• And by defining ALE interface in coupling interface the interaction between fluid domain and solid domain was transmitted.

    在耦合界面上,通过定义ale界面传递流体域和固体域之间的相互作用。

    youdao

  • The coupling heat transfer was calculated using fluid area and solid area coupling solution.

    采用了流体域与固体域耦合求解法计算耦合换热。

    youdao

  • The mathematical model of fluid percolation and rock deformation of fluid-solid coupling is solved with the finite difference method and the finite element method respectively.

    分别采用有限差分法和有限元法对流固耦合流体渗流数学模型与岩石变形数学模型进行了求解。

    youdao

  • According to the hydromechanics and the elasticity theory established axial flow pump's fluid - solid coupling finite element equation.

    根据流体力学和弹性力学建立了轴流泵的流-固耦合有限元方程。

    youdao

  • As the VLFS is a long, huge and thin flexible structure, its hydrodynamic response in waves is a typical problem of fluid-solid coupling and it cannot be counted as a rigid body.

    由于超大型浮体结构是极为扁平的巨型柔性结构物,所以它在波浪中的动力响应是一个典型的流固耦合问题,不能将其视为刚体。

    youdao

  • As the VLFS is a long, huge and thin flexible structure, it cannot be counted as a rigid body and its hydrodynamic response in waves is a typical problem of fluid-solid coupling.

    由于超大型浮体结构是极为扁平的巨型柔性结构物,不能将其视为刚体,所以它在波浪中的动力响应是一个典型的流固耦合问题。

    youdao

  • The emergence of casing well damages has close contact with interaction of rock body and fluid. So the research of fluid-solid coupling theory model seems very important.

    通过套损机理的研究,可以看出套损问题的发生与岩体和流体的相互作用有着密切的联系,所以研究地下流固耦合的理论模型显得非常重要。

    youdao

  • We can obtain the impeller's interior actual flow situation and the impeller internal stress distribution due to axial flow fluid-solid coupling numerical simulation.

    通过对轴流泵叶轮流固耦合的数值模拟,得到了叶轮内部真实流动情况和叶内部应力分布情况。

    youdao

  • The research of fluid-solid coupling has sharp unsteady and nonlinear character, so the effect of viscosity have to be considered.

    流固耦合具有强烈的非定常、非线性,因此黏性效应不可避免。

    youdao

  • At the same time, analysis the fluid-solid coupling under different working conditions, it has provided certain help and the reference for the later axial flow pump impeller's design.

    同时,详细分析了不同工况下的流固耦合情况,为以后轴流泵叶轮设计提供一定的帮助和参考。

    youdao

  • On the base of discrete equations, the fluid-solid coupling finite element programs for single phase flow and two phase flow in unconsolidated sandstone reservoir were developed with FEPG.

    在有限元离散的基础上,基于FEPG系统自主开发了疏松砂岩油藏单相及两相渗流流固耦合有限元程序。

    youdao

  • On the basis of mathematical model of solid-fluid mass transfer coupling in the process of hydraulic fracture and solution of rock salt, the corresponding numerical simulation is carried out.

    在建立岩盐水压致裂溶解过程的固流传质耦合数学模型的基础上,对该过程进行了数值模拟。

    youdao

  • In the research of water hydraulic technology, flow field simulation is done by the method of Fluid-Solid coupling, leading to the pressure nephogram and velocity vector of the pump model.

    在水压技术理论研究方面,应用流固耦合理论对水压齿轮泵进行了二维流场的仿真分析,得出了其流场压力云图和速度矢量图。

    youdao

  • Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.

    采用随机有限元方法, 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析,得到了随机应力应变响应;

    youdao

  • Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.

    采用随机有限元方法, 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析,得到了随机应力应变响应;

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定