• The scan cover, injection rate and reconstruction matrix were assured.

    确定增强扫描范围、佳注射速率与重建矩阵。

    youdao

  • If the injection rate is excessively high, the contrast medium will exosmose easily.

    注射流率过快,会增加对比剂外渗的机会。

    youdao

  • In the SPECjAppServer2004 benchmark, the size of the system is specified by the injection rate.

    在SPECjAppServer 2004基准中,系统的大小是由注入速率(injection rate)指定的。

    youdao

  • Objective To investigate the suitable injection rate and dose in multi-slice CT perfusion imaging.

    目的探讨多层螺旋CT脑灌注成像合适的注射速率及剂量。

    youdao

  • While the injection rate and various combinations have little effect on the ultimate recovery rate.

    注入速度和不同段塞组合,对最终采收率影响不大。

    youdao

  • Comparing among different gas injection rates, it can calculate the optimum injection rate of gas well.

    通过不同注气量对比,可计算出气井最佳注气量。

    youdao

  • This paper proposes a new method to predict heat release rate from fuel injection rate in swirl chamber diesel engines.

    提出了由喷油规律预测涡流室柴油机总放热规律和主、副室放热规律的一种新方法。

    youdao

  • How to determine water injection rate scientifically and rationally is really a problem confronted in water injection reservoirs.

    如何实现注水井的科学、合理配注是注水开发油藏面临的一个难题。

    youdao

  • Objective to choose optimal injection rate in spiral ct portography (CTP) by comparing 3d CTP images using different injection rates.

    目的通过比较使用不同注射速率所获得的螺旋CT门静脉造影(CTP)三维图像,优化注射速率的选择。

    youdao

  • Conclusion The optimized injection rate and reconstruction matrix parameters of lower limb ct angiography could improve image quality.

    结论正确的注射速率和重建方法选择是提高螺旋CT下肢动脉血管成像质量的关键。

    youdao

  • Objective To investigate the optimal injection rate and reconstruction matrix in 64-slice spiral CT lower extremity artery angiography.

    目的探讨64层螺旋CT下肢动脉血管成像的最佳注射速率与重建矩阵的选择。

    youdao

  • Application in oilfield indicates that the model predict the whole process for water injection rate, and it's quite simple and reliable.

    矿场实例应用表明:该模型概括性强,能够对油田注水量进行全过程预测,且计算简单,可靠程度较高。

    youdao

  • It also has good prospects in the scope of water hold-up, pressure build-up and water injection rate measurements through tool modifications.

    该仪器经适当改造,在含水率测试、压力恢复测试、注水测试等领域也具有良好的应用前景。

    youdao

  • Real water injection rate in water injection well will change when system pressure fluctuates or formation water absorption capacity changes.

    注水井实际注水量随系统压力波动或地层吸水能力的变化而改变,这是针型阀或井下固定水嘴无法避免的缺陷。

    youdao

  • The increase of high blast temperature is an effective measure to enhance pulverized coal injection rate, reduce energy consumption, and cost.

    高风温是高炉提高喷煤比、降低工序能耗、降低成本的有效措施。

    youdao

  • The results show that stiffness of spring does not affect the injection rate, but the mass of will affect the needle valve closing response time.

    结果表明,电磁阀铁心弹簧刚度对喷油规律没有影响,但其质量影响针阀落座响应时间;

    youdao

  • Meanwhile, it discusses the pattern cycle water injection rate and effect of cyclic water flooding in the pilot in western area of Fuyu Oil Field.

    同时,结合扶余油田西区矿场实例对周期注水的注水方式、周期、注水量及效果进行了探讨。对裂缝性砂岩油藏实施周期注水具有重要的借鉴意义。

    youdao

  • Higher combustibility and coal injection rate can be acquired in BF by using the coal with lower metamorphic degree and higher content of active matter.

    喷吹低变质度、高活性组份含量的煤可以获得较高的燃烧率和较大的喷煤量。

    youdao

  • Objective: to analyse the accuracy of maximum-slope method in the condition of low injection rate and to find out an efficient way to improve its accuracy.

    目的:分析低流率注射条件下最大斜率法测量的准确性,寻找提高其准确性的改良方法。

    youdao

  • Through numerical modelling, this paper studies the process parameters of steam drive such as steam injection rate, production injection ratio, and steam quality.

    利用数值模拟方法对蒸汽驱中注汽速度、采注比和蒸汽干度等工艺参数进行了研究。

    youdao

  • Objective To evaluate the application of multi-slice spiral ct perfusion imaging in the kidney and the influence of various injection rate on perfusion parameters.

    目的探讨多层螺旋CT灌注扫描在肾脏血流灌注中的应用及对比剂注射流率对灌注参数的影响。

    youdao

  • The new type of filter element host maintains the water injection rate, and meanwhile, the bearing strength of filter element and the reliability are both enhanced.

    采用新型滤芯主体实现了在保持注水流量的同时,提高了滤芯的承压强度,可靠性增强。

    youdao

  • Conclusion When slope method is used in hepatic perfusion imaging, the dose of contrast agent and injection rate have some influence on hepatic perfusion parameters.

    结论用斜率法进行肝脏灌注成像时,造影剂量和注射流率对灌注参数有所影响。

    youdao

  • The advancing velocity of combustion front is proportional to air injection rate. The air injection rate has no significant effect on oil recovery and air consumption.

    燃烧前缘的推进速度与空气注入速率成正比,而提高空气注入速率对采收率和空气消耗量没有太大的影响。

    youdao

  • The variations of dimensionless water-injection rate and injection rates in the vertical well are determined by dimensionless liquid production rate in horizontal well.

    根据水平井的无因次产液速度确定出直井的注水速度,无因次注水速度随时间的变化规律。

    youdao

  • The statistics of 36 oilfield steam drive pilot test results show that the oil-steam ratio depends on not only the reservoir parameters, but also the steam injection rate.

    国外36个蒸汽驱现场试验结果统计规律表明,蒸汽驱油汽比不仅与地质参数有关,而且与注汽速度密切相关。

    youdao

  • Objective To increase the one-time successful injection rate of Benzathine Benzylpenicillin injection, lighten the pain caused by injection and decrease partial sclerosis.

    目的提高长效青霉素的一次性注射成功率,减轻注射时疼痛,减少局部产生硬结。

    youdao

  • Also, the IFT of water and oil, surfactant slug size, injection rate and injection opportunity on reducing injecting pressure and improving EOR efficiency are investigated.

    同时系统研究了油水界面张力大小、表面活性剂段塞大小、注入速度以及注入时机对低渗岩心降压增注和提高采收率的影响规律和特征。

    youdao

  • The results show that, as important components of electronic injector used in common rail system, orifices affect on the open rate of nozzle needle and injection rate shapes.

    结果表明:节流孔板是电控共轨喷油器的重要构成部分,既控制着唢油嘴针阀的开启速度,义控制着喷油率的形状。

    youdao

  • The results show that, as important components of electronic injector used in common rail system, orifices affect on the open rate of nozzle needle and injection rate shapes.

    结果表明:节流孔板是电控共轨喷油器的重要构成部分,既控制着唢油嘴针阀的开启速度,义控制着喷油率的形状。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定