The beam has a constant flexural rigidity.
该梁具有常数弯曲刚度。
Testing mechanism of flexural rigidity is described.
描述了抗弯刚度的测定机理。
In this case, the power is supplied by piezoelectric flexural transducers.
在这个例子中，压电式受弯换能器提供电能。
This is a long-drawn flexural journey full of challenge and expectation.
这是一个漫长曲折，同时充满挑战与期待的旅途和征程。
In borehole sonic logging, these may be the shear, flexural and Stoneley waves.
在井眼声波测井中，这些波是横波、弯曲波、斯通·利波。
The test results indicate the flexural performance of the strengthened slab is good.
试验研究的结果表明，加固后试验板的受荷性能良好。
The relationship between nucleation temperature and flexural strength was investigated.
探讨了核化温度与抗弯强度之间的关系。
It depends on the elastic foundation of the matrix and the flexural stiffness of fibers.
这种分析还依赖于基体的弹性以及纤维在基体中的弯曲刚度。
Infiltrated ceramics with similar flexural strength have similar microstructures under SEM.
强度相同的四种渗透陶瓷SEM表现也相似。
The flexural tensile strength of perforated concrete brick masonry is studied by experiment.
通过试验研究了混凝土多孔砖砌体的弯曲抗拉强度。
A flexural oscillation model about V-shaped silicon electro-thermal micro actuator is presented.
提出了V型电热硅微致动器的弯曲振动力学模型。
Shear connection degree has an effect on the flexural capacity and deflection of composite beams.
部分剪力连接对组合梁的受弯极限承载力和变形均有影响。
Based on the tests, the calculation formula of flexural bearing capacity of the columns is given.
在试验的基础上，给出了角钢混凝土柱正截面承载力计算公式。
Based on the testing results, ultimate flexural strength and flexural Young's modulus have been studied.
根据试验获得的结果，综合地分析了其极限弯拉强度和弯拉弹性模量；
Struts of monosymmetric section built with angles and cut-Ts need to be checked on flexural-torsional buckling.
单轴对称的角钢、T型钢压杆有必要做弯扭屈曲验算。
It is also presented a finite element analytical model suitable for non-linear analysis of HFB flexural members.
采用有限元方法，建立适于冷弯截面受弯构件性能分析的非线性有限元分析模型。
Experimental results show that the flexural modulus increases with the increases of the fibre content and length.
实验表明，随着纤维含有量和纤维长度的增加，材料弯曲模量呈递增趋势。
Results showed that the flexural strength of ESMC parts was different at different direction of fiber orientation.
研究表明制品在各流动方向上的弯曲强度有很显著的差别。
In finite and tiny displacement machine, flexural hinges are a new structure machine to implement tiny displacement.
在有限微量位移机构中，柔性铰链是实现微位移功能的新型机械结构。
Objective To study the effects of different treatment methods on the biaxial flexural strength of hot pressable ceramic.
目的研究不同处理方式对白榴石增强陶瓷的双轴弯曲强度的影响。
Steel-concrete composite beam is a kind of flexural member composed by concrete slab and steel beam via shear connectors.
钢-混凝土组合梁是指钢梁和混凝土板通过剪力连接件连接形成整体共同工作的受弯构件。
Based on the fatigue cumulative damage models, a damage evolution equation for flexural fatigue of SFRPC slabs is set up.
结合原有的混凝土疲劳损伤模型，建立了预应力钢纤维混凝土板的疲劳损伤演变方程。
For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.
对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。
The experimental results indicate that the flexural capacity and stiffness of the strengthened beam are evidently improved.
试验结果表明，加固梁的承载力和刚度提高明显。
It is mainly used in the strengthening of reinforced concrete flexural members and compression member with large eccentricity.
主要适用于钢筋混凝土受弯和大偏心受压构件的加固。
Based on the tested results, the formulae for calculating flexural bearing capacity and flexural stiffness of LACFST are suggested.
基于试验结果，建议了计算钢管轻集料混凝土抗弯承载力与与抗弯刚度的规范公式。
Taken the lateral flexural rigidity of stiffener, the flexural rigidity in its plane and the torsional rigidity into consideration.
考虑了筋的侧向抗弯刚度及在其平面内的抗弯刚度和抗扭刚度。
The results showed that the tensile strength, flexural strength and flexural modulus increased obviously with increase of amount of Mica.
结果表明，复合材料的拉伸强度、曲强度和弯曲模量随着云母用量的增加而提高。
Slip casting aluminous ceramic crown is a new all-ceramic system with high flexural strength, optimum marginal fit and improved aesthetics.
粉浆涂塑铝瓷冠是新近推出的一种全瓷修复系统，具有强度高、边缘适合性好透光性好等诸多优点。
Slip casting aluminous ceramic crown is a new all-ceramic system with high flexural strength, optimum marginal fit and improved aesthetics.
粉浆涂塑铝瓷冠是新近推出的一种全瓷修复系统，具有强度高、边缘适合性好透光性好等诸多优点。
应用推荐