The governing equation of the coupled stiffness problem is derived after partition.
给出分解后耦合问题的控制微分方程；
The nonlinear governing equations of the system are derived from the Lagrange equation.
由拉格朗日方程导出系统的非线性控制方程。
The governing equation is 3D Euler equations, which is solved by the finite volume method.
利用再生核理论和有限差分法给出了一种计算欧拉方程组的新方法 。
The governing equation of a gear system with time-varying meshing stiffness is established.
建立了具有时变啮合刚度的二级齿轮系统的动力学方程式。
This is the governing equation, where the thermal conductivity is a function of temperature.
这就是基本方程，其中导热系数为温度的函数。
The governing equation of motion for fluid particles moving on bucket was deduced on BFC at the same time.
在水斗三维贴体坐标系中，还推导了流体粒子在水斗曲面上的运动控制方程。
The governing equation was derived from the viscoelastic constitution relation by using material derivative.
在控制方程的推导中，对黏弹性本构关系采用物质导数。
The governing equation of the motion of a geared rotor-bearing system is developed according to linear dynamic theory.
根据线性动力学理论，建立了齿轮耦合的转子-轴承系统的运动方程。
For brittle material testing, the governing equation of input waveform for attaining constant strain-rate loading is given.
给出了测试脆性材料时实现恒应变率加载的加载条件。
The energy governing equation of the unsteady heat transfer in the adsorber was developed to simulate the pump cycle process.
对吸附式热泵循环系统中的传热传质进行了理论分析和实验研究，建立了吸附器中热传导方程。
This paper presents numerical solution for governing equation of flows in curvilinear coordinate system with nonstaggered grids.
介绍一种在非交错网格上，求解非正交曲线坐标系下的流动控制方程的方法。
In the governing equation of numerical simulation, factors of resistance considering effects of pile or pile group were applied.
并提出在数值模拟控制方程中，如何考虑加入桩(群)影响的阻力项。
The governing equation of the temperature field of pulse - magnetron is a nonlinear second order partial differential equation .
磁控管的温度分布是二阶非线性偏微分方程。
Governing equation discrete, solving of the conjugated algebraic equation set and SIMPLE method are also discussed in this paper.
同时对方程离散、方程组的耦联求解以及SIMPLE算法等数值计算以及湍流及其模型等问题进行了论述。
The mass-weight averaging N-S equations are adopted as the governing equations of flow, and a two-equation turbulent model is employed.
用法福尔质量加权平均N-S方程及两方程湍流模型求解三维超声速平板湍流边界层流动；
Because of the meshing stiffness of a gear pair, the governing equation denotes a linear dynamic system with periodic time-varying coefficient.
由于齿轮副啮合刚度的影响，动力学方程序代表了一个具有时变系数的线性动力系统。
On account of unsymmetric coefficient matrices of oil film stiffness and damping in bearing, the matrices in governing equation were unsymmetric.
由于轴承油膜刚度、阻尼，运动方程系数矩阵具有非对称特性。
Compared with the purely torsional model, tangential displacements and bearing stiffness of the pinions are included in the governing equation of motion.
该模型在纯扭转模型的基础上，进一步计入了行星轮轴心沿系杆切向的位移与行星轮轴的轴承支承刚度对系统动力学性能的影响。
If we let the transverse shear stiffness approach to infinity, the governing equation of refined theory can be reduced to the classical thin shell equation.
当壳体的横向剪切刚度很大时，证明了本文提出的精化理论同经典理论的一致性。
A multiple modal synthesis method was adopted to obtain governing equation for a whole hydroelectric generator system including rotary and fixed components.
为了解决水轮机随机振动分析问题，采用了多级模态综合技术建立水轮机包括转动部件和固定部件在内的整机系统模型。
Two algebraically explicit analytical solutions of the governing equation set for the coupled heat and mass transfer process of rapid drying in porous media are derived.
对多孔介质快速干燥过程的传热与传质耦合方程组导出了两套代数显式解析特解。
An improved staggered, iterative solution scheme and its corresponding algorithm for the implicit-implicit integration procedure of the governing equation are presented.
文中给出了用于隐式-隐式逐步积分过程的改善的交错迭代求解方案及算法。
The governing equation of our model contains not only the convection and conduction terms, as usual, but also the heat dispersion term, which is neglected la many papers.
模型的控制方程不仅如通常那样包含对流项和传导项，还包含许多文献中常被忽略的热机械弥散项。
By using a numerical shooting code, the governing equation is solved. It is shown that the presence of the temperature gradient makes the stabilization effect of FLR stronger.
利用数值打靶方法求解本征方程，证明存在温度梯度将加强离子有限回转半径的稳定作用。
By the variational method, the governing equation of the plate non-linear theory is solved, and he relationship between load and deformation of a single spring leaf is obtained.
应用薄板非线性理论的变分方法求解基本方程，得到了单片碟形弹簧的载荷和变形关系以及应力分布及其计算公式。
In the elastoplastic analysis, much more attention has been paid to bifurcation behaviour of the governing equation which always predicts various mechanism of failure or fracture.
在弹塑性大变形分析中，控制微分方程的分叉现象予示了一系列有实际工程背景的破坏机理。
The governing equation was derived making use of the viscoelastic constitution relation in which, besides the time derivatives, the material derivatives was also taken into account.
在控制方程的推导中，采用物质导数黏弹性本构关系取代通常采用的只对时间取偏导数的黏弹性本构关系。
By combining the linearization of the governing equation with the method of harmonic balance, we have established analytical approximate formulas for the period and the periodic solution.
将控制方程的线性化与调和平衡法组合起来，建立周期及周期解的解析逼近公式。
By combining the linearization of the governing equation with the method of harmonic balance, we have established analytical approximate formulas for the period and the periodic solution.
将控制方程的线性化与调和平衡法组合起来，建立周期及周期解的解析逼近公式。
应用推荐