。
For the Non-Newtonian fluid, Finite Element Method (FEM) is used to have an accurate description of the fluid flow details and this result can be used for further reduced-order modeling.
然后针对一类复杂的非牛顿流体，采用有限元方法对其建模分析，得到的结果可以为进一步的简化解析建模提供参考。
Finite element method las been practically applied to the forward modeling of elastic wave. But its shortcomings, such as large storage needed and slow calculation, remain.
用有限元法做弹性波正演模型计算已进入实用阶段，但有限元法所要求的大存储量和计算速度慢的缺点依然存在。
The strength and rigidity of bus body are analyzed, with finite element method and the finite element modeling is validated using the electric measure technique.
用有限元法对半承载式客车车身强度、刚度进行了分析，用电测量技术对有限元模型进行了验证。
And then obtained the modification model of sensor shell with sufficient accuracy by adopting the combined modeling method of experimental modality analysis and finite element modeling.
然后采用实验模态分析和有限元建模相结合的建模方法，获得了足够精度的传感器壳修正模型。
Finite element method is an useful tool for modeling seismic wave in complex medium, it simulates seismic wave propagation quite realistically and displays seismic wave fields in quite detailed way.
有限元法是复杂介质地震模拟的有力工具，它能比较客观地反映地震波的传播过程，比较细致地再现地震图像。
The discussions of the simplified finite element modeling method of the satellite electronic equipments with closed box segment combination structure are given.
对于以封闭式盒段组合结构为特征的卫星电子设备，讨论了其有限元模型的简化建模方法。
The cutter's design method, including parameter design and modeling, stress analysis and calculating, finite element analysis and correcting was introduced in detail.
详细介绍了铣刀的设计方法，包括参数设计与建模、受力分析与计算、有限元分析与校正。
The technique facilitates the modeling of multilayered passive circuits using the hybrid mode matching and finite element method (MM/FEM).
这里采用了模式分析和有限元相混合的方法来分析多层无源电路。
This approach can improve modeling precision and efficiency of producing involute gear, and provide necessary condition for finite element method analysis of involute gear.
该方法可以提高渐开线齿轮造型精度与效率，从而为渐开线齿轮的有限元分析提供了必要条件。
The modeling of toroidal mirror was analyzed by finite element analysis method.
利用有限元方法对超环面镜的压弯力学模型进行分析。
This paper proposes a general finite element (FE) based phase variable modeling method of permanent magnet (PM) linear motors for the accurate dynamic simulation of drive systems.
考虑电机非理想结构对推力的影响，建立了永磁直线电机的一般化相变量模型。
Method of finite element partition, modeling procedure of finite element method, modeling process of triangle unit and quadrangle unit are detailedly introduced;
有限单元分割的方法和有限元方法建模的步骤，重点介绍三角形单元、四方体单元的建模过程；
The modeling for three-dimensional incompressible viscous non-isothermal steady flow was presented by using penalty finite element method.
针对幂律型流体，建立了稳态三维粘性不可压缩流体非等温流动的有限元模型。
Some modeling approaches such as substructure method, finite element method and power flow analysis are summarized.
并讨论子结构方法，有限元法和功率流方法。
Then, it introduced the approach to evaluate footwear with finite element method, and the process of the reconstruction of the 3-d finite element Modeling of human foot - skeleton based on ct images.
然后介绍了通过有限元法评价足部用品的原理，以及根据CT图像建立三维足部骨骼有限元模型的过程。
The extended finite element method (XFEM) is a numerical method for modeling discontinuities within a standard finite element framework.
扩展有限元法是近年来出现的一种在常规有限元框架内求解不连续问题的数值方法。
With the help of ANSYS system, it mainly deals with the modeling of a multi-stage gear rotor system with finite element method and analyzing the vibration modes of the system.
利用有限元应用软件ANSYS建立了齿轮转子系统耦合振动分析的有限元计算模型。
The method is tested to be useful in the finite element modeling based on 3d computer tomography images or surface model.
对于基于3维断层图像或表面模型进行有限元建模，该方法不失为一种行之有效的好方法。
The numerical method for modeling strong (displacement) as well as weak (strain localization) discontinuities with a standard finite element framework is presented.
据此，给出了这种在常规有限元框架下可模拟强不连续问题（位移）和弱不连续问题（应变局部化）的数值方法。
Method: 3-d finite element modeling was computed and analyzed.
方法：采用三维有限元法建立模型并计算、分析。
Based on the nonlinear, elastic-plastic finite element method theory, the modeling approach of the numerical simulation of incremental sheet metal forming was studied firstly in this project.
本课题基于非线性、弹塑性有限元理论方法，对金属板料渐进成形的数值模拟的建模方法进行研究。
Based on the nonlinear, elastic-plastic finite element method theory, the modeling approach of the numerical simulation of incremental sheet metal forming was studied firstly in this project.
本课题基于非线性、弹塑性有限元理论方法，对金属板料渐进成形的数值模拟的建模方法进行研究。
应用推荐