Yes, willpower can produce short-term change, but it creates constant internal stress because you haven't dealt with the root cause.
的确，意志力可以带来短期的改变，但因为你没有先处理问题的根源，结果反而引起内在持续的压力。
It was previously suggested that growth in the midribs might provide enough internal stress for the petals to burst out of their casing.
过去人们认为是花瓣中脉的生长产生了足够的内部张力让花瓣从花蕾中伸展开来。
For more than a century researchers have known the basics of how limestone caves form: a tiny fracture opens in the rock perhaps due to some internal stress and water begins percolating through it.
超过一个世纪以来，研究者就懂得石灰岩洞形成的基本原理：可能由于内部的压力，石头上出现了微小的裂缝，然后水开始渗透。
For more than a century, researchers have known the basics of how limestone caves form: a tiny fracture opens in the rock, perhaps due to some internal stress, and water begins percolating through it.
超过一个世纪以来，研究者就懂得石灰岩洞形成的基本原理：可能由于内部的压力，石头上出现了微小的裂缝，然后水开始渗透。
The research was carried out on the basis of CSR to measure creep internal stress.
采用CSR法对蠕变内应力的测试进行了研究，并在材料试验机上实现了CSR法的蠕变内应力测试。
The machine is made from all steel, vibration treated roil to reduce internal stress.
结构为全钢焊接结构，经振动时效处理。
The changing of EME strength reflects the changing of internal stress after excavation.
巷道开挖后内部应力变化的快慢表现在EME强度的变化上。
The internal stress of the joined materials was only several MPa according to the result of calculation.
应力计算结果得出焊接件中只有数兆帕的拉应力。
Moreover, the overall stability of structure depends on the accuracy of penetration depth and internal stress.
板桩墙的入土深度和内力是否准确关系到整个码头结构的稳定性。
The mechanical damage to diamond is related to the internal stress-induced fissure under the high temperature.
出现机械损伤的原因，除人为操作不当外，主要与高温下金刚石因存在内应力而产生的机械破裂有关。
Thus, the products are easy to suffer from short molding, scorching, excessive internal stress and other defects.
容易造成制品打不满，烧焦、内应力大等各种缺陷。
The revised equation for calculating the internal stress of radial tire was applicable to all series of radial tire.
经过本次修正后，子午线轮胎内压应力计算公式可以适应全系列子午线轮胎。
Therefore metal magnetic memory testing (MMT) equipments could be used in measuring internal stress of seamless railway.
提出金属磁记忆法可以对钢轨内应力进行定量测量。
The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip.
热轧带钢局部高点对冷轧带钢板厚和内应力分布具有重要影响。
We have developed a new process for building up thick and stable amorphous carbon films with high hardness and low internal stress.
本文研究了一种制备高硬度、低内应力、厚度高且热稳定性良好的非晶碳薄膜的方法。
The form mechanism of internal stress and the complex nature and the harmfulness of internal stress on bonding quality were discussed.
讨论了内应力的形成机理和复杂性及其对粘接质量的危害性。
The distribution of internal stress has large influence on mechanical properties of materials such ay strength and fracture toughness.
内应力的分布，对材料宏观力学性能如强度和断裂韧性，都将产生较大的影响。
The internal stress is consisting of circumferential stress and axial stress, from which the compound stress of the weld seam is derived.
该内应力由环向应力和轴向应力构成，据此推导出了焊缝处的合成应力。
The internal stress fields and the stress-magnetic anisotropies in different regions of the amorphous ribbon were calculated theoretically.
从理论上计算了非晶态薄带中不同区域的内应力场和应力磁各向导性。
It is found that the internal stress of the lining obtained by means of field monitoring is smaller than the strength of the concrete lining.
现场监测结果表明，衬砌施工后内部应力普遍较小，未超过混凝土强度。
The internal stress in diamond thin films deposited by DC plasma CVD was studied as a function of methane concentration and deposited temperature.
研究了直流等离子体化学汽相沉积（CVD）法合成的金刚石膜内应力随甲烷浓度、沉积温度的变化关系。
Lower molecular weight and broader molecular weight distribution in thermoplastics favor lower orientation and reduced internal stress in moldings.
在热塑性塑料中较小的分子量以及较宽泛的分子量分布促成方向性减少同时降低注塑件中的内应力。
Variation and failure of the grinding ball of high chromium white cast iron during production and service are mainly caused by the internal stress.
内应力是造成高铬白口铸铁磨球在生产和服役过程中出现变异和失效的主要原因。
The combined action of the applied and internal stress has brought about the formation of dislocation patterns in the process of plastic deformation.
金属塑性变形过程中，外加应力和内应力的共同作用导致位错组态的形成。
The computation of static model and dynamic model show that the internal stress of the rubber pad concentrates at the corner of the stress-bearing surface.
静态模型和动态模型计算结果表明，橡胶垫内部应力集中出现在受力面转角处。
The present paper analyzed the reasons of heat treatment distortion of carburizing and hardening components and the formation process of the internal stress.
介绍了渗碳淬火零件热处理畸变的原因，分析了热处理内应力的形成过程。
As this toughened internal stress is a kind of permanent stress, it can not produce the internal stress attenuation with elongation of the product service time.
由于这种钢化内应力是一种永久应力，随着产品运行时间的延伸，它不会产生内应力衰减现象。
As this toughened internal stress is a kind of permanent stress, it can not produce the internal stress attenuation with elongation of the product service time.
由于这种钢化内应力是一种永久应力，随着产品运行时间的延伸，它不会产生内应力衰减现象。
应用推荐