Some coarse errors belong to instrument error can be removed easily with the statistic method.
仪表误差中粗大误差可通过统计学的方法以剔除。
The instrument error that contributes to the greatest variability is the cuff size of the sphygmomanometer.
变异性中占比例最大的设备误差是血压计袖套的大小。
Based on the inertial guidance instrument error model, the model of reentry point's parameters is established in this paper.
基于惯性制导工具误差模型，推导出存在工具误差时的再入点运动参数模型。
The mathematical models of surface profile as well as dividing the instrument error and the measurement interference are established.
本文还建立了表面轮廓和分离表面轮廓测量干扰及仪器误差的数学模型。
There are four kinds of error sources for logging data: method error, environment error, instrument error and error caused by negligence of operators.
测井数据误差来源归纳起来有四种：方法误差、环境误差、装置误差和人为误差。
The following examples of laboratory errors are considered as assignable causes, including but not limited to instrument error, observable error and confirmed observable error.
以下实验室误差的例子可认为是可确定的原因，包括但不限于：仪器错误，显著误差和经证实的显著误差等。
Often INSTRUMENT manufacturers will specify a reference with a tight initial error so they do not have to perform room-temperature SYSTEMs calibration after assembly.
仪器制造商常常先规定基准严格的初始误差，以便组装后的室温系统无需进行校准。
According to the allowance of production, the maximum error of measurement is used to determine the accuracy of the instrument.
根据生产所允许的最大测量误差来确定仪表的精确度。
In chapter four, describes the bus management, and discussed the implementation of data transfer, flow control and error control in the network-stye instrument bus.
第四章讨论总线管理，阐述了数据传输、流量控制和差错控制在网络式仪器总线中的实现。
The problem of error estimate in the primary measurement, the selection of measuring instrument accuracy and the calculation of the effective data are discussed and explained with examples.
讨论了物理实验基础知识中一次测量的误差估计、测量仪器精度的选择和有效数字运算等问题，并以实例予以说明。
Using the CCD star tracker as the ships position measuring instrument is considered much for its high positioning accuracy. no position accumulated error, fast and intelligent work.
CCD星体跟踪器作为舰船位置测量仪器，因其定位精度高、无位置积累误差、快速和智能化工作而受到重视。
Because of digit weight and digit system error modification, precision and stability of the instrument can be improved greatly.
由于采用了数字计权和数字式系统误差修正技术，仪器的精度和稳定性得到很大的提高。
Based on principle and methods of surmounted laser_beam guided instrument, guided loop and its guide error of surmounted laser_beam guided instrument were studied by using auto_control theory.
基于架束式激光制导的原理和方法，采用自动控制理论较详细地分析了激光架束制导仪的制导回路和制导误差。
A kind of calibration instrument was designed for field error calibration of tipping bucket rainfall-sensor.
设计了一种可以在现场率定翻斗式雨量传感器误差的仪器。
This instrument is used for measuring roundness, axis straightness, coaxality and circular run out error of shaft parts.
该仪器可用于圆度、轴线直线度、同轴度和径向跳动误差等项目的测量。
It provides example for error analysis and modification of virtual instrument system. It discusses the error analysis and modification of virtual noise analyzer and virtual ECG analyzer.
虚拟仪器系统的误差分析和修正方法的案例研究：讨论了虚拟式噪声分析仪、虚拟式心电分析仪的误差分析和修正。
Analysis and operational Suggestions are made on measurement error of moving-coil instrument for thermo -coupling resulted from abnormal operating conditions.
本文分析了配热电偶用动圈式仪表在非正常使用条件下产生的测量误差，并提出了操作建议。
It is distinct from the operating range, within which the instrument will provide a measurement but the error is not well-defined.
测量范围和工作范围不同，在工作范围内，仪器可以测量但是不能很好地定义误差。
When the error of measurement instrument is known, the simulation approximate precision of the model was studied. The result is satisfactory.
研究了在已知测量仪器误差的情况下模型的拟合精度，得到了较为满意的结果。
The micro Angle error between optical coordinate and mechanical datum coordinate of robot vision instrument due to mechanical assembly can be corrected by high accuracy calibration.
机器人视觉仪器由于机械安装引起的光学坐标系与机械基准坐标系之间的微小的角度误差可以通过高精度标定修正。
Error code instrument is a basic test instrument to estimate channel performances.
误码仪是评估信道性能的基本测量仪器。
This instrument can be used for centering during edging and cement, and testing centering error of lenses.
该仪器可用于磨边或胶合定中心和检验透镜中心误差。
Applying computer error revision technique, the instrument can obtain higher measure accuracy.
使用计算机误差修正技术，又进一步提高了仪器的测角精度。
The structures of virtual roundness error measuring instrument, the data acquisition circuit of single chip microcomputer and the PC data processing software were introduced.
介绍了虚拟圆度误差测量仪的构成、单片机数据采集电路及PC机数据处理软件。
In this article the design method of the intelligent pressure measurement instrument and analysis of error arid the application are introduced.
本文主要介绍智能压力测量仪的设计方法、误差分析及应用。
A method of measuring TD-SCDMA signal frequency error based on virtual instrument is proposed.
提出了一种基于虚拟仪器的精确测量TD - SCDMA信号频率误差的方法，并给出了系统设计。
The accuracy and error of the instrument are analyzed as well.
并对仪表的精度与误差进行了分析。
The accuracy and error of the instrument are analyzed as well.
并对仪表的精度与误差进行了分析。
应用推荐